3 Rugers in .45 Colt -- two large frame Bisley Vaqueros and one Blackhawk. One of the Vaqueros was well smithed by Bowen and made even prettier by Mssrs. Fishpaw and Turnbull. The other has had a decent action/trigger job and the cylinder chambers uniformed by Cylindersmith. The Blackhawk is stock and unfired. Have been shooting various factory loads in the Vaqueros with acceptable if not excellent results on paper. No game taken, yet. I want to find suitable hunting loads for whitetails at bowhunting ranges (my own self-imposed limitation). While I understand that each gun is a law unto itself, I'd like to find one load that works in all three. I have to start somewhere, so please tell me where y'all would start. Don't worry - I'll double check all recommendations against manuals. Thanks.