Inline FabricationMidSouth Shooters SupplyTitan ReloadingLee Precision
Load DataSnyders JerkyReloading EverythingRotoMetals2
Wideners Repackbox
Results 1 to 6 of 6

Thread: LTB Lube

  1. #1
    Boolit Bub
    Join Date
    Dec 2011
    Location
    Alabama
    Posts
    35

    Smile LTB Lube

    I have seen where allot of castrs use the LTB blue lube, where do you buy it? Can you buy it in hollow stick form-I use the RCBS luber sizer? What does it cost? I had been using Rooster Red hard lube with a heater.

  2. #2
    In Remembrance



    curator's Avatar
    Join Date
    Mar 2006
    Location
    Fort Myers, Florida
    Posts
    1,383
    LBT lubes are available in solid and hollow stick form. Here's a link to their catalog:
    http://www.lbtmoulds.com/
    I use both the blue and blue-soft lube. Personally, I think they are great, particularly at high velocity/pressure. Another benefit is reduced to no leading as long as your bullets fit the bore.

  3. #3
    Boolit Bub
    Join Date
    Dec 2011
    Location
    Alabama
    Posts
    35
    Thanks for the come back, I will give it a try.

  4. #4
    Boolit Master

    Join Date
    Mar 2005
    Location
    south western pennsylvina
    Posts
    3,413
    Ive used LBT commercial since they began selling it way back possibley 20 + years ago , for the past 20+ years ive been using hard lubes. first red rooster then thompson and magnma , hard lubes, i now use Lars CR-hard for reg velocity cast bullets and LBT- C for high velocity rifle & pistol.

  5. #5
    Boolit Master at Heaven's Range GARCIA's Avatar
    Join Date
    Jan 2009
    Location
    Newnan,GA
    Posts
    498
    Been using the LBT Blue for a couple of years.
    Little bit of heat and it works great.
    If you don't have a heater the soft works good.

    Tom

  6. #6
    In Remembrance
    GRUMPA's Avatar
    Join Date
    Nov 2010
    Location
    Concho Az
    Posts
    2,161
    I just wish someone could crack the recipe on that stuff.
    Click to see what I'm doing and have available, this takes you to the VS (Vendor Sponsor) section of the site. Currently..25Rem,30Rem, 32Rem, 35Rem, 257Roberts, 358Win, 338Fed, 357 Herrett, 30 Herrett, 401 Winchester, 300Sav, 221 Fireball, 260Rem, 222Rem, 250 Savage, 8mm Mauser (AKA 8x57), 25-20WCF

    Annealing Services

    http://castboolits.gunloads.com/foru...php?117-Grumpa






Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check