I am looking for load info for 32/40 cast loads
found a few in the lyman cast bullet book
any info will be a great help
also it will be loaded in a winchester lever gun [origional]
thank's ovendoctor
I am looking for load info for 32/40 cast loads
found a few in the lyman cast bullet book
any info will be a great help
also it will be loaded in a winchester lever gun [origional]
thank's ovendoctor
ovendoctor,
I use the following in my Stevens #47:
Federal Large Rifle Primer; 14 gr. IMR-4227; Ideal 319162 sized .322"
About 1470 fit/sec
Same bullet sized .323" with 17 gr of either VihtaVouri-N-130 or VV-N-133
Win Large Pistol Primer; 15 gr IMR-4227, Ideal 321297GC sized .323"
In a relined Winchester High Wall:
Federal Gold Medal Match Large Rifle Primer; 13.5 gr XMP-5744 OR 17.0 gr VV-N-133; Ideal 321297GC sized .322"
Same primer; 15.5 gr Reloder #7; Ideal 319162 sized .323"
Cases are whatever I have available, mostly R-P, Rem-UMC and Win "Duke" Commemorative.
Hope this helps.
Tried 6.0 grs. of Trail Boss with 210gr. Hoch and Rem. 2 1/2 primers...grouped well but slow...shows promise.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |