311290 Dual Brass/Alum GB mould

[dominicfortune00]

I'll take a 4C GC in brass.

[Blammer]

list updated

[fatnhappy]

Blammer,

Put me down for a 5C Aluminum

[Blammer]

Who wants what for ALUMINUM.

1. no34570 3C drill for probe
2. dutch4122 5C OR
3. dromia 4C drill for probe
4. mibo 2C
5. sundog 4C PAID
6. C1PNR 4C
7. springfield 4C
8. fatnhappy 5C
9. waynes 5C
10. chboats 4C OR
11.
12.
13.
14.
15.

Who wants what for BRASS.

1. starbits 4C
2. bwgdog 2C
3. rugerfan 4C
4. chboats 2C
5. NYbushbro 2C
6. dominicfortune00 4C
7. quasi 4C
8. dutch4122 4C
9.
10.
11.
12.
13.
14.
15.

[quasi]

I am in for a 4 cavity BRASS g.c.

[starbits]

We are half way there. Keep it going.

Starbits

[63 Shiloh]

I am keen for a 4 cav brass mold, just need an idea of production date please?

Looking at a 4 cav brass, 3 GC, 1 PB, dependant upon production date.

Mike

[Blammer]

production date is "who knows" it is dependant on when we get the 15th order. At that point we will be put on the production schedule.

[NYBushBro]

I guess most guys have one of these... but not in BRASS - with a HP!
Hope this stirs some interest...!

[fatnhappy]

Blammer,
I now find myself in possession of a saeco sizer.

Would NOE be willing to grind a saeco style top punch for me, and if so what would be the cost associated with such a service?

[RugerFan]

C'mon folks, get them while they're hot!

[Wayne S]

I'll take a 5 cavity W/ GC ALUM.

[Blammer]

sorry dean, I don't know, you'd likely have to contact NOE directly.

wayne s, you're on the list

[Wayne S]

production date is "who knows" it is dependant on when we get the 15th order. At that point we will be put on the production schedule.

"can't un-ring a bell" or can we ?? Who would be willing to switch their choice of metals to get this one on the production schedule ??
1. Wayne S ,I would be willing to switch from Alum. to brass

[Blammer]

If you want to switch that's not a problem, I can change it!

[Wayne S]

I asked to see who else would be willing to change to make 15 buyers so this design can get on the schedule and delivered before Christmas.
I'll watch this for a week or so to see who else will be willing to switch either way, and see what the mood is, and go from there

[chboats]

I would be willing to switch to a 4 cav Alum if it would speed this up. I am currently down for a 2 cav brass. Either one is good with me.

Carl

[Springfield]

I'd switch from 4 cav al to 4 cav brass if I had to, but the aluminums are ahead right now.

[Blammer]

updated post #49

[Wayne S]

WE need 5 more for the Alum. GB or 6 for the brass GB, as I'ld be willing to switch to brass. Start telling your fellow casters