I just got some lead square rods from a friend... It says I.S.C. 2.625. I'm thinking it's 2 and 1/4 ounce rod.... but is it lead? Also taracorp was written on others. It's melted down so no futher info can be given.
I just got some lead square rods from a friend... It says I.S.C. 2.625. I'm thinking it's 2 and 1/4 ounce rod.... but is it lead? Also taracorp was written on others. It's melted down so no futher info can be given.
If you mean Terracorp, then it could be their Magnum Alloy. If so, then composition would be 2/6/92 (Sn/Sb/Pb) and it was made for bullet casting.
"The alloy was a joint development effort by Terracorp and Magma. The goal was to develop an economical yet effective replacement of Lyman No.2 for the commercial casters.
The Magnum Alloy (Generic name is "Hardball Alloy") is most easily created by mixing equal parts of pure lead with linotype (4/12/84). Doing so gives you the resulting 2/6/92."
Not sure if that is what you have, but the name sounded close! Ofcourse, it could be something else that Terracorp made, too!
OK, not what I was thinking of then. I did find this online:
Taracorp Imaco Inc. | Solders and fluxes
1690 Lowery St.
Winston-Salem, NC 27101
Toll Free: 800-334-5266
Phone: 336-777-8600
Fax: 800-637-6697
Web Site: www.taracorp.com
Hope it helps!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |