RotoMetals2Lee PrecisionRepackboxTitan Reloading
ADvertise hereInline FabricationWideners

Results 1 to 5 of 5

Thread: Coleman Handy Gas Plant

  1. #1
    Boolit Bub luna butte's Avatar
    Join Date
    Feb 2011
    Location
    South central Wa
    Posts
    64

    Coleman Handy Gas Plant

    i just picked one up and filled it with white gas and put about 20 psi of air to it but it would not get hot enough to smelt WW's. i monkeied with it for about an hour before abandoning my mission.

    how many PSI do you guys that have one of these beheamoths apply to em to smelt lead?

    thanks.
    Justin Hill

  2. #2
    Perma - Banned


    Bret4207's Avatar
    Join Date
    Mar 2005
    Location
    St Lawrence Valley, NY
    Posts
    12,926
    I googled the "Handy Gas Plant" and came up with a PDF of the operating instructions- http://pages.suddenlink.net/abosch1/...structions.pdf

    I own a plumbers furnace similar tot he Coleman unit. It's very possible that dirt and rust have partially blocked the fuel line. There are instructions in the PDF file for cleaning. I've also found that running carb cleaner in my fuel will help with built up varnishes that slow fuel flow.

    Give it a good cleaning and try it again. Let us know what happens. You should get a large bluish flame from that with a jet like roar if it's like my furnace.

  3. #3
    Boolit Buddy
    Join Date
    Jan 2010
    Location
    Charlotte, NC
    Posts
    160
    Like Bret4207, I own and use a Plumber's Lead Furnace to smelt my WWs into usable, clean casting material. It will melt 40 lbs. of WWs in about 10 minutes, which is what it was designed to do, in order to connect cast iron waste pipe. For more information about these units, see the sticky 'this old pot'.

    In looking at the pictures of this Coleman unit, and reading the directions about it, I don't think I would try to melt lead with it. I don't think it is designed to hold alot of weight. The instuctions say it will heat 2 gallons of water(about 16 lbs) to 170 degrees in about 18 minutes. That temperature is no where near enough to melt lead, and it takes a long time. I would get a turkey-fryer burner, or a lead furnace, and use it, as they have the capacity to get hot enough quick enough to make smelting less of a chore.

  4. #4
    Boolit Bub luna butte's Avatar
    Join Date
    Feb 2011
    Location
    South central Wa
    Posts
    64
    thanks for the link Bret, i spent a bit of time cleaning it last night and i think i got it working correctly now.

    Shaggist, i sure hope it will melt WWs, i figured i was in the clear when i read that it produces 35K btus an hour.
    Justin Hill

  5. #5
    Boolit Mold
    Join Date
    Aug 2011
    Location
    Utah
    Posts
    11

    Smile coleman handy gas plant

    your gas plant will melt WW and lead just fine...I had one a few years back and melted 100s of pounds of WW...I am trying to find one to buy now as I sold the first one I had.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check