Titan ReloadingRotoMetals2Lee PrecisionStainLess Steel Media
Inline FabricationGraf & SonsADvertise here

Page 3 of 3 FirstFirst 123
Results 41 to 55 of 55

Thread: Ruger No 1 in 303 British?

  1. #41
    Boolit Master rollmyown's Avatar
    Join Date
    Feb 2010
    Posts
    930
    Keep us posted FF, we want to see a tight bore. small groups and a big grin.

  2. #42
    Boolit Master Four Fingers of Death's Avatar
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    6,559
    A bit of an update, I was speaking to my friend at the range on Sunday and he said that his 303 No1 (the one I mentioned earlier) delivers the first shot exactly where you aim it and the next one within an inch of that and the third shot starts to string (which he thinks may be bedding anyway). He doesn't cast, but found that the Hornady 174Gn RN the best performing bullet in his rifle. He is a deer stalker who hunts the timbered areas mostly and usually stalks within a hundred yards or less, so the rifle is plenty accurate for his needs and has accounted for a lot of game.

    I have been slack and haven't got around to slugging mine or even reloading for it yet (silly old fart buying too many rifles at once, can't get to them all).

    Watch this space, lol.
    "I'll help you down the trail and proud to!" Rooster Cogburn.

    "Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."

    SASS Life Member No 82047

    http://s89.photobucket.com/albums/k228/4fingermick/

    Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
    Sniper to Psycholigist; 'Recoil Ma'am.'

    From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."

  3. #43
    Boolit Master Four Fingers of Death's Avatar
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    6,559
    I slugged the bore today, maximum dimension of the slug was 0.313" I was not able to get other dimensions. It will be fine with cast, but may be iffy with jacketed. I can't imagine why Ruger turned out a hammer forged barrel over the desired 303/311 measurements.
    "I'll help you down the trail and proud to!" Rooster Cogburn.

    "Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."

    SASS Life Member No 82047

    http://s89.photobucket.com/albums/k228/4fingermick/

    Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
    Sniper to Psycholigist; 'Recoil Ma'am.'

    From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."

  4. #44
    Boolit Master
    Join Date
    Jan 2007
    Location
    Upstate, SC
    Posts
    370
    They made it the dimensions they did because it has to meet CIP/SAAMI spec...

    Have a look for yourself... http://www.saami.org/pubresources/cc...%20British.pdf

  5. #45
    Boolit Master Four Fingers of Death's Avatar
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    6,559
    My bad, I thought that it was 0.303" / 0.311" so it should be ok.
    "I'll help you down the trail and proud to!" Rooster Cogburn.

    "Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."

    SASS Life Member No 82047

    http://s89.photobucket.com/albums/k228/4fingermick/

    Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
    Sniper to Psycholigist; 'Recoil Ma'am.'

    From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."

  6. #46
    Boolit Master Idaho Mule's Avatar
    Join Date
    Jun 2012
    Location
    Viola, Idaho
    Posts
    863
    Mine measures .303 by .313 as well. JW

  7. #47
    Boolit Master Four Fingers of Death's Avatar
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    6,559
    I'd best be opening that Lee sizing die to 0.314".
    "I'll help you down the trail and proud to!" Rooster Cogburn.

    "Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."

    SASS Life Member No 82047

    http://s89.photobucket.com/albums/k228/4fingermick/

    Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
    Sniper to Psycholigist; 'Recoil Ma'am.'

    From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."

  8. #48
    Boolit Master swamp's Avatar
    Join Date
    Mar 2010
    Location
    Denver, CO
    Posts
    643
    I have a #1 in 303. So far I have not done much load developement with it. Just some fun plinking. Have been using a 235gr. cast plain base and so far it seems very good. Got the mould from a member. oversize 300 blackout mould. Need to put on a scope and see just how accurate it is.
    swamp
    There is no problem so great, that it cannot be solved by the proper application of high explosives.

  9. #49
    Boolit Master Four Fingers of Death's Avatar
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    6,559
    My mate is using a Lee Black Bart or whatever you call it mould. I must ask him what they drop at.
    "I'll help you down the trail and proud to!" Rooster Cogburn.

    "Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."

    SASS Life Member No 82047

    http://s89.photobucket.com/albums/k228/4fingermick/

    Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
    Sniper to Psycholigist; 'Recoil Ma'am.'

    From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."

  10. #50
    Boolit Master Four Fingers of Death's Avatar
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    6,559
    I have been liberating brass from factory loads (I had a big credit at a shop some years ago, my mate worked there and I walked in the day before they were going to close and my mate that worked there tipped me off. He said I'd get my money, but it would take months by the time the lawyers worked things out and he suggested that I take the credit in goods. I didn't fancy anything on the shelves and then the Remington Rep walked in. I ended up with a 7600 Police Patrol 308Win and 120 rounds each of Remington 308Win, 303Brit, 30-06, 300WM, 338WM). The 303Brits are just about gone and I loaded some 150Gn Privi Partisan bullets today. The cast boolits will be following shortly.
    "I'll help you down the trail and proud to!" Rooster Cogburn.

    "Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."

    SASS Life Member No 82047

    http://s89.photobucket.com/albums/k228/4fingermick/

    Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
    Sniper to Psycholigist; 'Recoil Ma'am.'

    From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."

  11. #51
    Boolit Master Four Fingers of Death's Avatar
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    6,559
    Well........, I was running the rifle range today and the Club Armourer (also a gun dealer catering to the members under our system) appeared on the scene. We were chatting and we were joined by th e other guy who has a No1 in 303. The Armourer mentioned that he had been trying to sell a 303Brit No1 which was part of the original order. The previous range captain, now deceased ordered and paid for it and died of a heart attack a week later. The rifle was forgotten until it turned up more tan a year later. I made an offer which was half of the new price (and only $100 below what he had been trying to sell it at for two years. So I am now the proud owner of two 303Brit No1s. One scoped and one with peep sights perhaps?
    "I'll help you down the trail and proud to!" Rooster Cogburn.

    "Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."

    SASS Life Member No 82047

    http://s89.photobucket.com/albums/k228/4fingermick/

    Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
    Sniper to Psycholigist; 'Recoil Ma'am.'

    From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."

  12. #52
    Boolit Master rollmyown's Avatar
    Join Date
    Feb 2010
    Posts
    930
    FF, I thought I had issues!


    I've still not fired mine and I've had it for almost 2 years. I did check it and clean it today, I hope to shoot it soon (with cast)

    A new England or Skinner peep sounds like the business on this fast pointing single shot.

  13. #53
    Boolit Master Four Fingers of Death's Avatar
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    6,559
    Saved from myself. I have missed out on the second 303, a last minute bid came in, way higher than mine and I stepped down to make sure the widow got the most out of the sale. So back to the original 303, haha.
    "I'll help you down the trail and proud to!" Rooster Cogburn.

    "Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."

    SASS Life Member No 82047

    http://s89.photobucket.com/albums/k228/4fingermick/

    Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
    Sniper to Psycholigist; 'Recoil Ma'am.'

    From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."

  14. #54
    Boolit Master Four Fingers of Death's Avatar
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    6,559
    Quote Originally Posted by rollmyown View Post
    What? Arguably one of the best bolt action battle rifles ever designed, and it's got problems with rain?
    Fussy Target shooters I reckon. I carried a SMLE as a cadet and one two week camp it rained continually and we carried our rifles everywhere. We had a range shoot towards the end of the camp and with twenty or so teenagers blasting away, It looked like an outdoor sauna.

    Our diggers didn't seem to have any problems in the jungles of New Guinea and the Brits didn't have much trouble in rainy old Europe. The weather for WW2 was pretty much the worst for the century.
    "I'll help you down the trail and proud to!" Rooster Cogburn.

    "Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."

    SASS Life Member No 82047

    http://s89.photobucket.com/albums/k228/4fingermick/

    Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
    Sniper to Psycholigist; 'Recoil Ma'am.'

    From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."

  15. #55
    Boolit Master Four Fingers of Death's Avatar
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    6,559
    I loaded up some PPU / Highland 150Gn soft points using AR2208 (Varget in the States) today and got terrible results at the range. I moved back to 50 yards and one of the loads I was working up went 1.5" for three shots, the rest were at least 2-3" back to the drawing board.
    "I'll help you down the trail and proud to!" Rooster Cogburn.

    "Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."

    SASS Life Member No 82047

    http://s89.photobucket.com/albums/k228/4fingermick/

    Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
    Sniper to Psycholigist; 'Recoil Ma'am.'

    From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check