MidSouth Shooters SupplyRotoMetals2Reloading EverythingLee Precision
Titan ReloadingWidenersLoad DataRepackbox
Inline Fabrication
Page 1 of 7 1234567 LastLast
Results 1 to 20 of 135

Thread: Rerun of NOE 315 115Gr. SWC

  1. #1
    Boolit Master
    NoZombies's Avatar
    Join Date
    May 2009
    Location
    N. Florida
    Posts
    2,493

    Rerun of NOE 315 115Gr. SWC

    Update 5/4/13: This buy will officially close 5/10/13 which will roughly co-incide with the molds being run. All orders must be placed by midnight EST 5/10/13 in order to be included in this buy!



    As discussed in This thread It seems that perhaps it would be a good idea to start a new thread requesting a Re-run of this bullet:



    Original thread for this bullet is found here

    Pricing info:

    prices will be as follows:
    Single cavity mould $68.00 Ea.
    Double cavity mould $72.00 Ea.
    Three cavity mould $79.00 Ea.
    Four cavity mould $85.00 Ea.
    Five cavity mould $92.00 Ea.

    RG2 Hollow point mould $96.00 Ea.
    Includes HP and FN pins
    RG4 Hollow point mould 126.00 Ea.
    Includes HP and FN pins
    Plus $10.00 per order (up to 3 moulds) Shipping/Handling.
    Prices are subject to change at any time.

    You can mix number of cavities in an order.
    We will offer gas check or plain base on this bullet.

    Use LEE Commercial 6-Cavity handles (not included).
    Lyman, RCBS type top punch furnished with each mould
    as well as a sample of Bull Plate sprue plate lube.
    Moulds are machined from 2024 Aluminum
    Used for high strength structural and aircraft applications.
    Tensile strength range 30,000 to 63,000 psi
    Sprue plate (blued), alignment pins, and hardware will be
    carbon steel.

    Hollow pointing one cavity and furnishing a double
    ended pin would be $35.00 Extra.

    We will accept Checks, Money Orders and Pay-Pal
    Pay-Pal requires a 3% sir-charge.

    Our mailing address is:
    Night Owl Enterprises
    1645 W 150 N
    Provo, Utah 84601
    801 377-7289


    Interest list:

    1. NoZombies........ RG4 PB
    2. GunDownUnder...4 Cavity PB (shipping to AUS)
    3. Castblast...........5 Cavity GC drilled for probe
    4. Nueces..............5 Cavity PB
    5. Nueces..............RG2 GC
    6. Landric.............3 Cavity PB
    7. Landric.............3 Cavity PB
    8. Rusty W.......... 3 Cavity, 2PB 1GC
    9. RedneckDan....RG4 2GC 2PB
    10. Contender1.....3 Cavity PB +1HP
    11. ddixie884........5 Cavity PB
    12. monadnock#5..4 Cavity GC
    13. shootingbuff.....RG4 2GC 2PB
    14. Buffalo Hunter...5 cavity PB
    15. Daschnoz.........RG2 GC
    16. OuchHot!.........4 Cavity PB
    17. starreloader......5 Cavity PB
    18. starreloader......5 Cavity PB
    19. JBaisch............4 Cavity GC
    20. R Flux.............4 Cavity PB
    21. Norseman .......5 Cavity PB (shipping to Norway)
    22. MTtimberline....5 Cavity PB
    23. Fishman .........5 Cavity 3PB 2GC
    24. frankenfab........4 Cavity GC Drill for Probe
    25. frankenfab........4 Cavity PB Grill for Probe
    26. gundownunder. 4 Cavity PB
    27. jaydub in wi......4 Cavity PB
    28. Bodydoc447.......RG2 PB
    29. Sgt. Mike...........RG2 PB
    30. Slug .................5 Cavity PB
    31. fluxion ..............5 Cavity PB
    32. LDMCROOK .......5 Cavity PB
    33. jj850 ................5 Cavity PB
    34. Deadwood Dan ..RG4 2GC 2PB
    35. Crash87 ...........4 Cavity PB
    36. 101VooDoo ......4 Cavity 3PB 1GC Drill for Probe
    37. NoZombies .......5 Cavity PB
    38. Dschuttig ..........RG4 PB
    39. Visible Miss ......4 Cavity PB
    40. jrayborn ...........5 Cavity PB
    41. mustanggt .......4 Cavity PB
    Last edited by NoZombies; 05-08-2013 at 02:25 PM.
    Nozombies.com Practical Zombie Survival

    Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!

  2. #2
    Boolit Buddy gundownunder's Avatar
    Join Date
    Dec 2006
    Posts
    254
    I'd be in for a 4 cavity PB, in either brass or aluminium.
    Hard work made me what I am today,
    Broken and broke
    ******************************
    Bob

  3. #3
    Boolit Junkie
    castblast's Avatar
    Join Date
    Jul 2009
    Location
    Virginia
    Posts
    108
    I'm in for a 5 cav gc drilled for temp probe.

  4. #4
    Boolit Master


    Nueces's Avatar
    Join Date
    Dec 2006
    Location
    Texas Hill Country
    Posts
    2,239
    I'd go for a 5-cavity plain base and an RG2 gas checked.

    Mark

  5. #5
    Boolit Master
    NoZombies's Avatar
    Join Date
    May 2009
    Location
    N. Florida
    Posts
    2,493
    -------------
    Last edited by NoZombies; 10-19-2012 at 09:52 AM.
    Nozombies.com Practical Zombie Survival

    Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!

  6. #6
    Boolit Master
    NoZombies's Avatar
    Join Date
    May 2009
    Location
    N. Florida
    Posts
    2,493
    -----------
    Last edited by NoZombies; 10-19-2012 at 09:52 AM.
    Nozombies.com Practical Zombie Survival

    Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!

  7. #7
    Boolit Master
    NoZombies's Avatar
    Join Date
    May 2009
    Location
    N. Florida
    Posts
    2,493
    Updated first post
    Nozombies.com Practical Zombie Survival

    Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!

  8. #8
    Boolit Master


    Join Date
    Jan 2007
    Location
    Highland, Arkansas
    Posts
    1,543
    Put me down for a 5C PB

  9. #9
    Boolit Master Landric's Avatar
    Join Date
    Mar 2009
    Location
    North Carolina
    Posts
    605
    OK, I'm in this time around for a 5 Cavity 5PB. Thanks!
    "The Engine could still smile...it seemed to scare them" -Felix

    Landric

    Honcho for NOE .38-200 Mk. I British Round Nose Group Buy

  10. #10
    Boolit Buddy Rusty W's Avatar
    Join Date
    Jan 2008
    Location
    Muldrow Oklahoma
    Posts
    145
    I'm in for a 3 cavity if I can get a GC snuggled in between 2 PB.
    Thanks,
    Rusty

  11. #11
    Boolit Master
    NoZombies's Avatar
    Join Date
    May 2009
    Location
    N. Florida
    Posts
    2,493
    Rusty, I don't think it will be between the other cavities, but we can get you a mold with 2 PB an one GC for sure.
    Nozombies.com Practical Zombie Survival

    Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!

  12. #12
    Boolit Master
    redneckdan's Avatar
    Join Date
    Oct 2005
    Location
    Some where on the Iron Range
    Posts
    2,106
    in for an RG 4 2 GC 2 Plain
    Some where between here and there.....

  13. #13
    Boolit Buddy Rusty W's Avatar
    Join Date
    Jan 2008
    Location
    Muldrow Oklahoma
    Posts
    145
    I'm still in for a 3 cavity, 2PB, 1GC. I was just wanting to test an idea I got from using the RG4 313640.

  14. #14
    Boolit Master
    NoZombies's Avatar
    Join Date
    May 2009
    Location
    N. Florida
    Posts
    2,493
    Quote Originally Posted by Rusty W View Post
    I'm still in for a 3 cavity, 2PB, 1GC. I was just wanting to test an idea I got from using the RG4 313640.
    When it comes time for the run, I'll ask him if it's possible, for now, you're on the list for a 2PB 1 GC
    Nozombies.com Practical Zombie Survival

    Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!

  15. #15
    HONCHO EMERITUS


    Dutch4122's Avatar
    Join Date
    Mar 2005
    Location
    ??????
    Posts
    1,754
    Ok, can't pass this one up a second time. Put me down for a 5 cavity, all plain based.

    Thanks!
    -Matt
    Group Buys Honcho'd: C326-175-FN, 434-210-RF, C434-210-RF, 30-165-SIL-MOD, 358156-PB, 413-170-Keith, C348-225-FN, 8mm SIL, 45-230-CM, 45-270-Ohaus/SWC, Edd's 28-170-FN

  16. #16
    Boolit Buddy gundownunder's Avatar
    Join Date
    Dec 2006
    Posts
    254
    Hey NoZombies
    looks like 5 cavity is the preferred option, if my 4 cavity turns out to be an oddball I'm happy to upgrade to a 5 to keep things simple

    I assume you will let us know when to start sending in the cheques, and I will also need to know how much extra to include for shipping to Australia.
    Hard work made me what I am today,
    Broken and broke
    ******************************
    Bob

  17. #17
    Boolit Master
    NoZombies's Avatar
    Join Date
    May 2009
    Location
    N. Florida
    Posts
    2,493
    Quote Originally Posted by gundownunder View Post
    Hey NoZombies
    looks like 5 cavity is the preferred option, if my 4 cavity turns out to be an oddball I'm happy to upgrade to a 5 to keep things simple

    I assume you will let us know when to start sending in the cheques, and I will also need to know how much extra to include for shipping to Australia.
    I think the way NOE sets these up, a running a 4 cavity vs 5 should be no problem, but I always like having an extra bullet drop for the same amount of time and work, and not much more purchase money It's your call though, I'll leave you marked for 4 unless you say otherwise.

    I believe Al Nelson (Swede Nelson on the forum) will make contact when it's time to send in money for the buy. I'm sure he'll also be able to quote you shipping down under. I'll make a note by your details that it's going down there, just to be sure he see's it.
    Nozombies.com Practical Zombie Survival

    Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!

  18. #18
    Boolit Master Landric's Avatar
    Join Date
    Mar 2009
    Location
    North Carolina
    Posts
    605
    Can you put me down for a 3 cavity 3PB in addition to the 5 Cavity 5PB above?

    Also, BUMP!!!
    "The Engine could still smile...it seemed to scare them" -Felix

    Landric

    Honcho for NOE .38-200 Mk. I British Round Nose Group Buy

  19. #19
    Boolit Master


    Join Date
    Jan 2007
    Location
    Highland, Arkansas
    Posts
    1,543
    Sorry for the runaround. Please change mine to all gas checks.

  20. #20
    Boolit Master
    NoZombies's Avatar
    Join Date
    May 2009
    Location
    N. Florida
    Posts
    2,493
    No problem guys, List updated, and PM sent for clarification.

    I'm really looking forward to this mold!
    Nozombies.com Practical Zombie Survival

    Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!

Page 1 of 7 1234567 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check