I think I got this idea from someone here?? Used some brass from my scrap box to make this for 358s:
NRA Life
NMLRA Life
F&AM
I recentlystarted casting for my Mosin Nagant. I used a fire steel case and drilled a hole through the head and use a 1/4' bolt as a pusher.
Never thoughtof the sand paper on the outside.
On the 357 and 44 I shoot as cast, tumble lubed.
When I started with the Nagant I thought I'd try conventional lubes and a Lee .314 push through sizer. I have the sizes for a few other calibers. I haven't used the pistol ones yet and haven't started casting 7 mm yet.
If I get good results with the Nagant then I might try the 7mm's.
When I do I'll make kake cutters for them the same way.
Leo
Thanks to Ben for the OP and Minerat for the bump. This looks like something even I might be able to cobble together.
I use the old Lyman "Kake Cutter"s or the old Lee pan Lube/sizer kit.
I HATE auto-correct
Happiness is a Warm GUN & more ammo to shoot in it.
My Experience and My Opinion, are just that, Mine.
SASS #375 Life
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |