I have a 10/22 with a new barrel but i would like to get a 17 hmr barrel for the gun.Any one know whare i can get a cheep barrel in 17 hmr for the 10/22
Thanks for all the help
I have a 10/22 with a new barrel but i would like to get a 17 hmr barrel for the gun.Any one know whare i can get a cheep barrel in 17 hmr for the 10/22
Thanks for all the help
Not sure if you can find one. I see Volquartsen took theirs off the website. And then there's the whole recall thing.
If you're gonna be dumb, you gotta be tough.
SASS 17373
Proud Dad of a USAF Airman
thats not good i love it as a 22 but thot it would be cool in the 17
You will need to do something with the breach block, as is the base of the cartridge will bulge out. It is common to drill holes in the block and fill with lead solder. Blocks are hard so drill with carbide endmill. The lead deadens the bolt so it is a little slower moving, sort of a dead blow hammer effect.
You can get a barrel form Green Mountain http://www.gmriflebarrel.com/product...aspx?id=901673
McGowen may also have the barrel http://www.mcgowenbarrel.com/
I guess your talking about a 10-22 mag. I don't think the 22 longrifle version will not accept a 17HMR length cartridge or magazine. I had a 17 Mach 2 barrel for my 10-22 and liked it very well. It pushed a 17 grain bullet to 2100 FPS and would shoot 1 1/2" groups all day long at 100 yards. But the ammo was expensive and so I sold it.
Wayne
Aim low boys, there ridin shetlands
thanks for all the info
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |