Is there a way to eliminate the static cling which makes the smokeless powder stick to the plastic on the lee funnel and other plastic products?
Thanks, Steve
Is there a way to eliminate the static cling which makes the smokeless powder stick to the plastic on the lee funnel and other plastic products?
Thanks, Steve
The Navy SEALS removed one Muslim threat to America.
It's up to the voters to remove another.
Grab a can of Static-gard and spray a little on the funnel and wipe it off. Works great for me.
hot water and dish soap, swish it around then rinse and dry.
Hate is like drinking poison and hoping the other man dies.
*Cohesiveness* *Leadership* *a common cause***
***In a gunfight your expected to be an active participant in your own rescue***
The effective range of an excuse is ZERO Meters
that's funny because for years i have had no problem and just a couple of nites ago it was bad , i tried the used dryer sheet .. no help , so i tried the fresh dryer sheet ..ditto , so i washed it with dawn and dried it , let it set for a few hours and no help .... so i dug out the ancient pacific aluminum one [sigh] i believe it's in the air , today i used a disc sander on some pvc pipe - every granule was electrostatically and evenly deposited on everything - including me . the table on the sander looked fine and white , i think mother nature needs a big can of static guard :P
Je suis Charlie
if it was easy would it be as worthy ? or as long of lasting impression ? the hardest of lessons are the best of teachers [shrugz]" To sit in judgment of those things which you perceive to be wrong or imperfect is to be one more person who is part of judgment, evil or imperfection."
Wayne Dyer
http://www.youtube.com/watch?v=WLzFhOslZPM
Wiping with a used dryer sheet (Bounce) should do it. It's recycling a used product, a really GREEN thing to do for some folks.
you are from mid west??? maybe it that the Cards are in the WS
Sun Spots.
It's those dawg-gone Sun Spots.
Or is that a racist thing to say???
I'm sooo cornfused!
My wife doesn't use dryer sheets.
But back in the vinyl dayz, I used to rinse my albums then dry, and the static was GONE!
An Audiophile friend suggested that, and by golly it worked great!
Low humidity causes static as well. If you could raise the humidity, it would "short out" the static build-up.
God Bless America!
Sittin here watchin the world go round and round...
Much like a turd in a flushing toilet.
Shoot for the eyes.
If they are crawlin away, shoot for the key hole.
NRA Life Member
CRPA Life Member
Magnificent!
The basic flaw with Science is man.
Sonnypie has the answer, Boil a Big Pot of Water on the stove to add humidity to the air, then make a pot of spaghetti and you won't go hungry in case you just have to wait it out.
Wash with Joy dish detergent, rinse and air dry
Would smile do?
Or does it have to be all out Joy?
Is there something special in the Joy that helps with the static?
Curious minds want to know...
(I have two... strike that, 3 plastic funnels that like to get static cling. A red one (Lee), a green one (RCBS), and a larger red one (Walmart? Auto Parts Store? Dumpster Diving?)
So I am open to idears.
And Moonman, I'll be right over. I LOVE bahsketti!
Should I grab a loaf of garlic bread on the way?
Last edited by Sonnypie; 10-20-2011 at 08:35 PM.
God Bless America!
Sittin here watchin the world go round and round...
Much like a turd in a flushing toilet.
Shoot for the eyes.
If they are crawlin away, shoot for the key hole.
NRA Life Member
CRPA Life Member
Magnificent!
The basic flaw with Science is man.
Bahsketti I luv that. Sounds like ya had kids at some point!
Been paddlin' upstream all my life, don't see no reason to turn around now.
"Is there something special in the Joy that helps with the static? Curious minds want to know... "
Soap. Bath bar soap works fine. Best not to rinse, just let it air dry. Soap is the 'active ingredient' that kills static in dryer sheets too.
How about powdered graphite, would that work?
The Navy SEALS removed one Muslim threat to America.
It's up to the voters to remove another.
Sounds like you have a REAL static problem....somewhere. Theoretically, if you ground the object it should dissipate the charge. I don't know if this will work, but try touching the funnel to something grounded like a cold water pipe then run some powder through it.
Hey, it's worth a shot...........
Cold Water pipe? Not when they are plastic! (PVC)
Wrap a thin wire on the cover plate screw for a receptical (Plug) and touch the item to it to discharge the static.
Big Bore = 45+
Dunno, read in some rag or other that Joy was the deal for static dissipation. Seems to help for me.
Wash the funnels with any soap detergent. Do not rinse. Air dry only. This will help the funnels. I taped a piece of dryer sheet to the inside of the powder tube almost the full lenght. Refilling the powder tube. I try to hit the powder on the dryer sheet on the way in. This has worked for me in the past.
A small aluminum funnel for a few $ will permanently eliminate the static issue....
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |