Sorry to be taking so long to get back on this one.
Would like to find something I can offer that will fit
in our standard blocks.
Our large blocks are great but really dig in to production time.
Still working on a drawing.
Swede Nelson
Sorry to be taking so long to get back on this one.
Would like to find something I can offer that will fit
in our standard blocks.
Our large blocks are great but really dig in to production time.
Still working on a drawing.
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
Swede,
I am on the list for one of each, does that count to making it ten on the list instead of just nine?
Anything to move us forward towards scheduling.
2-cavity of each, GC, with probe hole drilled
thanks,
Rich
Last edited by Idaho Sharpshooter; 11-13-2011 at 01:29 PM. Reason: addendum
Just to be clear I'm in for the pointy one.....
I'd be interested in a pointy one.
For fine firearms and shooting requisites visit my Web Site by clicking the link below:
Pukka Bundhooks
I might be interested
Hunt hard, shoot straight, drink GOOD beer!
Would also like to have mine drilled for the probe.....;- )
I'd be interested, but in a somewhat lighter bullet of 275 grains max. I'd be shooting it in a 338/06.
There's interest in a 358365 as well–perhaps the same tooling could be used?
Sam
Last edited by sffar; 12-06-2011 at 10:36 AM. Reason: thought on tooling
Bump
That's why I'm going with this>>>>>http://www.accuratemolds.com/bullet_...=34-310B-D.png. I know it's not a pointed boolit but that's not a requirement for me.
Last edited by scb; 12-10-2011 at 02:54 PM.
"Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety".
Benjamin Franklin
Where an excess of power prevails, property of no sort is duly respected. No man is safe in his opinions, his person, his faculties, or his possessions.
James Madison
And i really need a pointed one...
This is what we can come up with
Was trying to come up with a heavier SP but it will take a complete block redesign.
And that's not in the cards for any time soon.
On the up side we could do either one as a SGB (small group buy)
It would only take 5 orders to get it on the scheduale.
Swede Nelson
Last edited by SwedeNelson; 12-10-2011 at 06:04 PM.
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
Ok, i`m still in for a mold.
Pointy GC 4-holer please.
I'd go for a pointy GC two cavity. Out of curiosity, is hollow pointing one cavity possible?
Sam
Still in for a pointy GC 4 cavity.... SGB is fine with me....
I'd like one of each, 4 cavity GC drill for probe.
For fine firearms and shooting requisites visit my Web Site by clicking the link below:
Pukka Bundhooks
Im still in for either. would love to get the top one as a hollow point, in which case, i would get both
OK, if we're going to delay the pointy 300 grain mould, then I'd be in for a 4 cavity of the pointy 250.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |