Just got a lyman 45 lube sizer that needs work. I am close to making it work, but need to know what dies will work on this and a list to id. top punches or any helpfull info.
THANKS
Just got a lyman 45 lube sizer that needs work. I am close to making it work, but need to know what dies will work on this and a list to id. top punches or any helpfull info.
THANKS
Keep your powder dry....blackbike
:takinWiz:
Regular Lyman and RCBS dies and top punches will work.
The dies are held by a set screw in the front of the body. JUST be darn careful not to over tighten as you will crack the housing!!!
Visit my projects at: http://cheese1566gunsandstuff.shutterfly.com/
Lyman 45 and Lyman dies. RCBS will work, as well, though some casters have found they don't.
Lyman's Cast Bullet Handbook third edition, has a Lyman mould/top punch cross reference.
Thanks found that list in lyman 3rd.
and good tip on set screw.
Keep your powder dry....blackbike
:takinWiz:
I was wondering the same thing. I'm trying to get a Lyman 45 back into a working condition as well.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |