SGB for 434 short nose RF

[Blammer]

I will be running the GB and we well be using Night Owl Enterprise (NOE) to make the moulds.

A minimum of 5 orders for moulds is required to waive the tooling cost and be placed on the production schedule. This is a small group buy based on a 454 255gr RF that NOE has already produced.

I HAVE BEEN INFORMED THAT WE CAN ALSO RUN A .432 DIA OF THIS DESIGN. You will get a .434 dia if you do not specify you want .432.

Post your order on this thread. I will keep the post below this updated with the orders. When the 5th order has been placed (doesn't have to be paid for) we will then be put on NOE's production schedule.

You may order any number of cavities available. You will just need to pay the appropriate price.

1 cavity moulds are $68 ea.
2 cavity moulds are $72 ea.
3 cavity moulds are $79 ea.
4 cavity moulds are $85 ea.
5 cavity moulds are $92 ea.

The hollow point option for one cavity will be the standard $35.
Blank Hollow point pins will be an extra $1.50 each.

RG2 $96
RG4 $126
Set of extra BLANK pins for the RG2 $4
Set of extra BLANK pins for the RG4 $8

Plain base and GC options are available.
You may mix and match PB and GC in the same mould.
Shipping to you with insurance will be $10

A Lyman, RCBS type top punch is included along with a sample of Bull Plate sprue lube.

I'm the honcho

Darrell Steenwyk
112 Old Lime Kiln Rd
Arden, NC 28704

What you must do:
Send me a letter with your handle, your shipping address, what you ordered, and the money. (check or MO is fine)

The buy will remain open until one month prior to production. ONE MONTH PRIOR TO PRODUCTION I WILL CALL FOR PAYMENT. You do not need to pay prior to this, but you can if you want.
When I call for payment I will need all payments in within the week or you will miss out.

For those out of country please PM me for details on payment options and shipping costs.

NOE will ship them all to me and I’ll test cast with a few of them and then if all is well, send out the moulds.

Here is a link to the production schedule.

http://castboolits.gunloads.com/showthread.php?t=142415

Here are the pics with dimensions

[Blammer]

Who wants WHAT.
All are GC unless otherwise specified.

Shipped 2/20/14
.434 dia
1C

GLL 1C GC+HP+3 extra BLANK pins: drill for probe PAIDShipped 2/10/14

2C
lonegun1894 2C PBPAIDShipped 2/10/14
womblurp RG2 GCPAIDShipped 2/20/14
womblurp RG2 PB PAIDShipped 2/20/14
ramhunter 2C PBPAIDShipped 2/19/14
sffar RG2 PB
anthonyB 2C PBPAIDShipped 2/10/14
Missoulaz28 RG2 GC
buckwheatpaul RG2 GC PAIDShipped 2/10/14
greyarea 2C 1PB 1GCPAIDShipped 2/10/14
squarebutte RG2 PB set of blank HP pinsPAIDShipped 2/10/14

phaessler 2C GC PAIDShipped 2/10/14

3C


4C
GLL 4C 2PB 2GC + drill for probe .434PAIDShipped 2/10/14
Tcfan RG4 GC + one set of BLANK pinsPAIDShipped 2/10/14
x101airborne RG4 2PB 2GC; drill for probe PAIDShipped 2/10/14
cattleman RG4 2PB 2GC + 2extra sets of BLANK pins; drill for probePAIDShipped 2/10/14
leather2 RG4 PBPAIDMoney refunded per request.
tygar RG4 2GC 2PB PAIDShipped 2/10/14



5C
smelkid 5C PBPAIDPP1/18/14Shipped 2/19/14


.432 diaNEW OPTION! YOU MAY CHANGE IF YOU WANT JUST POST BELOW

1C


2C

Atlaw 2C PB
Blammer RG2 2GC; drill for probePAIDShipped 2/10/14

3C

4C

mr peabody 4C PBPAIDShipped 2/10/14
olevern 4C PBPAIDShipped 2/10/14
stick man 4C PB LOCAL pickup
HighHook RG4 GC
citizenal RG4 GC; drill for probe
valorsminion RG2 GC + set of blank pins PAIDShipped 2/10/14
poohgyrr 4C GCPAIDShipped 2/10/14

5C

citizenal 5C GC; drill for probe

[GLL]

Blammer:

I will take a 0.434" 1-cavity GC + HP + 3 extra blank pins.

Jerry

[Blammer]

if we get enough interest maybe we can run anther buy at the same time for a .432 dia?

[tonyjones]

Blammer,

I'll take a RG2 with 2 extra sets of pins, drill for probe. Is $8 for an extra set of pins the price for extra pins for a RG4?

Thanks,

Tony

[Blammer]

tonyjones, I edited it, thanks for the catch!

RG2 extra pins $4
RG4 extra pins $8

[TCFAN]

Blammer

I have a question..If this buy were to go in today what is your best guess on when the money would be called for..Just trying to juggle funds... I want in on this buy just have to figure out the money side.............Terry

[Blammer]

probably at least 8 months.
set aside $10 a month and you're set!

[GLL]

Blammer:

Please ask Al to drill my mold for the temp probe as well !

Jerry

[Blammer]

GLL, done, thanks

[TCFAN]

I want 2 molds

#1 a 5 cav. plain base

#2 a RG2 gas check with 2 sets of extra pins.

Please PM with total................Terry

Man I need to stay out of this group buy section..

[Blammer]

list updated, we need one more to get on the schedule

[Dutch4122]

I'll take the #5 slot.

5 cavity / .434" diameter / gas checked / solid nose.

Thanks for running this Blammer!

[Blammer]

updated post #16

[TCFAN]

Bump to the top.... ....I think this boolit will work great in my Marlin 94 Cowboy 44mag at 44-40 velocity.

[Blammer]

updated post #22

[Blammer]

(long sigh...................)

I may as well get one too.....

[Blammer]

list updated.

[no34570]

Blammer
I'll take a RG 2 all Gc please,drill for probe please.
Postage to Australia and paypal,

[no34570]

Man I need to stay out of this group buy section..

Yep,you and me both mate,it gets expensive,but I don't wanna miss out