I'm No. 4 on the list wv109323
I want a 4Cavity, .452 , Plain Base
E-mail: klworkman at suddenlink dot net
I'm No. 4 on the list wv109323
I want a 4Cavity, .452 , Plain Base
E-mail: klworkman at suddenlink dot net
When is this GB going to end? How long after it ends, how long to take delivery?
Sorry in general that I haven't been able to work on the thread the past couple of days. I got some "critical disk error" that turned out to be bogus and a Trojan Horse. I should not have fallen for the cartoony looking "Windows Repair" solution that was offered, but you never get too old for stupid.
Fortunately, the fix was eventually (this morning) easy. Restore to a System Restore point a couple of weeks ago (5/14/11 worked for me). I only offer the gory details in case this Horse is going around and it might be helpful.
Henry,
I second the system restore to a previous date fix.
I've had to use it a couple times myself.
JLK
srn at parrett dot net
put me down for one plain base .452 with handles
Well, System Restore didn't quite get rid of the problem. Neither did AVG, which I paid for. Malwarebytes, which is free, found and removed the Trojan Horse.
There's always something going around.
Any popup on a web site should be considered an attempt to INSTALL a nasty, rather than an offer to fix it.
If you visit one of those web sites, and get that pop up, DO NOT EVEN CLICK ON THE WINDOW CLOSE (X) button! Even that is usually an install command. You have to do Ctl-Alt-Del and open up task manager, and close your browser that way. And, then don't go back to that web site again.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
I was on the fence for this one, but yesterday's session with Miha's 240g .44 Mag mould has shoved me right over..
I'm in for a .454 bevel based - salmon-boy USING comcast DOT net
"Unnh, Negative. I am a meat popsicle."
Chuck
I'd like to get in on this mold -pb is fine.
jeff AT appalachianammo dot com
Jeff's warming up his smelting pot for all that lead we get next Thursday!
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
Duke,
The H&G 200 SWC is my best selling online cartridge.
But let us not hijack the thread
Hi Jeff,
What diameter would you like? 0.452 and 0.454 nominal are available. The 0.452 should cast about 0.453 with straight wheelweight alloy.
And did I mention? We also have an active buy for a Cramer-type hollow point version of this mould.
Henry,
I got in on the GB for Mihec's 200gr rnfp Cramer HP. In fact, I am waiting for it to show up in my mailbox.
This mold in .452 PB should suffice.
Thanks- Jeff
Please put me down for a 4 cavity .452 Plain Base and two sets of handles
contact me at vickiandbob at frontier dot com.
thanks
shotstring (Bob)
Last edited by shotstring; 06-01-2011 at 06:37 PM.
In these parts, often one's very life may depend on a mere scrap of information.
These Miha molds are like lays potato chips, ya can't have just one! This will make #3. jteljet at new dot rr dot com,,-- 452 plain base. Maybe by Christmas?
We're near 40 moulds now.
I've have PM'ed Miha asking his thoughts on the production schedule.
Please include me on this one also that will make six I own of his the .44 that I have been casting with has been a dream makes a newby into an addict.
Hi there, .454 4 cavity plain base for mr ghoglinat hotmail dot com. His stuff if just too good.
I am # 27 on list. I have requested a .454 flat base mold. I use WW with 20 to 50 % plain lead added for a mixture for my 45ACPs. My question is will this mold drop .454 with a 50-50 mixture or only with a WW mixture? When I use the softer mix in my 45ACP guns than straight WW & find that it drops about .001 smaller than WW mixture from my 6 molds. I have ordered the larger .454 & will size to .452 in star lubsizer. Am I going to be sizing down too much with this mold or should I get a .452 mold. I am after accuracy & find .452 works best in my 45 ACP guns. I have slugged barrels. Any thoughts on the size I have ordered? Will I be sizing then too much or should I order .452 with this mold. Help information is requested. Thanks for any thoughts on subject.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |