I made some 45-45-10 in the blender

**22to45** · 03-22-2011, 11:00 AM

It worked real slick. Took about 2 minutes. I saw the idea to use a blender in another post, but I can't seem to find it. Thanks to whoever it was that suggested it.
Allen

**Gunnerd** · 03-22-2011, 06:52 PM

And what did SWMBO have to say about it?

**selmerfan** · 03-22-2011, 07:07 PM

Did you whip up some margaritas too? If you used "The Magic Bullet" you would have several different cups for different lubes!

**nanuk** · 03-24-2011, 10:23 AM

hmmm.....

**Carolina Cast Bullets** · 03-24-2011, 11:00 AM

Guys, If you value your life, dont use the blender. Go buy yourself one at the cheapest place you can.

When I mentioned it to SWMBO, I was told "If you do, you are in deep S**T!"

Not a good idea. Besides, it mixes so well even without the blender.

Jerry
Carolina Cast Bullets

**Moonie** · 03-25-2011, 06:26 AM

How would one reduce off the volatile solvents in it if using the blender method?

**thegreatdane** · 03-25-2011, 02:51 PM

Hopefully that is not going to be used in the kitchen again...

**Reg** · 03-25-2011, 02:59 PM

Wife catch me doing that little trick and "dead meat " would have a whole new meaning !!!!!!!

**jmsj** · 03-25-2011, 04:18 PM

If I made boolit lube in my wife's blender, she would just laugh and the next time she went to town she would buy the MOST expensive blender she could find !!

**MT Gianni** · 03-25-2011, 04:46 PM

I store mine in a container meant for Perm solution in a beauty shop. Just for future knowledge when you hit a lump or hard spot in the spout don't squeeze harder to get it out unless you want a lot more out than you need.

**Armorer** · 03-28-2011, 03:49 PM

Originally Posted by MT Gianni

Just for future knowledge when you hit a lump or hard spot in the spout don't squeeze harder to get it out unless you want a lot more out than you need.

Yeah,...that little gem of information would have been really useful not so long ago. Luckily the bottle was at least pointed into the bowl and all I had to do was add another hudred or so boolits! That is what happens when I get in to much of a hurry to heat up my bottle of lube before I use it.

Armorer

**gray wolf** · 04-02-2011, 08:50 AM

My wife is the most understanding person I know ( anything gun related )

BUT

If I used the blender for anything but food--I would be hanging off the buck pole. End of story.

So I have my own thrift store one, 2.00 bucks.

BP	Bronze Point	IMR	Improved Military Rifle	PTD	Pointed
BR	Bench Rest	M	Magnum	RN	Round Nose
BT	Boat Tail	PL	Power-Lokt	SP	Soft Point
C	Compressed Charge	PR	Primer	SPCL	Soft Point "Core-Lokt"
HP	Hollow Point	PSPCL	Pointed Soft Point "Core Lokt"	C.O.L.	Cartridge Overall Length
PSP	Pointed Soft Point	Spz	Spitzer Point	SBT	Spitzer Boat Tail
LRN	Lead Round Nose	LWC	Lead Wad Cutter	LSWC	Lead Semi Wad Cutter
GC	Gas Check

Thread: I made some 45-45-10 in the blender

Thread Tools

I made some 45-45-10 in the blender

45/45/10 in the blender

Posting Permissions