Inline FabricationLoad DataMidSouth Shooters SupplyLee Precision
Titan ReloadingWidenersRepackboxReloading Everything
RotoMetals2
Page 1 of 18 1234567891011 ... LastLast
Results 1 to 20 of 356

Thread: 462 Hammer GC Mihec Cramer HP

  1. #1
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099

    462 Hammer GC Mihec Cramer HP

    462 Hammer GC Mihec Cramer HP
    This is a run of an earlier Lee GB. This will be a two cavity, single crimp groove, GC cramer brass mold that is suitable for the 45-70, 450 Marlin and like 45 caliber rifles as well as 45 caliber handguns. It will cast at 0.462", 0.357" meplat to crimp groove and a 0.379" meplat. It sizes easily to 0.452/0.454". The following is the discussion thread.

    http://castboolits.gunloads.com/showthread.php?t=132501

    We will need fifteen to commit to this. We will run this until we get the number we need. I will find out what MiHec wants to do this, but I expect it will be similar to all the others. MiHec gave these prices. Price is $85 with one set of pins included plus $10 for each extra pin set plus $15 shipping. Should anybody not want all the pins, I will need an update on individual pin sets.

    Pin options: 1) small HP, 2) large HP, 3) penta HP, 4) blank pin for flat nose Edit: If the HP pins are not suitable for reversal to a solid, the blank pins come with the price of the mold. If you do not want the HP pin sticking out of the base of the mold, in the case of reversable pins, you can order a set of blank pins for a smooth mold bottom.

    Weights, ready to load: small hp 326 gr., large/penta hp 314 gr., solid 337 gr.

    Please list your Forum name and your e-mail address in suitable form and the pin options you think you want.

    This GB is Closed........

    1. greywuuf.....greywuufATgciDOTnet..... One mold with large, small and penta pins
    2. Chuck4570.....chuckdoa2002atyahoodotcom small, large, penta pins and blank pin for flat points.
    3. DanWalker.....crowshooter223 at hotmail dot com.....
      One mold with large HP pin and a blank pin for flat points.
    4. no34570 at gmail dot com..... One mold with small, large, penta pins and blank pin for flat points.
    5. Johnch at Refugemail Dot com.....One mold with small, large, penta pins
    6. gvest67 at yahoo dot com.....One mold with small, large, and penta
    7. bardisattva at gmail dot com.....One mold with all pins, including blank pin for flat points.
    8. GREETINGS from Sprue U ... captbly at min dot midco dot net.....One mold with penta & blank pins
    9. Dutch4122 (at) yahoo (dot) com.....One 2 cavity mold, with a set of small H/P pins and a set of blank pins for flat points.
    10. davebz63 at aol dot com.....Onme mold with sm,lg and the blank pins for flat points.
    11. jasonlfreeman at bellsouth dot net.....One mold with all four pin options.
    12. martin underscore bridgwater at hotmail dot com.....One mold with all four pin options as well.
    13. g underscore blomquist at msn dot com.....One mold with small & large pins.
    14. DSMJon at gmail dot com.....One mold with all pins please.
    15. brsterritt(AT)yahoo(DOT)com.....One mold with all Pin options
    16. c dot robinson7 at cox dot net.....One mold with all pins
    17. namovlov at bigpond dot com.....One mold with all pins
    18. pdj at shaw dot ca.....One mold with sm,lg and the solid pins
    19. charles unnderscore nuss aaat yyaaahooo dott coom.....
      One mold with all pins
    20. PB emack 9 at em barq mail dot com.....One mold with all pins
    21. Wilson.....hickmangroup at gmail DOT com......One mold with small HP pins, large HP pins and blank pins
    22. midnight rwhyte at wi dot rr dot com.....One mold with all four pin sets
    23. gocaptainawesome at hotmail dot com.....One mold with blank, small and large pins
    24. gllewis at pasadena dot edu.....One mold with small and large pins
    25. aatwood2 at tx dot rr dot com.....One mold with all pins
    26. mopedmedic AT hotmail DOT com.....One mold with all pins
    27. bodydoc447 at aol dot com.....One mold with small pins
    28. LeadBrain.....t m j 9 5 at t d s dot n e t.....One mold with all pins
    29. gmsharpsatcsdotcom.....One mold with all pins
    30. Smallmouth Dot Catcher at yahoo Dot Com.....One mold with large and blank pins
    31. XXXXX
    32. gitu1 f dot farmer56 at gmail dot com.....One mold with penta and blank pins
    33. lebconstruction at gmail dot com.....One mold with small and blank pins
    34. danann00 at bellsouth dot net.....One mold with small pins
    35. anders at rothman dot it.....One mold with penta pin
    36. Trmenezes7@gmail.com .....One mold with all pins
    37. whiteeagle1 at charter dot net..... One mold with penta pins
    38. fivegunner.....fivegunner-at sbcglobal-dot nett sbcglobal-dot net.....One mold with all pins
    39. Ozarklongshot.....Stoneaxe42 at Yahoo dot com.....One mold with small and penta pins
    40. HiVelocity.....HiVelocity03 at aol dot com..... One mold with small and large pins
    41. HighHook.....pvolkman3 at gmail dot com.....One mold with small and large pins
    42. 63 Shiloh.....mikerolly at hotmail dot COM.....One mold with small and penta pins
    43. Jester Grin 1.....cstewart8 at satx . rr . com.....One mold with small and blank pins
    44. JDK.....jacknjenn16 at aol dot com.....One mold with large and blank pins
    45. twiggs1.....toyon.wiggs at gmail.....One mold with all pins
    46. MK1MICAH.....OLD-SCHOOL-VEEDUB@HOTMAIL.COM.....
      1 mold with all pins
    47. tbhutton.....tomhuttton AT comcast DOT net.....One mold with blank and large penta pins.
    48. rhadamanthos12.....kamisama12 at gmail dot com.....One mold with all pins
    49. Ed K.....mvesk at yahoo dot com.....One mold with small and large pins.
    50. JeffHolt.....Jeff AT Appalachian Ammo DOT com..... One mold with small HP pins.
    51. nanuk.....nanuk at sasktel dot net.....One mold with all pins.
    52. Gelandangan.....Gelandangan AT yahoo dot com.....One mold with all pins
    53. WKAYE.....nkaye(@)nbnet(dot)nb(dot)ca.....One mold with small HP and blank pins.
    54. crash87.....ktlachac at aol dot com.....One mold with small HP pins.
    55. 69papatango.....papatango1969(at)gmail(dot)com.... .One mold with small, large and blank pins.
    56. wlc.....walter (at) mtaonline dot net.....One mold with all pins
    57. doctorggg.....gggmmg at verizon dot net.....One mold with large HP and blank pins.
    58. werepyr.....werepyr at yahoo dot com.....One mold with all pins
    59. alrighty.....restorerancientiron at gmail . com.....One mold with all pins
    60. FLYCUTTER.....FLYCUTTER runderscorekarkATattDOTcom..... One mold with all pins.
    61. codeNshoot.....ryan"underscore"lombardo at yahoo dot com .....One mold with small pins.
    62. danny.k.....deerhunter at telia dot com.....One mold with penta HP and blank pins.
    63. Idmcrook.....mjcrookstonatmsndotcom.....One mold with all pins
    64. JakeLeg.....steffind AT grm DOT net.....One mold with all pins
    65. Slow Elk 45/70..... need email address.....One mold with all pins
    66. MDF99.....FRAROCKET (at) aol (dot) com.....One mold with small round HP pins

    Attached Thumbnails Attached Thumbnails 462 Hammer dual HP.JPG  
    Last edited by 45 2.1; 11-08-2012 at 10:51 AM.

  2. #2
    Boolit Master greywuuf's Avatar
    Join Date
    Aug 2011
    Posts
    528
    Greywuuf greywuufATgciDOTnet (1) small and Penta Pins


    OK I thought this was the actual order thing.... so I am editing. if I had MY way about this , I would have 4 pin set.... small medium large and penta the 3 sizes like in the 502 that I pictured on the discussion thread and the Penta, that MiHec has done on others.
    Last edited by greywuuf; 11-15-2011 at 05:13 AM.

  3. #3
    Boolit Man chuck4570's Avatar
    Join Date
    Aug 2009
    Location
    Upstate SC
    Posts
    94
    Chuck4570 chuckdoa2002atyahoodotcom small, large, penta pins and flat point if not reversible.
    Last edited by chuck4570; 11-15-2011 at 12:23 PM.

  4. #4
    Boolit Master

    DanWalker's Avatar
    Join Date
    Mar 2005
    Location
    Wyoming
    Posts
    1,364
    DanWalker crowshooter223 at hotmail dot com.
    I'd like a large HP pin that is reversible so I can cast regular boolits too.
    I'll be a nice to you as you'll let me be, or as mean as you make me be.

    Polite society started dying the day it was no longer necessary for rude men to physically defend themselves from the consquences of their actions or words.

  5. #5
    Boolit Master greywuuf's Avatar
    Join Date
    Aug 2011
    Posts
    528
    hmm just posting to let the Honcho know I edited my druthers in my original post. I am still waiting for confirmation on the 3 pin set like the 502 Beowulf group buy, and the availability of Penta's on this.

    Oh and DanWalker, all of the Mihec cramers I am familiar with have reversible pins sets for solid... though it leaves a protrusion that can be a problem with mold guides....if you want it Flat on the bottom you need to order Blank pins.

  6. #6
    Boolit Master
    no34570's Avatar
    Join Date
    Apr 2005
    Location
    East Gippsland,Australia.
    Posts
    1,347
    Quote Originally Posted by chuck4570 View Post
    Chuck4570 chuckdoa2002atyahoodotcom small, large, and penta pins
    I'll have the same please
    no34570 at gmail dot com
    Thank you
    Last edited by no34570; 11-15-2011 at 07:34 PM.
    Cheers

    no34570

    "I'll tell you what rule we applied sir,We applied rule 3-0-3, We caught them and we shot them, under rule 3-0-3." :Lt Harry " Breaker" Morant at his court martial in January 1902.

  7. #7
    Boolit Master

    Johnch's Avatar
    Join Date
    Jun 2005
    Location
    NW Ohio
    Posts
    3,505
    I woud also like small, large, penta pins

    Johnch

    Johnch at Refugemail Dot com


    John
    Yea, thou I walk through the valley of the shadow of death, I will fear no evil; for thou art with me; Thy rod and thy staff, they comfort me.
    And I carry a LOADED Hell Cat

  8. #8
    Boolit Man

    67bear's Avatar
    Join Date
    Feb 2010
    Location
    Michigan
    Posts
    80
    small, large, and penta for me too please

    gvest67 at yahoo dot com

    Thanks

  9. #9
    Boolit Buddy
    Join Date
    Dec 2008
    Location
    In the reloading room
    Posts
    381
    One for me also, with all pins, including blank pins if possible. Thanks.

    bardisattva at gmail dot com

  10. #10
    HONCHO EMERITUS


    Dutch4122's Avatar
    Join Date
    Mar 2005
    Location
    ??????
    Posts
    1,754
    Is this design going to cast 325 grains?

    If so, you can count me in for one.

    Thanks for running this design!
    Last edited by Dutch4122; 11-23-2011 at 06:25 PM.
    -Matt
    Group Buys Honcho'd: C326-175-FN, 434-210-RF, C434-210-RF, 30-165-SIL-MOD, 358156-PB, 413-170-Keith, C348-225-FN, 8mm SIL, 45-230-CM, 45-270-Ohaus/SWC, Edd's 28-170-FN

  11. #11
    Boolit Master greywuuf's Avatar
    Join Date
    Aug 2011
    Posts
    528
    I believe this is intended to be a 300 grain as a solid.

    Homeland defense begins at home. I'm not there. Sent from a mobile device using a commercial app.

  12. #12
    Boolit Buddy
    Join Date
    Sep 2010
    Location
    NSW, Australia
    Posts
    116
    Just what I've been looking for. I'd want one with all blank pins I think.

    bossfeller at gmail dot com

  13. #13
    Boolit Man

    67bear's Avatar
    Join Date
    Feb 2010
    Location
    Michigan
    Posts
    80
    Weights, ready to load: small hp 326 gr., large/penta hp 314 gr., solid 337 gr.

  14. #14
    HONCHO EMERITUS


    Dutch4122's Avatar
    Join Date
    Mar 2005
    Location
    ??????
    Posts
    1,754
    You can count me in on this one for sure now that we have an answer on the as cast solid weight. Thanks, Bob!

    I'll take one 2 cavity mold, with a set of small H/P pins and a set of blank pins for casting solids.

    Dutch4122 (at) yahoo (dot) com

    This should make a great deer boolit for my stainless Guide Gun.
    Last edited by Dutch4122; 11-27-2011 at 09:01 PM. Reason: Include email address for billing
    -Matt
    Group Buys Honcho'd: C326-175-FN, 434-210-RF, C434-210-RF, 30-165-SIL-MOD, 358156-PB, 413-170-Keith, C348-225-FN, 8mm SIL, 45-230-CM, 45-270-Ohaus/SWC, Edd's 28-170-FN

  15. #15
    Boolit Master greywuuf's Avatar
    Join Date
    Aug 2011
    Posts
    528
    " comment removed by poster due to excess stupidity"

  16. #16
    Boolit Master 4719dave's Avatar
    Join Date
    Apr 2010
    Location
    port charlotte fl
    Posts
    748
    I'm thinking im in on this one .GST 1895 WILL SAVE ON THE LEAD
    sm,lg and the solid pins
    davebz63 at aol dot com
    Last edited by 4719dave; 11-25-2011 at 11:14 AM. Reason: email

  17. #17
    Boolit Mold
    Join Date
    Feb 2011
    Posts
    28
    Please add me for one with all four pin options.
    Jason Freeman jasonlfreeman at bellsouth dot net

  18. #18
    Boolit Mold
    Join Date
    Nov 2011
    Posts
    14
    Please add me for one with all four pin options as well.

    Martin Bridgwater
    martin underscore bridgwater at hotmail dot com

    Sent from my GT-I9100 using Tapatalk
    Last edited by Eastwood; 11-26-2011 at 08:21 PM.

  19. #19
    HONCHO EMERITUS


    Dutch4122's Avatar
    Join Date
    Mar 2005
    Location
    ??????
    Posts
    1,754
    Looks like we're at 12 or 13 so far. Just a few more commitments and we'll have a "runner" for sure!

    -Matt
    Group Buys Honcho'd: C326-175-FN, 434-210-RF, C434-210-RF, 30-165-SIL-MOD, 358156-PB, 413-170-Keith, C348-225-FN, 8mm SIL, 45-230-CM, 45-270-Ohaus/SWC, Edd's 28-170-FN

  20. #20
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Price and list update on post #1

Page 1 of 18 1234567891011 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check