Mihec's molds come with a top punch.
Mihec's molds come with a top punch.
-Matt
Group Buys Honcho'd: C326-175-FN, 434-210-RF, C434-210-RF, 30-165-SIL-MOD, 358156-PB, 413-170-Keith, C348-225-FN, 8mm SIL, 45-230-CM, 45-270-Ohaus/SWC, Edd's 28-170-FN
I would like to get in on this if its not to late, with all the pin set option available please.
Trmenezes7 at gmaildot com
I am still new to this so just let me know what the total charge is and how to pay.
Thanks, Tim
Last edited by TMenezes; 03-16-2012 at 02:47 AM.
I would like in
whiteeagle1 at charter dot net
penta pins ....
thank you
Hit em'hard
hit em'often
please change my order to incude penta pins as well as blanks.
Thanks
any more idea on the ETA of these?
I am sorry but please remove me from this GB, for my uses a HP 45-70 is not needed.
GREETINGS from Sprue U ... captbly at min dot midco dot net penta/blank pins
When do you think this is going to fly I almost forgot about it?
I'll take one mold with all pin options.
charles unnderscore nuss aaat yyaaahooo dott coom
For anyone ordering the blank pins, please review the edit in blue in the first post to see if you want to change your choice.
I will keep just the HP pins since they are reversible.
At one with the gun.
Bttt........................................
I know this is a dumb question but can these be made in a plain base
One of three ways:
1. Reduce depth of cut in the blocks whick would leave a thinner
than normal rear band.
2. Ask MiHec to cut the GC shank out with a 0.11" rear band
length left (another special cut with extra work).
3. Another plain base cherry (which isn't going to happen here
I think).
You would need to ask him if he would do this for you.
I should have made myself more clear instead of the word made I should have used the word available. that way you wouldn't have had to go into a detailed answer just a no is all I needed but I do appreciate your answer as I said I knew it was a dumb question because I couldn't find a option for a plain base
I would like on mold with penta pins and the pins for a plain base it's much easier to use with a bottom pour
bigboredad at nschek214 ay hotmail dot com
thankyou
Last edited by bigboredad; 05-23-2012 at 09:59 PM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |