StainLess Steel MediaInline FabricationLee PrecisionTitan Reloading
Graf & SonsRotoMetals2MidSouth Shooters SupplyBallisti-Cast
Page 1 of 9 123456789 LastLast
Results 1 to 20 of 165

Thread: NOE 311, 314, 316 155Gr. FN

  1. #1
    Made in U.S.A.

    SwedeNelson's Avatar
    Join Date
    Mar 2005
    Location
    Provo, Utah
    Posts
    2,930

    NOE 311, 314, 316 155Gr. FN

    NOE 311, 314, 316 155Gr. FN
    Here is the link to the discussion thread:
    http://castboolits.gunloads.com/showthread.php?t=105570

    We will offer this bullet in .311", .314", .316" diameters.
    One size per block. (No mixing diameter)

    This buy is on the schedule.
    We will keep the buy open until 2 or 3 weeks before the date on the schedule.
    At that time we will close the buy and send out a PM with
    a request for payment. We don’t require payment before then.


    Prices will be as follows:
    Single cavity mould $68.00 Ea.
    Double cavity mould $72.00 Ea.
    Three cavity mould $79.00 Ea.
    Four cavity mould $85.00 Ea.
    Five cavity mould $92.00 Ea.
    Plus $10.00 Shipping/Handling.
    Foreign orders are a additional $10.00 Shipping/Handling.
    Prices are subject to change at any time.

    You can mix number of cavities in an order to make 5.
    We will offer PB and GC on this bullet.

    Use LEE Commercial 6-Cavity handles (not included).
    Lyman, RCBS type top punch furnished with each mould
    as well as a sample of Bull Plate sprue plate lube.
    Moulds are machined from 2024 Aluminum
    Used for high strength structural and aircraft applications.
    Tensile strength range 30,000 to 63,000 psi
    Sprue plate (blued), alignment pins, and hardware will be
    carbon steel.

    Hollow pointing one cavity and furnishing a double
    ended pin with pin holder would be $35.00 Extra

    We will accept Checks, Money Orders and Pay-Pal
    Pay-Pal requires a 3.5% sir-charge.
    Pay-Pal account:
    pbsco1@qwestoffice.net
    Make checks and money orders out to:
    NOE Bullet Moulds

    Our mailing address is:
    NOE Bullet Moulds
    1645 W 150 N
    Provo, Utah 84601
    801 377-7289


    Thank you for your interest in this buy.
    Swede Nelson
    Last edited by SwedeNelson; 01-22-2012 at 02:50 PM.
    The expectation of evil is more bitter than the suffering -OR-
    More people die from worrying about getting ate by a bear then get ate by a bear.

    Owner and CEO/CC&BW
    NOE Bullet Moulds
    You can check our schedule HERE



    Made in the U.S.A.
    Come and see us at:
    www.noebulletmoulds.com

  2. #2
    Made in U.S.A.

    SwedeNelson's Avatar
    Join Date
    Mar 2005
    Location
    Provo, Utah
    Posts
    2,930
    List of orders
    *1 rockrat 5 cavity GC .311
    2 blaser.306 5 cavity GC .311 drill for probe
    *3 Wayne S 5 cavity GC .311
    *4 Artful 5 cavity 3GC 2PB .314
    *5 miestro_jerry 4 cavity GC .314
    6 Dutch4122 5 cavity GC .316
    7 Dutch4122 5 cavity GC .314
    8 Dutch4122 2 cavity PB .311
    *9 Alchemist 3 cavity GC .311
    10 linotype 2 cavity GC .316
    *11 chboats 2 cavity GC .311
    *12 chboats 2 cavity GC .316
    13 Idaho Sharpshooter 5 cavity GC .314
    14 20nickels 5 cavity GC .314
    *15 gmsharps 3 cavity GC .314 drill for probe
    *16 no34570 3 cavity GC .316 drill for probe
    *17 ihmsakiwi 5 cavity GC .311 drill for probe
    *18 99unique 4 cavity GC .316
    19 ak_milsurp 2 cavity GC .314
    20 ak_milsurp 2 cavity GC .316
    21 micky_blue 4 cavity GC .314
    *22 Dschuttig 4 cavity GC .316
    *23 Springfield 4 cavity GC .311
    *24 Paulinski 3 cavity GC .311
    *25 dromia 4 cavity GC .311 drill for probe
    *26 dromia 4 cavity GC .316 drill for probe
    27 rays308 5 cavity GC .311
    *28 sleeper1428 4 cavity GC .314
    *29 A pause for the COZ 4 cavity 2GC 2PB .314
    *30 x101airborne 3 cavity GC w/HP .312 drill for probe
    *31 x101airborne 3 cavity GC w/HP .316 drill for probe
    *32 Nora 2 cavity GC .316
    *33 excess650 4 cavity GC .311
    *34 bodydoc447 5 cavity GC .311
    *35 bodydoc447 4 cavity GC .314
    36 greysage 5 cavity PB .311
    37 ckcadavona 5 cavity 4GC 1PB .314 drill for probe
    38 longshot 5 cavity GC .311
    *39 Coconino 4 cavity GC .311
    *40 Hamish 5 cavity 2GC 3PB .316
    41 Sagebrush7 4 cavity GC w/HP.311
    *42 highHook 4 cavity GC .316
    *43 highHook 5 cavity GC .311
    44 Dangerdude 5 cavity GC .314
    *45 Mr Peabody 2 cavity 2GC .316
    *46 15bobcat 2 cavity 1GC 1PB .314
    *47 Northerner 5 cavity GC w/HP .314
    *48 Northerner 5 cavity GC w/HP .314
    *49 Woodshot 4 cavity 2GC 2PB .316 drill for probe
    *50 crabo 5 cavity 5GC .311
    *51 crabo 5 cavity 5PB .311
    *52 Johnvid 5 cavity GC .311
    *53 rollmyown 2 cavity GC .311
    *54 Leonidas 4 cavity GC .311
    *55 schoolbus 5 cavity GC .311
    *56 SAJTU 3 cavity GC .314 drill for probe
    *57 CENTEX BILL 3 cavity GC .311
    *58 Mark85304 4 cavity GC .311
    59
    60
    61
    62
    63
    64
    65



    (*) = Paid


    Thanks
    Swede Nelson
    Last edited by SwedeNelson; 10-20-2012 at 02:52 PM.
    The expectation of evil is more bitter than the suffering -OR-
    More people die from worrying about getting ate by a bear then get ate by a bear.

    Owner and CEO/CC&BW
    NOE Bullet Moulds
    You can check our schedule HERE



    Made in the U.S.A.
    Come and see us at:
    www.noebulletmoulds.com

  3. #3
    Boolit Master

    rockrat's Avatar
    Join Date
    Aug 2005
    Posts
    2,437
    5 cav .311 gas check please

  4. #4
    Boolit Master blaser.306's Avatar
    Join Date
    May 2009
    Location
    Saskatoon Sask.
    Posts
    853
    I'm in ! .311 gas check 5 cavity ! drill for probe please .

  5. #5
    Boolit Master
    no34570's Avatar
    Join Date
    Apr 2005
    Location
    East Gippsland,Australia.
    Posts
    1,273
    I'll take a 3 cavity all GC +HP in .316 diameter please and drill for probe too,thanks
    Last edited by no34570; 10-17-2011 at 07:07 PM. Reason: punctuation
    Cheers

    no34570

    "I'll tell you what rule we applied sir,We applied rule 3-0-3, We caught them and we shot them, under rule 3-0-3." :Lt Harry " Breaker" Morant at his court martial in January 1902.

    "God,Gun's & Gut's made Australia free,let's fight to keep all three."

  6. #6
    Boolit Master Wayne S's Avatar
    Join Date
    Jan 2009
    Location
    Bagdad {no "H"} Fla
    Posts
    1,240
    5 cavity, .311 GC
    IHMSA # 566 "time sure flies when you're having FUN"

  7. #7
    Boolit Master


    Join Date
    Aug 2008
    Location
    CassCoMo
    Posts
    958
    I want a two cavity .314 Gas check

  8. #8
    Boolit Master Artful's Avatar
    Join Date
    Sep 2007
    Location
    Valley of the SUNs, AZ
    Posts
    8,059
    5 cavity .314 please - 3 GC -2 PB

  9. #9
    Boolit Master

    miestro_jerry's Avatar
    Join Date
    Dec 2007
    Location
    Far Eastern Ohio
    Posts
    567
    I want a 4 cavity GC mold, in .314, the money has been sent via PayPal.

    Thanks,

    Jerry
    Last edited by miestro_jerry; 10-18-2011 at 10:33 PM.
    Honor is a Way of Life

    NRA Benefactor Life Member

  10. #10
    Boolit Master
    Join Date
    Jan 2006
    Location
    SW Idaho
    Posts
    1,974
    Swede,

    I see your mention of an RG4 option. If this is true, pencil me in for one, .303-.314" and call me Mr Happy.

    thanks for all the fine work you are doing for us.

    Rich

  11. #11
    HONCHO EMERITUS


    Dutch4122's Avatar
    Join Date
    Mar 2005
    Location
    Mid-Eastern Michigan
    Posts
    1,742
    Assuming that the bore riding nose section of the .316" version will be .306" as mentioned in the discussion thread; then you can put me on the list for:

    .316" / 5 Cavity / all gas checked.

    Thanks for running this design with these options.
    -Matt

    CBA Member

    Results are all that matter, as long as we get there safely.

    Stay clear of "Mall Ninjas" at the range. Anybody who thinks they have to dress up like a SWAT Boogeyman just for a little informal target practice ain't the real deal.
    Group Buys Honcho'd: C326-175-FN, 434-210-RF, C434-210-RF, 30-165-SIL-MOD, 358156-PB, 413-170-Keith, C348-225-FN, 8mm SIL, 45-230-CM, 45-270-Ohaus/SWC

  12. #12
    Made in U.S.A.

    SwedeNelson's Avatar
    Join Date
    Mar 2005
    Location
    Provo, Utah
    Posts
    2,930
    Idaho Sharpshooter

    No RG moulds on this one, Sorry
    "Hollow pointing one cavity and furnishing a double
    ended pin with pin holder would be $35.00 Extra."

    Swede Nelson
    The expectation of evil is more bitter than the suffering -OR-
    More people die from worrying about getting ate by a bear then get ate by a bear.

    Owner and CEO/CC&BW
    NOE Bullet Moulds
    You can check our schedule HERE



    Made in the U.S.A.
    Come and see us at:
    www.noebulletmoulds.com

  13. #13
    Boolit Master

    Join Date
    Mar 2008
    Location
    Kentucky
    Posts
    548
    Swede,

    I'll take a 3 cavity .311 GC.
    "Great danger lies in the notion that we can reason with evil." Doug Patton


    Converting lead into gold

  14. #14
    Boolit Master Wayne S's Avatar
    Join Date
    Jan 2009
    Location
    Bagdad {no "H"} Fla
    Posts
    1,240
    I know there were more that 8 on my origional post that said they wanted one.

    How does everyone else feel about kicking in a few extra dollars to get this as a SGB on the schedule.
    I think it's and extra $ 10.00 for only 5 molds, so 8 of us it would be $ 6.25, and by the time this gets to the mill we should our 15 buyers and the $$ should go back to the origional price
    IHMSA # 566 "time sure flies when you're having FUN"

  15. #15
    Boolit Master Artful's Avatar
    Join Date
    Sep 2007
    Location
    Valley of the SUNs, AZ
    Posts
    8,059
    Wayne S, it's only been 4 days since new thread was created - give the missing guys a chance to find it - not all of have the same degree of addiction. ;^)

    And I see it's already scheduled for July so we have a while to get all on board.
    http://castboolits.gunloads.com/showthread.php?t=130122
    Last edited by Artful; 10-20-2011 at 05:30 PM.

  16. #16
    Boolit Master

    Join Date
    Mar 2008
    Location
    Kentucky
    Posts
    548
    Quote Originally Posted by Wayne S View Post
    I know there were more that 8 on my origional post that said they wanted one.

    How does everyone else feel about kicking in a few extra dollars to get this as a SGB on the schedule.
    I think it's and extra $ 10.00 for only 5 molds, so 8 of us it would be $ 6.25, and by the time this gets to the mill we should our 15 buyers and the $$ should go back to the origional price
    I just found this yesterday and posted to sign up. Swede hasn't updated the list to put me on it yet. More will come I'm sure..

    This is already on the schedule for July, would adding the SGB fee get it moved up? If so, I'd be willing. I can't see how it would make a difference to the schedule though...
    Last edited by Alchemist; 10-20-2011 at 07:55 PM.
    "Great danger lies in the notion that we can reason with evil." Doug Patton


    Converting lead into gold

  17. #17
    Boolit Master
    linotype's Avatar
    Join Date
    Feb 2011
    Location
    Central PA
    Posts
    320
    I will take a double cavity .316"/.306" GC
    "No free man shall ever be debarred the use of arms."
    --Thomas Jefferson

  18. #18
    Boolit Master

    Join Date
    Feb 2008
    Location
    Grover Beach, CA. just ahead of Pismo Beach
    Posts
    462
    After a reminding from Artful. put me down for a 2 cavity .311 and a 2 cavity .316, all GC

    Carl

  19. #19
    Boolit Master Wayne S's Avatar
    Join Date
    Jan 2009
    Location
    Bagdad {no "H"} Fla
    Posts
    1,240
    Quote Originally Posted by Alchemist View Post
    I just found this yesterday and posted to sign up. Swede hasn't updated the list to put me on it yet. More will come I'm sure..

    This is already on the schedule for July, would adding the SGB fee get it moved up? If so, I'd be willing. I can't see how it would make a difference to the schedule though...
    Since we are already on the schedule for July , no need for the SGB
    IHMSA # 566 "time sure flies when you're having FUN"

  20. #20
    Boolit Master
    Join Date
    Jan 2006
    Location
    SW Idaho
    Posts
    1,974
    5-cavity in .314". I just saw an ad in SGN for a 75 rd drum for an SKS. Looks like somebody made an adapter for the AK drum. I will need this mould to feed that bad dog...

    Rich

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check