NOE 503 Ross Multi-Weight WFN

[SwedeNelson]

NOE 503 Ross Multi-weight WFN
Here is the link to the discussion thread:
http://castboolits.gunloads.com/showthread.php?t=136065







This bullet was designed to be a PB only bullet.

Will get this buy on the schedule as soon as we have 15 orders.
We will keep the buy open until 2 or 3 weeks before the date on the schedule.
At that time we will close the buy and send out a PM with
a request for payment. We don’t require payment before then.

This buy will be on our LB (Large Bore) moulds.
2 cavity mould cut in a 3 cavity block
3 cavity mould cut in a 4 cavity block
And 4 cavity mould cut in a 5 cavity block

Prices will be as follows:
Single cavity mould (Standard Size mould) $68.00 Ea.
LB2 cavity mould $78.00 Ea.
LB3 cavity mould $84.00 Ea.
LB4 cavity mould $91.00 Ea.
LB RG2 cavity mould $102.00 Ea.
LB RG4 cavity mould $132.00 Ea.

Plus $10.00 Shipping/Handling.
Foreign orders are a additional $10.00
Prices are subject to change at any time.

We will only offer this buy with one size per block.
And one mixed size, 4 cavity with one each 640Gr., 590Gr.,
540Gr. and 440Gr.

You can mix number of cavities in an order to make 15.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

Hollow pointing one cavity and furnishing a double
ended pin would be $35.00 Extra.

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3.5% sir-charge.
Pay-Pal account:
pbsco1@qwestoffice.net
Make checks and money orders out to:
NOE Bullet Mould

Our mailing address is:
NOE Bullet Moulds
1645 W 150 N
Provo, Utah 84601
801 377-7289

Thank you for your interest in this buy.
Swede Nelson

[SwedeNelson]

List of orders
*1 happy7 4 cavity PB 540Gr.
*2 IllinoisCoyoteHunter 4 cavity PB 540Gr.
*3 John Ross 4 cavity PB 440Gr.
*4 John Ross 4 cavity PB 490Gr.
*5 John Ross 4 cavity PB 540Gr.
*6 John Ross 4 cavity PB 590Gr.
*7 John Ross 4 cavity PB 640Gr.
*8 John Ross RG4 cavity PB 440Gr.
*9 John Ross RG4 cavity PB 490Gr.
*10 John Ross RG4 cavity PB 540Gr.
*11 John Ross RG4 cavity PB 590Gr.
*12 John Ross RG4 cavity PB 640Gr.
13 MajorJim RG4 cavity PB 490Gr.
14 MajorJim RG4 cavity PB 640GR.
*15 shawnsmc RG2 cavity PB 440Gr.
*16 shawnsmc RG2 cavity PB 490Gr.
*17 shawnsmc RG2 cavity PB 540Gr.
*18 shawnsmc RG2 cavity PB 590Gr.
*19 shawnsmc RG2 cavity PB 640Gr.
*20 jeeedbb 4 cavity PB w/(1) ea 640 590 540 440Gr
*21 jeeedbb RG4 cavity PB 540Gr.
*22 timbuck RG4 cavity PB 490Gr.
*23 lup RG4 cavity PB 440Gr.
*24 lup RG4 cavity PB 490Gr.
*25 lup RG4 cavity PB 540Gr.
*26 lup RG4 cavity PB 590Gr.
*27 lup RG4 cavity PB 640Gr.
*28 big bore nut RG4 cavity PB w/(1) ea 640 590 540 440Gr
29 Spartacus 4 cavity PB 440Gr.
30 Spartacus 4 cavity PB 490Gr.
31 Spartacus RG4 cavity PB 540Gr.
*32 captain awesome RG2 PB 640Gr.
33 Heath2 4 cavity PB w/(1) ea 640 590 540 440Gr
34 ohiomadman 4 cavity PB w/(1) ea 640 590 540 440Gr
*35 Redwoode RG4 cavity PB w/(1) ea 640 590 540 440Gr drill for probe Mould Mallet
*36 midnight 3 cavity PB 490Gr.
*37 midnight 3 cavity PB 590Gr.
*38 captain-03 RG4 cavity PB w/(1) ea 640 590 540 440Gr
*39 Lordofthesmokingmirror 4 cavity PB w/(1) ea 640 590 540 440Gr
*40 15bobcat 4 cavity PB w/(1) ea 640 590 540 440Gr drill for probe
*41 Indio 4 cavity PB 640Gr.
*42 MarcusT RG4 cavity PB w/(1) ea 640 590 540 440Gr
*43 Speedjunke RG4 cavity PB w/(1) ea 640 590 540 440Gr
*44 Speedjunke 4 cavity PB w/(1) ea 640 590 540 440Gr
*45 Paulinski RG4 cavity PB w/(1) ea 640 590 540 440Gr
*46 Paulinski RG2 PB 490Gr,
*47 FLYCUTTER RG4 PB 540Gr.
48
49
50
51
52
53
54
55
56


(*) = Paid

Thanks for the orders
Swede Nelson

[happy7]

I will get us started with one LB4 540. Thanks!

[IllinoisCoyoteHunter]

You better put me down for a 4-cavity 540 grain mold. Thanks!

[John Ross]

One regular 4-cavity mold of each weight and one 4-cavity RG hollow point mold in each weight.

Ten molds total.

[MajorJim]

One LB4 cavity mold in 590

[shawnsmc]

Can I get 1 RG2 for each weight.
Total of 5 RG2 molds
Thanks,
Shawn

[captain-03]

Dumb question -- what does RG stand for?

[IllinoisCoyoteHunter]

It is not a dumb question. I answered it the other day for another member:

http://castboolits.gunloads.com/show...32&postcount=2

[SwedeNelson]

That puts us over the top (15 orders).
Will get us on the schedule.

IllinoisCoyoteHunter
Great explanation, thank you!

Swede Nelson

[timbuck]

How big will the hollow point be? With the RG?
In grains in weight and size?

[jeeedbb]

I would like

1 LB4 - 4 cavity with one each 640Gr., 590Gr., 540Gr. and 440Gr.

1 LBRG - 4 cavity - xxx please change to 490.

Well pm tonight

Thank you,

Jeeedbb

[captain awesome]

what will he hollow point look like on the rg's? also will the rg4 be available with the 4 weight mold?

[jeeedbb]

Thanks for the post IllinoisCoyoteHunter.

I think I understand how it works, is it more difficult to cast with the RG's (flat points) as opposed to a LB? Are the pins stationary for the flat point configuration?

Thanks,

[timbuck]

LB4 cavity mould $91.00 Ea.
500/490gr WFN

[IllinoisCoyoteHunter]

No the flat point pins are not stationary. They also slide on the tracks. With the flat point pins it is not necessary to flip the mold upside down. Just cast as you would with a standard mold. A lot of times the pins won't slide out of the cavity and the boolits just fall right out when you open the mold halves.

There is nothing hard about casting with these molds. After about 5 minutes you will be casting hollowpoints faster than you ever imagined.

[MajorJim]

If it won't screw things up, I'd like to change my order from a PB 490 to one LB RG4 cavity mould $132.00 Ea. in 490 and one LB RG4 cavity mould $132.00 Ea. in 640.

[lup]

One LB RG4 cavity mould in each weight.

[41 mag fan]

Al,
Put me down for a 2 cav of each weight please.

[jeeedbb]

Good deal. Thanks IllinoisCoyoteHunter.