Hornady LNL powder measure fit Dillon press ?

[milprileb]

Two part question please.

1. Will the Hornady LNL powder measure with levers and powder thru die fit the Dillon 650 shell head and operate on the machine?

2. I cannot find the progressive LNL powder measure as packaged for progressive reloading ... cannot find that for sale at Grafs nor Midways. I only see the regular Hornady manual operated bench powder measure. Who sells the complete Hornady progressive powder measure with all parts so I can use it on my Dillon 650 ?

Thank you

[Waldog]

LNL powder measure works fine on Dillon presses. Vast improvement if you ask me!! I don't believe you can buy the powder measure and the powder die and linkage in one unit. You have to buy Powder measure and then buy the Powder Die/Linkage unit separately. See links below.

http://www.grafs.com/retail/catalog/...productId/5946
http://www.grafs.com/retail/catalog/...productId/5945

[Colorado4wheel]

You may want to add a PTX setup if your going to be wanting to flare at the same time like on the Dillon. The also have a upgrade that makes the flaring on the powder measure a little easier to manage.

[Waldog]

Good point Colorado4wheel! However, I strongly recommend this PTX:

http://www.powderfunnels.com/

Much easier to adjust and only need this one PTX for all cases from .30cal up to .50cal