Inline FabricationADvertise hereRepackboxRotoMetals2
Titan ReloadingLee PrecisionWideners

Page 1 of 2 12 LastLast
Results 1 to 20 of 28

Thread: KAL Steel Cam Lever for Lyman Moulds

  1. #1
    Master Tool & Die Maker


    Red River Rick's Avatar
    Join Date
    Jun 2006
    Location
    Winnipeg, Manitoba, Canada.
    Posts
    1,172

    KAL Steel Cam Lever for Lyman Moulds

    KAL T&D "Steel" Cam Lever for Lyman 4 Cavity Moulds.



    Tired of pounding your Lyman 4 Cavity sprue plate with a stick or mallet? You won’t be anymore with this new Sprue Cutter Plate and Steel Cam Lever.

    This combination will greatly increase your bullet casting productivity with less hassle and trouble free operation.

    This heavy duty replacement combo is similar to Lee’s original concept offered on their 6 cavity moulds. This new Sprue Plate & Cam Lever combo has been designed to offer sufficient “Cam Duration”, ensuring cleaner cuts with less physical force. The Cam/Mould block bearing surface is large enough to help reduce wear on the mould blocks as well.

    All cam levers are laser cut from 5/16” steel plate and CNC machined to finished dimensions. Sprue Plates are laser cut from 3/16” steel plate and CNC machined as well. Blue /Black finish, comes with wooden handle & ferrule.

    Simple to install, just swap the original sprue plate with the new one, using the factory original shoulder bolt (new spring washers included). It couldn’t be any easier.





    Lifetime Guarantee against Breakage (Cam lever only).
    If you break this lever, I’ll gladly send you a free re-placement.




    I have a small limited number of these on hand. Send me a PM with yours want and I will send you payment information.


    I am offering two styles, with and without the trough, prices are:

    $34.00 each w/o trough
    $36.00 each w/trough



    Available with two sprue holes sizes, 0.125" - 0.130" (Small Hole)
    and 0.150" - 0.156" (Large hole).

    The small hole is for .40 cal and under, the larger hole is for .41 cal and larger.
    State your needs, price is the same.


    Shipping, cheapest method offered by Canada Post is Small Packet Surface:



    Contact me for exact shipping costs to your address or other shipping options (insurance, tracking, etc.).


    Rick Kalynuik
    KAL Tool & Die
    Last edited by Red River Rick; 04-11-2013 at 10:12 PM.
    "I Make the part.............................that makes the parts"

    Looking for Bullet Mould Handles, Heavy Duty Replacement Sprue Plates, Adjustable Paper Patch Bullet Moulds? Check here:http://www.kal.castpics.net/

    My Feedback!

    http://castboolits.gunloads.com/show...Red-River-Rick

  2. #2
    Boolit Master
    Join Date
    Nov 2008
    Location
    Mokane, MO, USA
    Posts
    918
    I'll take 2! No trough and small hole. Thanks, Billy
    Lyman 22596,225107,225353,225438,225415,225450,225646, 225462,228367,244203,245496,245497,245498,245499 RCBS 22-55-SP,22-55-FP,243-95-SP,243-100-FP, NEI 100244GC-#14, 55 224 GC-#4,225 45-#3 PB, NOE 22-055 SP,MX2-243,Saeco 221 & 243, RD TLC225-50-RF,Lee 22 Bator 6c & 2c HP. Love casting small boolits, let me know if you have one that I don't that you would part with!

  3. #3
    Boolit Buddy
    Join Date
    Feb 2008
    Location
    South Louisiana
    Posts
    160
    I'll take one. Small hole no trough. How do we pay?
    "He who walks with the wise grows wise,
    but a companion of fools suffers harm."
    Proverbs 13:20

  4. #4
    Boolit Master


    Walter Laich's Avatar
    Join Date
    Aug 2005
    Location
    Cypress, Republic of Texas
    Posts
    3,211
    I'll take two

    Trough and large hole

    As Wilson mentioned let me know how to pay for these. I'll email you with my address

    thanks
    walt
    Last edited by Walter Laich; 01-05-2012 at 06:42 PM. Reason: further info added
    NRA Life
    USPSA L1314
    SASS Life 48747
    RVN War Games, 2nd Place

  5. #5
    Master Tool & Die Maker


    Red River Rick's Avatar
    Join Date
    Jun 2006
    Location
    Winnipeg, Manitoba, Canada.
    Posts
    1,172
    Gents:

    Send me a PM with your wants and I'll get back to you with payment information.

    RRR
    "I Make the part.............................that makes the parts"

    Looking for Bullet Mould Handles, Heavy Duty Replacement Sprue Plates, Adjustable Paper Patch Bullet Moulds? Check here:http://www.kal.castpics.net/

    My Feedback!

    http://castboolits.gunloads.com/show...Red-River-Rick

  6. #6
    Boolit Master
    Doc Highwall's Avatar
    Join Date
    May 2007
    Location
    Ct
    Posts
    4,624

    Talking

    PM sent.

  7. #7
    Boolit Master
    Join Date
    Apr 2006
    Posts
    1,194
    I will take one, for 4 cavity 45acp Lyman mold , with trough please

  8. #8
    Master Tool & Die Maker


    Red River Rick's Avatar
    Join Date
    Jun 2006
    Location
    Winnipeg, Manitoba, Canada.
    Posts
    1,172
    I have lot's of these in stock, either style or hole size, ready for shipping

    RRR
    "I Make the part.............................that makes the parts"

    Looking for Bullet Mould Handles, Heavy Duty Replacement Sprue Plates, Adjustable Paper Patch Bullet Moulds? Check here:http://www.kal.castpics.net/

    My Feedback!

    http://castboolits.gunloads.com/show...Red-River-Rick

  9. #9
    Boolit Master


    Walter Laich's Avatar
    Join Date
    Aug 2005
    Location
    Cypress, Republic of Texas
    Posts
    3,211
    got a pm to you for another spur plate and a pair of handles

    walt
    NRA Life
    USPSA L1314
    SASS Life 48747
    RVN War Games, 2nd Place

  10. #10
    Master Tool & Die Maker


    Red River Rick's Avatar
    Join Date
    Jun 2006
    Location
    Winnipeg, Manitoba, Canada.
    Posts
    1,172
    Gents:

    I have lots in stock, both hole sizes and with or without the trough.

    If your interested, send me a PM with your wants and mailing address. I'll get back to you with a total.

    I also have handles to fit the Lyman 4 cavity moulds as well.

    RRR
    "I Make the part.............................that makes the parts"

    Looking for Bullet Mould Handles, Heavy Duty Replacement Sprue Plates, Adjustable Paper Patch Bullet Moulds? Check here:http://www.kal.castpics.net/

    My Feedback!

    http://castboolits.gunloads.com/show...Red-River-Rick

  11. #11
    Boolit Man swiss 96/11's Avatar
    Join Date
    Feb 2008
    Location
    FLORIDA
    Posts
    94

    Lyman sprue cutter

    I would like one, small hole,no trough.Thanks

  12. #12
    Master Tool & Die Maker


    Red River Rick's Avatar
    Join Date
    Jun 2006
    Location
    Winnipeg, Manitoba, Canada.
    Posts
    1,172
    Another bump.

    RRR
    "I Make the part.............................that makes the parts"

    Looking for Bullet Mould Handles, Heavy Duty Replacement Sprue Plates, Adjustable Paper Patch Bullet Moulds? Check here:http://www.kal.castpics.net/

    My Feedback!

    http://castboolits.gunloads.com/show...Red-River-Rick

  13. #13
    Boolit Master
    Join Date
    Feb 2007
    Location
    New Jersey
    Posts
    510
    Your jacketed bullets for the .401 WSL look great. Too bad about shipping problems to the USA.

  14. #14
    Boolit Master


    Join Date
    Jan 2007
    Location
    Highland, Arkansas
    Posts
    1,559

    Cam Lever Review

    I have been using two of these for some time now. They are nothing short of fantastic. Combine a set of Rick's handles, which are also fantastic, with the new sprue plate and cam lever, and it is just not the same mold. The sprue plate is way better than the Lyman plates. In my opinion, the Lyman plates are the weakest link in the Lyman four cavity molds. Rick's are way, way better. Maybe the best word to describe the transformation is "smooth" The combination of the handles, cam lever and sprue plate totally transforms the casting experience with one of these molds. Speed is significantly increased, and it is a whole lot smoother leading to better bullets and less rejects. It is one of those things where during the process of using it, you begin to appreciate just what a quality product it is.

    Conclusion: I have always been a fan of Lyman four cavity molds. I didn't think they needed improving. But I have always liked the Lee cam lever system, so when Rick first offered these I ordered two. They are way better than I expected. Now I don't want to cast without them. Which leads to....

    My Problem: I have almost 40 of these molds. There is no way I can afford a lever for each. But I will be trying to add a lever to a couple of the ones I use more often, when I can afford it.
    looking for the following:
    Lyman 429106, 358425 - 121 grain version
    4 Cavity Lyman 358344

    [/COLOR][/SIZE]

  15. #15
    Boolit Master
    rintinglen's Avatar
    Join Date
    Jul 2007
    Location
    Orange, VA NOW
    Posts
    4,567
    I too purchased a pair of these and have had excellent results. They make sprue cutting easy and the fit is superior. I wish I could afford about 10 more of these, but for now I make do swapping them as needed.
    _________________________________________________It's not that I can't spell: it is that I can't type.

  16. #16
    Boolit Man
    Join Date
    Nov 2009
    Location
    Consett County Durham UK
    Posts
    87
    pm sent

  17. #17
    Boolit Man
    Join Date
    Nov 2009
    Location
    Consett County Durham UK
    Posts
    87
    Got mine today - excellent quality workmanship. I'll be trying them out tomorrow.

  18. #18
    Boolit Man
    Join Date
    Aug 2011
    Location
    ZARAGOZA-SPAIN-
    Posts
    79
    I sent payment in three weeks ago, and i have no answer at this time.....

  19. #19
    Boolit Buddy
    Join Date
    May 2011
    Location
    Colorado Springs, Co
    Posts
    303
    Me Too. I sent cash the first week of Nov. he did pm me and say that mail is slow from Canada to USA but wow.
    EDIT: Mine is for a Lee 6 cavity mold.

    Quote Originally Posted by el general View Post
    I sent payment in three weeks ago, and i have no answer at this time.....
    Let's make AMERICA Great again!!!

  20. #20
    Master Tool & Die Maker


    Red River Rick's Avatar
    Join Date
    Jun 2006
    Location
    Winnipeg, Manitoba, Canada.
    Posts
    1,172
    El General & Roger Ronas:

    As per our PM's, the confussion has been cleared up.

    My apologies.

    RRR
    "I Make the part.............................that makes the parts"

    Looking for Bullet Mould Handles, Heavy Duty Replacement Sprue Plates, Adjustable Paper Patch Bullet Moulds? Check here:http://www.kal.castpics.net/

    My Feedback!

    http://castboolits.gunloads.com/show...Red-River-Rick

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check