Could someone give me their input on a HP mold for the 50 Beowulf please?
I was thinking in the 350-400gr range, but don't know if that would be best.
Thank you for any and all advise,
Barry
Could someone give me their input on a HP mold for the 50 Beowulf please?
I was thinking in the 350-400gr range, but don't know if that would be best.
Thank you for any and all advise,
Barry
the trick is FINDING one, not enough interest to get a second group buy done, and the first buy is sold out, at least on the several molds I have tried..... I scored a used MiHec that I love but more is always better.
Dan
Wow. I never wanted one before I saw that picture.
Visit my page at www.echoarms.com for casting, reloading, and firearms accessories as well as FFL services in Southern California.
Like my Facebook page: Echo Arms
Thank you Geargnasher, and Greywuuf,
I did get in touch with x101airborne.
Ja, ya gotta love a hollow point that is over 30 caliber wide inside. LOL!
I was lucky that Al "Swede" Nelson is such a nice guy that when I mistakenly signed up for a 513 diamater mold, he corrected my assumption and cut me two completely custom molds. He may have a couple on the shelf, as when he cut mine, he theorized there would be more interest in the cartrige to come in the near future. I have been casting them from 25% WW, 75% pure, +2% tin. Expansion is incredible. Penetration is equally as impressive. I have only done wet sand tests, and am still waiting to shoot a breathing being with em. I am using 500 smith data minus 10%. I dont know if this is right, it is just what I am using. If published data is correct, my 450 grainers at 2000 fps should give 3200 foot pounds energy at the muzzle. Should be the equivalent of an internal hand grenade for pigs.
I came into this world kicking, screaming, and covered in someone elses blood. I plan to go out the same way.
That is one awsome hp.
This country has gone to hell but now there is hope for us.
X101airborne please pm me id like some info on that mold I want one bad
COME AND TAKE THEM!!
accurate molds makes a very close copy, see the 50-400E design.
He'll even cut it without the crimp groove.
we're still trying to get enough people together for a new MiHec GB - up to 18 now.
Oh, and Great Zombi work here
Id love one get me on that list
COME AND TAKE THEM!!
Mmmm brains
COME AND TAKE THEM!!
Could this boolit work in the 500 s&w mag? boolit looks evil and Id love to have some for my 500's
Gear, I want that mold! I have seen flying ashtrays but that is nuts...
Looks like a ramset could be glued right in without issue.
how do I get my hands on that mould?
I have been using this 400g GC hollow point in my BW. It is also ubef effective.
what are the specifics on the mold pictured above? I cant find one that looks identical on NOE.. Thanks
Well if someone could give the specs/drawing on the mold and If I can count correctly 9 people have stated they would love to get one, I would love 2 as well so we could get Al to do another run unless he has changed the minimum needed from 10...
I would definitely be interested in that mold.All i can say is wow..
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |