NOE 311, 314, 316299 202Gr. RN Re-run

[SwedeNelson]

NOE 311, 314, 316299 202Gr. RN Re-run
Here is the link to the discussion thread:
http://castboolits.gunloads.com/showthread.php?t=106922


.311 body, .300 nose
.314 body, .303 nose
.316 body, .305 nose


We will offer this bullet in .311, .314 and .316 diameters.
One size per block. (No mixing diameter)

This buy is on the schedule.
We will keep the buy open until 2 or 3 weeks before the date on the schedule.
At that time we will close the buy and send out a PM with
a request for payment. We don’t require payment before then.

Prices will be as follows:
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Plus $10.00 Shipping/Handling.
Foreign orders are a additional $10.00 Shipping/Handling.
Prices are subject to change at any time.

You can mix number of cavities in an order to make 5.
We will offer gas check only on this bullet.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

Hollow pointing one cavity and furnishing a double
ended pin would be $35.00 Extra.

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3% sir-charge.
Pay-Pal account:
pbsco1@qwestoffice.net
Make checks and money orders out to:
Night Owl Enterprises

Our mailing address is:
Night Owl Enterprises
1645 W 150 N
Provo, Utah 84601
801 377-7289

Thank you for your interest in this buy.
Swede Nelson

[SwedeNelson]

List of orders
*1 IllinoisCoyoteHunter 2 cavity GC .316
*2 Ron.D 4 cavity GC w/HP .316
*3 rollmyown 4 cavity GC .316
*4 wingnut49b 5 cavity GC .316 drill for probe
*5 wingnut49b 5 cavity GC .311 drill for probe
*6 BCall 4 cavity GC .316
*7 GunSmoke4570 5 cavity GC .316
*8 GunSmoke4570 5 cavity GC .311
*9 B747 2 cavity GC .311
*10 B747 2 cavity GC .314
*11 B747 2 cavity GC .316
*12 lurch 4 cavity GC .316
*13 webfoot10 2 cavity GC .314
*14 Calehedron 4 cavity GC .316
*15 DWM 2 cavity GC .314
16 Mosin Nagant 2 cavity GC .316
*17 870TC 4 cavity GC .311
*18 870TC 4 cavity GC .314
*19 870TC 4 cavity GC .316
*20 roots911 4 cavity GC .316
*21 Sharpshooter3040 5 cavity GC .316
22 dodgyrog 5 cavity GC .316
*23 selmerfan 3 cavity GC .311 w/HP Bullet Base Chamfer tool
*24 AJAX 1 cavity GC .314
*25 Mibo 2 cavity GC .311
*26 Mibo 2 cavity GC .314
27 M1 Tom 5 cavity GC .311
*28 Shawnsmc 4 cavity GC .311
*29 WKAYA 2 cavity GC .311
*30 Calamity Jake 2 cavity GC .314
*31 Rockrat 5 cavity GC .311
*32 Bodydoc447 5 cavity GC .311
*33 SAJTU 2 cavity GC .311
*34 Cimarron Red 2 cavity GC .311
*35 Wildwilly 2 cavity GC .314
*36 WilJen 4 cavity GC .316
*37 rayzer 2 cavity GC .316
*38 rayzer 2 cavity GC .311
*39 Frank46 2 cavity GC .316
*40 craig61a 2 cavity GC .316
*41 craig61a 4 cavity GC .314
*42 DAFzipper 3 cavity GC w/HP .311 drill for probe
43 Muddy Creek Sam 5 cavity GC .316
*44 Fred2892 5 cavity GC .316
*45 Wayne S 5 cavity GC .311
46 mustangpalmer1911 4 cavity GC w/HP .311
*47 rhbrink 2 cavity GC .314
*48 rhbrink 2 cavity GC .316
*49 Euan 3 cavity GC w/HP .316
*50 Littlejack 3 cavity GC .316
*51 trcuda 2 cavity GC .316
*52 trcuda 4 cavity GC .316
*53 Ed in North Texas 4 cavity GC .314
*54 Ed in North Texas 4 cavity GC .316
55 tonyjones 2 cavity GC .311 drill for probe
*56 short-sighted 5 cavity GC .316
*57 X-man 5 cavity GC .316
*58 treekiller 5 cavity GC .316
*59 NYBushBro 2 cavity GC w/HP .311
*60 NYBushBrp 2 cavity GC w/HP .314
*61 Balhincher 4 cavity GC .311
*62 bwgdog 2 cavity GC .314
*63 camotes2 3 cavity GC .316
64 daboone 3 cavity GC .314
*65 8mm 3 cavity GC .311
*66 Linotype 2 cavity GC .314
*67 snafu12 4 cavity GC .311
68 monsoon35 2 cavity GC w/HP .311
69 wittenjr ? cavity GC .316
*70 Rico1950 3 cavity GC .311 Bullet Base Chamfer tool
*71 Pup 5 cavity GC .316
*72 Pup 5 cavity GC .314
*73 sundog 4 cavity GC .314
*74 sundog 4 cavity GC .316
75 Clouseau ? cavity GC .314
76 Clouseau ? cavity GC .316
*77 sleeper1428 4 cavity GC .311
*78 rays308 5 cavity GC .311
*79 hardcast416taylor 3 cavity GC .316
*80 Dutch4122 5 cavity GC .314
*81 FTF 5 cavity GC .311
82 Saigafan2008 4 cavity GC .314
83 Saigafan2008 4 cavity GC .316
*84 Treetop 3 cavity GC w/HP .311
*85 StanDahl 2 cavity GC .314
*86 Naga 3 cavity GC w/HP .316
*87 Midnight 5 cavity GC .314 drill for probe
*88 BeeKeeper 2 cavity GC .316
*89 JimFlinchbaugh 2 cavity GC .314
*90 arcticbreeze 2 cavity GC .311
*91 arcticbreeze 2 cavity GC .311
*92 blackpowder man 3 cavity GC .316
*93 ElDorado 5 cavity GC w/HP .311
*94 ElDorado 4 cavity GC .314
*95 easy ed 4 cavirt GC .311
*96 vernz 4 cavity GC .311
*97 nicholst55 4 cavity GC .311
*98 nicholst55 4 cavity GC .316
*99 chuebner 4 cavity GC .314
*100 24 volts 4 cavity GC .314
*101 miestro_jerry 4 cavity GC .314
*102 junkbug 3 cavity GC .316
*103 uncleskippy 5 cavity GC .314
*104 BoolitBill 3 cavity GC .316
*105 Sharab85 2 cavity GC .314
*106 no34570 3 cavity GC .311 drill for probe
*107 hporter 5 cavity GC .311
*108 Mike_60 3 cavity GC w/HP .311 drill for probe
*109 Mike_60 3 cavity GC w/HP .314 drill for probe
*110 Mike_60 3 cavity GC w/HP .316 drill for probe
*111 hicard 3 cavity GC w/HP .311 drill for probe
*112 speederino 2 cavity GC .316
*113 mallard57 3 cavity GC .311
*114 mallard57 3 cavity GC .314
*115 mjr350 2 cavity GC .316
116 63shiloh 4 cavity GC w/HP .311
*117 Dead Dog Jack 3 caviity GC .314
*118 HodakaGA 2 cavity GC .311
*119 dragonrider 5 cavity GC .314
*120 alamogunr 2 cavity GC .314
*121 alamogunr 2 cavity GC .316
*122 excess650 4 cavity GC .311
*123 calgunner 2 cavity GC .316
*124 Andy_P 4 cavity GC .316
*125 MKastning 5 cavity GC .311
*126 MKastning 5 cavity GC .311
*127 Duett 2 cavity 2GC .316
*128 JZdryfly 2 cavity GC .316
129 99unique 4 cavity GC .316
*130 Centex Bill 3 cavity GC .314
*131 Nueces 5 cavity GC .311
*132 frnkeore 2 cavity 1GC 1PB .311
*133 Zomby woof 5 cavity GC .311
134 m. chalmers 5 cavity GC w/HP .316
*135 peeper1k 1 cavity GC .311
*136 peeper1K 1 cavity GC .311
*137 the big mac 4 cavity GC .311
*138 Aaron 4 cavity GC .311
*139 Aaron 4 cavity GC .314
*140 Aaron 4 cavity GC .316
*141 woodsroad 5 cavity GC .314
*142 10x 4 cavity GC .314
143 BorderBrewer 4 cavity GC .316
*144 Ramslammer 4 cavity GC .314
*145 gleavage 2 cavity GC .314
*146 dmitch 2 cavity GC .311
*147 dualsport 3 cavity GC w/HP .311
*148 ce1911 4 cavity GC .311
149 gvanzegglaar 4 cavity GC .311
*150 Frankenfab 3 cavity GC w/HP .311
*151 runnnin lead 4 cavity GC .311
*152 birdadly 4 cavity GC .316 drill for probe and digital thermometer
*153 chboats 2 cavity GC .311
*154 fasteddie 2 cavity GC .316
*155 Cbenc1 4 cavity GC .316
*156 HARRYMPOPE cavity GC .314
*157 Dave In FloweryBranchGA 2 cavity GC .311
*158 Dave In FloweryBranchGA 2 cavity GC .314
*159 Dave In FloweryBranchGA 2 cavity GC .316
*160 DrB 5 cavity GC w/HP .316 drill for probe
*161 Luke2236 2 cavity GC w/HP .316
*162 adrians 1 cavity GC .316
*163 Johnny_Cyclone 4 cavity GC .311 drill for probe
*164 Mark Daiute 3 cavity GC .314
*165 AnthonyB 2 cavity GC .316
*166 seagiant 2 cavity GC .316
*167 sffar 2 cavity GC .316 drill for probe
*168 atom73 4 cavity GC w/HP .311
*169 Crash Corrigan 2 cavity GC .316
170
171
172


(*) = Paid
Please verify your order.

Thanks
Swede Nelson

[Mibo]

Please put me down for a 2 cavity - 0.311 - aluminum
Thanks

[selmerfan]

WOOHOO! I've been waiting for this for a couple of months now - thanks Al! PLEASE UPDATE!!! my order to a two cavity .311 aluminum with one cavity HP'd. I know that's different than told you, but I want an HP cavity as well and this way my boolit numbers are even...OCD rears it's ugly head.

[Gunsmoke4570]

Al,

Could you update my order (6). I'd like a 4 cavity .316 AND a 4 cavity .311 all GC.

Might as well buy another mold. No need keeping money around. . .I've gotten used to being broke!

[B747]

Hi Al

I didn't know other diams then .316 were available.

Please change my order from:
8 B747 2 cavity 2GC .316
9 B747 2 cavity 2GC Brass .316

To:
8 B747 4 cavity 4GC .314
9 B747 2 cavity 2GC Brass .316

Thanks
Wally

[M1 Tom]

I'm in for a .311 G. C. 5 cavity.

Thanks,

Tom

[shawnsmc]

I'm in for a 4 cavity GC .311"
thanks,
shawn

[wingnut49b]

When the driving bands get bigger, I would guess the nose gets that much bigger too, right?

So my .316 will have a nose that's .305?

I have a Mosin, and I'm ordering a CMP Garand. I would like to get by with one mold, but I want the right one for the Garand too. And new molds are cool.


Andy

[WKAYE]

Al,
Would you please put me down for a 2 cavity Brass, .311 diameter. Thanks.

[Calamity Jake]

I will take a .316 3 cav brass.
Thanks

[IllinoisCoyoteHunter]

I will take a .316 3 cav brass.

Quoted from the first post in the thread:

Single cavity mould $68.00 Ea. Brass $90.00
Double cavity mould $72.00 Ea. Brass $94.00

3 cavs are not available in brass. Only single and double cavs. You can get a 3 cav in aluminum all day long!

[rockrat]

I will take a 5 cav. 311299 GC

[Bodydoc447]

Please add me to the list for a 5 cavity .311 GC.

Doc

[SAJTU]

Please include me on the list for a 2 cavity 311299 GC.

SAJTU

[Cimarron Red]

Al,

I'll take a .311" two cavity GC in aluminum. Thanks.

[wildwilly]

Kindly put me down for a 314299GC/2-cavity Al mould.

[wiljen]

Put me down for a 4 cavity .316 diameter Been waiting on this one.

[Frank46]

Al, please put me down for a two cavity 316299 aluminum mold. When do you want the $$$. Thanks, Frank

[Woodsroad]

When are these sched'd for production?