Four cavity GC drill for probe.
Four cavity GC drill for probe.
For fine firearms and shooting requisites visit my Web Site by clicking the link below:
Pukka Bundhooks
I'm in for a single cavity GC and 2,000 gas checks please.
Where are we for orders?
Rich
updated post #45
Last edited by Blammer; 11-27-2011 at 08:37 PM.
we are already on the production list as we only needed 5 to get this going.
Darrell, mine is drill for probe as well.
For fine firearms and shooting requisites visit my Web Site by clicking the link below:
Pukka Bundhooks
Is it possible to see a drawing of the 8mm version with dimensions? Thanks.
Blammer. I am going to have to back out of this one (#11). Found out my 8mm mauser isn't really an 8mm. It is more like a 30-06 with a .314 bore. I'm going to have to check it out some more. Shoot, already ordered a conversion set for my Dillon 550 and a set of loading dies. Sorry for the inconvenience.
This country has gone to hell but now there is hope for us.
hicard, no problem, thanks for the heads up.
Blammer, I just slugged the barrel on that mauser and found it is a .323-4 bore so could you please put me back on the list for the 4 cavity mold, 2 gc, 2 pb and drill for temp. probe. Please add 2000 gas checks to this order. Now I will have to shop around for loading dies.
Last edited by hicard; 11-13-2011 at 12:09 PM.
This country has gone to hell but now there is hope for us.
updated post #35
Last edited by Blammer; 11-20-2011 at 06:35 PM.
wonderful...
Rich
updated post #39
Last edited by Blammer; 11-23-2011 at 06:14 PM.
I would like a 3 cavity GC, 1 HP, DFP. +2000 GC
Is it hard to cast such a sharp point?
no it is not, I have a 30 cal version of this and it's amazingly easy.
updated post#45
Last edited by Blammer; 11-27-2011 at 08:37 PM.
Put me down for a 2 cavity, GC, plus a 1000 gas checks.
https://wbrpc.org/
genealogy, another area of interest
feedback - http://castboolits.gunloads.com/show...9613-czech_too
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |