NOE 30-115grRN .30 Carbine rerun?

[101VooDoo]

Anyone else miss this one first time around? Didn't have a carbine until just recently, so I didn't pay this one any attention.

Thought this mould might be due for a re-run.

Original thread:

http://castboolits.gunloads.com/show...NOE+30-115grRN

[Alchemist]

VooDoo,

If you can live with a 2 holer, Swede still has some for sale.

http://www.castboolits.gunloads.com/...d.php?t=111326

HTH

[crawfobj]

A 5 cavity like that would be enough for me to dig my .30 carbine out of the back of the safe.

[Alchemist]

A 5 cavity like that would be enough for me to dig my .30 carbine out of the back of the safe.

BACK of the safe??? Mine is on the second row...only 'cause the long barrels get front row seating.

[crawfobj]

Mine is in the back b/c all I have is a Universal. To be perfectly honest, this mold would probably cause me to go out and get the real thing to go w/ my garand and other nicer toys.

[101VooDoo]

HTH, I was thinking more along the lines of a 5-holer.

This one had a real good response the first time around, I think we only need 5 to get a re-run.

[frankenfab]

I would buy another one. Or 2.

[tonyjones]

Would it be available in a DS10 SB?

Tony

[101VooDoo]

Tony, I'm not sure what DS10 SB is - Jim

[tonyjones]

A DS10 SB is a dual side (cavities & sprue plates top & bottom), 10 cavity, small bore mould. The small bore moulds utilize smaller blocks; ie a 4 cavity in blocks normally used in a 3 cavity. NOE offers these if the bullet is not too long. My NOE 225107 is a DS10 SB.

Regards,

Tony

[101VooDoo]

Ah, sounds like quite a mould. If we get enough interest for rerun that could be a cool option.