I have a Saeco sizer. I'm new to this but wondering if someone could clarify for me: will Cramer sizing dies fit in a Saeco?
I have a Saeco sizer. I'm new to this but wondering if someone could clarify for me: will Cramer sizing dies fit in a Saeco?
If your SAECO holds the dies in with the screw on collar at the bottom, it looks like only those dies which have the threads will have any chance to work. The body diameters all match, most of the body lengths are within 0.020" or so, and the Cramer flanges all seem to be a smaller diameter, so they will at least sit in the die cavity properly. If you can find Cramer dies with the threads or a SAECO sizer with the little vertical set screw, you should be OK.
ALL THE SAECO TOP PUNCHES FIT CRAMERS...…I'V BEEN BUYING SAECO PUNCHES FOR OVER 30 YEARS and screwing them in my Cramer press...………..someone re-examine their statement that they are different!!!!!!!!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |