Saeco handles fit ONLY Saeco mold blocks??
Saeco handles fit ONLY Saeco mold blocks??
NO. I have an RCBS 2 cav mold that my Saeco mold handles fit. NOW, the question is, (and I don't remember the answer...) did I need to take a file to my Saeco handles to make them fit that mold? I think I did, but I'm not sure. In any case, I KNOW they fit on my RCBS mold just fine, and if I had to modify them at all, it was with a file, nothing more, because I'm not a machinist, I just make stuff work. I may have had to file the inside dimension to line the hole us as well as thinning the handles to make them fit. YMMV
My Saeco handles will not fit a Lyman mold as the center of the handle slot is too thick on the lyman mold. And the Saeco handles will have to be thinned to fit in an RCBS mold. So no, not without modification.
Lyman 22596,225107,225353,225438,225415,225450,225646, 225462,228367,244203,245496,245497,245498,245499 RCBS 22-55-SP,22-55-FP,243-95-SP,243-100-FP, NEI 100244GC-#14, 55 224 GC-#4,225 45-#3 PB, NOE 22-055 SP,MX2-243,Saeco 221 & 243, RD TLC225-50-RF,Lee 22 Bator 6c & 2c HP. Love casting small boolits, let me know if you have one that I don't that you would part with!
Gotcha guys.....thanks mucho!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |