NOE .40 S&W/10mm 160/180 Round Nose Group Buy

[Landric]

***THIS BUY IS NOW CLOSED. THANKS FOLKS!***

This buy will be for the NOE 160 / 180 Grain .40 S&W/10mm Round Nose. This buy is on the schedule for April 2012.

NOE is willing to offer a choice between 160 and 180 grain boolits on this buy. Only one weight per block, so no mixed 160/180 cavities, but there will be a choice of 160 or 180 grain boolits for each mould. There will also be a bevel base option for the 180 grain boolit, but it will weigh about 190 grains with the BB, still 180 grains as the PB. RG moulds will only be available with the 160 grain weight.

Here are the pics of the design:

190 Grain Bevel Base



180 Grain Plain Base



160 Grain Plain Base




160(150) Grain Plain Base HP



Loaded .40 S&W Cartridge




Loaded 10mm Cartridge




The hollow point version of the 180 grain would be the same as the 160 grain, just slightly longer, and probably around 170 grains. When posting, please let me know which weight you want. We can mix and match weights to get the required 15 orders, we just can't mix and match weights in moulds.

PLEASE NOTE, NOE HAS DETERMINED THAT THE RG MOULDS WILL ONLY BE AVAILABLE IN THE 160/150 WEIGHT DUE TO THE DIFFERENCE IN PINS REQUIRED FOR THE HEAVIER WEIGHT BOOLIT IN RG FORMAT. THE 180 GRAIN BOOLIT WILL ONLY BE AVAILABLE IN STANDARD FORMAT, BUT THOSE MOULDS MAY BE HOLLOWPOINTED FOR THE EXTRA $35/CAVITY COST. SORRY FOR THE CONFUSION. ANYONE WHO IS LISTED FOR A RG MOULD IN THE 180 WEIGHT, PLEASE LET ME KNOW WHAT YOU WOULD LIKE TO DO, SINCE THE RG ISN'T AVAILABLE IN THAT WEIGHT. THANKS.

List of those interested:

SHIPPING COMPLETED, THANKS EVERYONE!

*1)Landric 3 Cavity 3PB 160 Grain In my hot little hands
*2)btreanor 5 Cavity 5PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7444
*3)starreloader 5 Cavity 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6973
*4)starreloader 5 Cavity 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6973
*5)Paulinski 3 Cavity 3PB 180 Grain Shipped, Canada, no delivery confirmation number available
*6)sargenv 4 Cavity 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7468
*7)Lloyd Smale RG4 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6805
*8)coaldust 4 Cavity 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7437
*9)Jeff_WNY 4 Cavity 4PB 180 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6768
*10)shawnsmc RG4 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6775
*11)Groo 2 Cavity 2PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6799
*12)Lizard333 3 Cavity 3PB w/ HP 180 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 6583
*13)mold maker RG4 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7147
*14)allie 5 Cavity 5PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6812
*15)Beau Cassidy RG4 4PB 160 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8846
*16)1dbbehr 3 Cavity 3PB w/ HP 180 Grain USPS Delivery Confirmation # 0311 3260 0001 3895 0271
*17)sandermar 4 Cavity 4PB 180 Grain Shipped, Canada, no delivery confirmation number available
*18)SMCCORD 5 Cavity 5PB 160 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8952
*19)Idaho Sharpshooter RG4 4PB 160 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8969
*20)h1tdk00 RG4 4PB 160 Grain -1 SET BLANK PINS USPS Delivery Confirmation # 0310 0480 0002 7560 8976
*21)Iron Mike Golf RG4 4PB 160 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8860
*22)boltons75 RG4 4PB 160 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8877
*23)citizenal 5 Cavity 5PB 160 Grain -DRILL FOR PROBE USPS Delivery Confirmation # 0310 0480 0002 7560 8884
*24)citizenal 5 Cavity 5PB 180 Grain -DRILL FOR PROBE USPS Delivery Confirmation # 0310 0480 0002 7560 8884
*25)Redwoode RG4 4PB 160 Grain -DRILL FOR PROBE USPS Delivery Confirmation # 0310 0480 0002 7560 8891
*26)Blov 5 Cavity 5PB 160 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8907
*27)Kobuk 4 Cavity 4PB 180 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8914
*28)soaringf22 5 Cavity 5PB 180 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8921
*29)tcart RG2 2PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7383
*30)joeatact RG2 2PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7390
*31)alamogunr 4 Cavity 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7406
*32)1845greyhounds 4 Cavity 4PB 160 Grain -DRILL FOR PROBE USPS Delivery Confirmation # 0311 0240 0002 4257 7413
*33)ShootNSteel 5 Cavity 5PB 180 Grain, 1 Cavity HP'd USPS Delivery Confirmation # 0311 0240 0002 4257 7420
*34)HighHook RG4 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7369
*35)Cmemiss RG4 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7451


*= PAID ORDER

Standard Molds
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Hollow pointing one cavity and furnishing a double ended pin would be $35.00 extra.
If you want to fashion different HP profiles, an extra blank pin would be $1.50

RG Aluminum Molds
Two cavity RG2 HP mould $96.00 Ea.
Includes one set of hollow point pins
and one set of flat nose pins.
If you want to fashion different HP profiles for the RG2 an extra blank pin set of two (2) would be $4.

Four cavity RG4 HP mould $126.00 Ea.
Includes one set of hollow point pins
and one set of flat nose pins.
If you want to fashion different HP profiles for the RG4 an extra blank pin set of four (4) would be $8.

Shipping and handling will be $10 per order (1 or 2 moulds) and shipped priority mail. If you live outside the United States contact me, and I will work with you, US Priority Mail International will be about $20 US. There will be a $4.50 charge (per mould) for payment via PayPal to cover PayPal fees.

[Jeff_WNY]

Please put me down for:

1 Four cavity mould Standard 180 Grain PB. Thanks.

[shawnsmc]

You can put me down for a RG4.
Thanks,
Shawn

[Landric]

You can put me down for a RG4.
Thanks,
Shawn

Will do, which weight would you like?

[shawnsmc]

Will do, which weight would you like?

Sorry I assumed the RG's were only 150's. I guess I will go with the 150 grain.

Thanks

[shaggyant]

put me down for a five cavity round nose 180gn mold please.
P.S. is there a gas checked version of this available?

[Landric]

No, no gas check on this one.

[shaggyant]

Ok, I have been looking at the drawing and I need to get this to load at 1.260" OAL in my 10mm. Since my brass is .991" long it looks like I will be into the ogive of the bullet by about ten thousandths.
I am not sure if this will pose a problem?Is there something I am overlooking on this?

[shawnsmc]

Ok, I have been looking at the drawing and I need to get this to load at 1.260" OAL in my 10mm. Since my brass is .991" long it looks like I will be into the ogive of the bullet by about ten thousandths.
I am not sure if this will pose a problem?Is there something I am overlooking on this?

Use the RG version. The hollow point should put you right where you want.

[shaggyant]

Use the RG version. The hollow point should put you right where you want.

It's ok, I want the extra bullet weight. I'll stay with the round nose and just seat them as close to SAAMI spec as I can get. There ought to be room in my Glock and 1911 mags for the difference in length.

[sargenv]

Seems we are getting close to the minimum order.. cool.. If I didn't already have a 185 ish RN I'd go for the heavier weight also.. I didn't even realize that it had gone into Group buy mode..

[Landric]

We just need one more to get on the production schedule. Hopefully someone will speak up soon.

[Landric]

We are at 15, so I'll contact NOE and see about getting us on the schedule. Bump for interest.

[Groo]

Ok, I have been looking at the drawing and I need to get this to load at 1.260" OAL in my 10mm. Since my brass is .991" long it looks like I will be into the ogive of the bullet by about ten thousandths.
I am not sure if this will pose a problem?Is there something I am overlooking on this?

Groo here
Looks like the nose will need to be shortened to work in a 10mm..
Lets get this checked before production or this will be a 40S&W only bullet..
I want it for 10 mm...
Max case length .992 in Speer Trim to .982 Max cart length 1.260 [many load 1.250]
PS. Double stack mags [like glock] can take longer shells but the 1911 is shorter in the mag,
a 38 super is max at 1.28 with a smaller round nose.

[thegreatdane]

I also plan to use this for 10mm (and .40). Glad you caught that one shaggy. I'd prefer not to be seated below the ogive.

Keep us posted.

[Lizard333]

Three cavity PB 180 gn

[sargenv]

Wife just got a permanent job, so with that, I'm going to add in a 4 cav PB 180 also.. Never can have too many molds

[Mauser Rat]

We're on the NOE schedule for January if any of you had not already checked! Thanks Landric and Al!

[harley45]

So did we decide if this will work in a 10mm?

[Mauser Rat]

Landric,

I'd like to ADD a 3 cav 3 PB 180 grain RN to the 3 cav 3 PB 160

Both drilled for probe please

Thanks,

Kevin