Would one be able to get this boolit to go fast enough to cycle the action of a carbine with a 1:9 twist without leading?
Would one be able to get this boolit to go fast enough to cycle the action of a carbine with a 1:9 twist without leading?
i plan on using it with a 1/9 twist in a 20" barrel.
i use a ir thermometer... but on shiny surfaces (like a shiny still,or bullet mold) you must paint it flatt black to get an accurate reading ... the shiny surfaces shoot the ir out in many directions , flatt black barbeque paint works great ,just spray on the area you want to test temperature. only down side is you cant test the lead in ol drippy, as the surface is shiny so a probe would work best in this case, happy shooting ...
Not about speed, its about pressure/volume at the port. I have my AR-15 cycling perfectly using the 55gr Bator with 18gr of H4895 with a mid-length gas system, carbine length would do just fine with it as well (higher pressure/volume in the shorter gas system)
Remember, medium speed powders rather than fast powders.
Thanks for the advice. What are some other powders I should try out?
Please change mine to 3 cavity, Brass w/ HP pin in 1 cavity & drill for probe.
Thanks,
Tony
New from NOE. Post #87
http://castboolits.gunloads.com/show...t=56593&page=5
Lyman 22596,225107,225353,225438,225415,225450,225646, 225462,228367,244203,245496,245497,245498,245499 RCBS 22-55-SP,22-55-FP,243-95-SP,243-100-FP, NEI 100244GC-#14, 55 224 GC-#4,225 45-#3 PB, NOE 22-055 SP,MX2-243,Saeco 221 & 243, RD TLC225-50-RF,Lee 22 Bator 6c & 2c HP. Love casting small boolits, let me know if you have one that I don't that you would part with!
cool.
I would like a 5 hole with one HP hole. Thanks Mark
Last edited by NWFLYJ; 02-06-2011 at 02:48 AM. Reason: I'm brain dead
Vulcan 20MM = Accuracy by volume.
I would like to change mine to a 3 cavity brass as well. Thanks, Billy
Lyman 22596,225107,225353,225438,225415,225450,225646, 225462,228367,244203,245496,245497,245498,245499 RCBS 22-55-SP,22-55-FP,243-95-SP,243-100-FP, NEI 100244GC-#14, 55 224 GC-#4,225 45-#3 PB, NOE 22-055 SP,MX2-243,Saeco 221 & 243, RD TLC225-50-RF,Lee 22 Bator 6c & 2c HP. Love casting small boolits, let me know if you have one that I don't that you would part with!
Only does 2 cav molds in brass . . . well . . . according to that link, but in the NOE 22-055 re-run, he is offering a 3 cav . . .
John 3: 16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life.
We can run 1 & 2 cavity size blocks in C360 Free-Cutting Brass.
The cost will be as follows.
1 cavity Brass $90.00 plus $10.00 S/H
2 cavity Brass $94.00 plus $10.00 S/H
RG2 cavity Brass $118.00 plus $10.00 S/H
3 cavity small blocks (for .22Cal) $101.00 plus $10.00 S/H
We don't offer any other size Brass blocks at this time.
Lyman 22596,225107,225353,225438,225415,225450,225646, 225462,228367,244203,245496,245497,245498,245499 RCBS 22-55-SP,22-55-FP,243-95-SP,243-100-FP, NEI 100244GC-#14, 55 224 GC-#4,225 45-#3 PB, NOE 22-055 SP,MX2-243,Saeco 221 & 243, RD TLC225-50-RF,Lee 22 Bator 6c & 2c HP. Love casting small boolits, let me know if you have one that I don't that you would part with!
I would also like to change mine to a 3 cav brass thanks
OK . . . I skipped that part I guess, my fault . . .
Last edited by Three-Fifty-Seven; 07-02-2020 at 09:49 AM.
John 3: 16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |