Ok guys this is the 600gr Cramer HP/FP. Miha will be making this one once we get enough people to sign up.
Ok guys this is the 600gr Cramer HP/FP. Miha will be making this one once we get enough people to sign up.
Last edited by 69daytona; 11-06-2012 at 11:46 AM.
Sorry forgot the pictures of the 600.
Last edited by 69daytona; 09-08-2012 at 04:13 PM.
Put me down for a 2 cav as shown and a 6-cav FP.
JR--the .500 specialist
I'm in for a 2 cavity.
Keavy_13 @ excite.com
Jerry Jr.
You can't buy experience, but you'll pay for it.
.... but what do I know, I'm just a dumb farmer. ~ My Dad.
NRA LIFE MEMBER Upgraded to Endowment Member 5-23-14
I'm in for a 2 cavity with everything on it!!
Last edited by wilddog45; 02-19-2011 at 07:11 AM.
2 Cavity with round and penta pins please...
Sign me up for a two cavity, with everything included please.
Could Miha confirm the number of cavities for this?
And, also.... the HP pin options???
I'm guessing that this one will be a two cavity, but would love him to try a 3 or 4 cavity.
Put me on the list, in any event.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
I would take a 5 cavity FP mold and a 2 cavity HP mold.
Blake
What are the prices? I am assuming the hp will be in the 100 dollar range. though with the crappiness of the dollar one can't be too sure of these things. what is the price of the fp mold?
Last edited by 500bfrman; 02-28-2011 at 10:50 PM. Reason: spelling
Are you mormon? no. Are you catholic? no. Do you know what causes it? yes. and we like it.
This one should run no more than the 700grHP which was 113 with shipping. It will only be a 2 cavity mold due to its length.
Im working with Miha on John Ross's 500gr HP to have it made in a 4 cavity Cramer, he is afraid of it warpping so once its finished being drawn up he can run it through his computer and will let us know, which is promising for future GBs.
I'm on on the 500gr hp 4 cavity as well.
I'm in on this one - 2 Cavity with round and penta pins.
comet1(AT)frontiernet(DOT)net
Thanks.......Harold
Might as well start the list. As of now this is the list. I am still working with Miha to see if he can do the FP in a 6 cavity due to the size of the boolit, The least it will be would be 4 cavity.
The price for the HP will be the same as the 700gr, around 113 the FP only should be right around 100 also. still some fine points to work out.
The 600 like the 700gr due to its size wont work in the Cramer mold so a 2 cavity is all that will be offered.
1. 69daytona, 1, 2 cavity HP and 1, 6 cavity FP
2. John Ross, 1, 2 cavity HP and 1 6 cavity FP
3. South Paw, 1, 2 cavity HP
4 .wilddog45, 1 2 cavity HP
5. Paulinski, 1 2 cavity HP
6. Humbo, 1 2 cavity HP
7. Spartacus, 1, 2 cavity HP and 1, 6 cavity FP
8. Blake Stephensen, 1, 2 cavity HP and 1, 6 cavity FP
9. Happy7, 1. 2 cavity HP
10. 15bobcat, 1, 2 cavity HP
Mr. Daytona, I was post #9 in this thread.
http://castboolits.gunloads.com/show...99&postcount=9
Somehow you missed me on the list. Please ad me.
2 Cav HP, with the reversible pins, and the cut off blank pin set (similar to the 700).
Thanks.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |