Updated list
Bump
UPDATE SEE POST # 84 BELOW
Thanks
Swede Nelson
Updated list
Bump
UPDATE SEE POST # 84 BELOW
Thanks
Swede Nelson
Last edited by SwedeNelson; 06-15-2012 at 01:38 PM.
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
Darn I thought it was ready earlier than that - ahhhhh
Doing a update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593
Bump
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
I'm in for a 2 cavity 1GC 1PB .314 Diameter, and please drill for probe. Payment has been sent to you via Pay-Pal.
Thanks,
-Harold
I need to amend this order to read43 Dangerdude 5 cavity 3GC 2PB .314
43 Danderdude 5 cavity 5GC .314
Thanks
Last edited by Danderdude; 07-02-2012 at 09:31 PM.
Please ADD a 4 cavity GC .314" mould to my order.
Thanks,
Doc
Looks like I need to add another mold to my order:
(1) 5 cavity .311" diameter, gas checked.[/B]
Thanks!
Last edited by Dutch4122; 10-05-2012 at 06:20 AM.
-Matt
Group Buys Honcho'd: C326-175-FN, 434-210-RF, C434-210-RF, 30-165-SIL-MOD, 358156-PB, 413-170-Keith, C348-225-FN, 8mm SIL, 45-230-CM, 45-270-Ohaus/SWC, Edd's 28-170-FN
Put me down for a four cavity with GC .311 please
I'm interested in getting a rifle mold for a couple of .308s I own. Is this a good boolit for the .308 if I order .311" diameter and GC? With a crimp groove like the one in the drawing, will a roll crimp be necessary?
Lefty SRH, have you slugged your bore/throat of the rifle you want to use it in? .311 should be fine but sometimes you have to size down or up to match your gun. Crimp groove was because the bullet was designed for use in AK and SKS in 7.62x39 which semi-auto's tend to try and shove the boolit back into the case when loading violently into the chamber - you don't have to crimp if your using a bolt action generally speaking.
Is this buy still open or is it closed?
Still on going - won't be closed until ready to hit the machine's per Swede's new business plan
Sorry,but can you take off my .311,but I want the .316 for my oversized 303
3 cavity please,no hp
Cheers
no34570
"I'll tell you what rule we applied sir,We applied rule 3-0-3, We caught them and we shot them, under rule 3-0-3." :Lt Harry " Breaker" Morant at his court martial in January 1902.
.314 5 cavity gas check with the hollow point option.
x2 please.
A 4 Cavity 2GC, 2PB in .316 drill for probe please
A 5 cavity, with 2 pb and 3 GC sized .311
Thank you
Crabo
Do not argue with idiots. They will drag you down to their level and beat you with experience.
Updated List
Bump
Thanks for the orders
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |