NOE Small Buy: 314-129 Spitzer

[Landric]

MOULDS WENT IN THE MAIL TODAY (10/07/2011) USPS PRIORITY. THANKS!

Howdy Folks,

This is a NOE re-run of the 314-129 Spitzer boolit that was run some time ago. It will be offered with the usual NOE PB and GC options, mix and match is fine in one mould, and at standard NOE pricing. No RG moulds will be available, but hollowpointing is an option at $35 per cavity.

This buy is currently scheduled to run in August 2011.

I will be the honcho of this buy and will accept mailed payments and payments via PayPal (+$4.50 per mould). Please post here what you want and I will update the list regularly. The buy will stay open until Swede Nelson tells me to make the last call before it goes to production.

Here is the drawing:



Here is the finished product from Swede Nelson:



NOE Pricing & Info:

Moulds will be machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

The cost will be as follows:

Standard Molds
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Hollow pointing one cavity and furnishing a double ended pin would be $35.00 extra.
If you want to fashion different HP profiles, an extra blank pin would be $1.50

Shipping and handling will be $10 per order (1 or 2 moulds) and shipped priority mail. If you live outside the United States shipping will be $20 for 4 lbs. or less.

Buyer's List

*1) Landric -4 Cavity 2PB 2GC
*2) sac_fff -5 Cavity 5GC
*3) rollmyown -4 Cavity 4GC
*4) Hardcast416taylor -3 Cavity 3GC
*5) sh00ter787 -4 Cavity 4GC
*6) truckjohn -5 Cavity 5GC
*7) mpkunz -5 Cavity 5GC 1-HP'd
*8) FTF -5 Cavity 5GC
*9) Waldoone -3 Cavity 3GC
*10) 0verkill -2 Cavity 2GC
*11) C1PNR -4 Cavity 4GC
*12) chuck4570 -5 Cavity 5GC
*13) rdlange -3 Cavity 2GC 1PB
*14) missionary5155 -3 Cavity 2GC 1PB
*15) Wayne S -5 Cavity 5GC
*16) MikeS -5 Cavity 5GC
*17) no34570 -4 Cavity 4GC
*18) Echo -4 Cavity 2GC 2PB
*19) 1dbbehr -4 Cavity 4GC
*20) 15bobcat -2 Cavity 1GC 1PB
*21) Woodsroad -5 Cavity 5PB 1-HP'd
*22) wingnut49b -5 Cavity 5GC


* = PAID ORDER

[Landric]

This is now an active "small" group buy.

[SwedeNelson]

Landric

It looks like we have more than five.
I'll get it on the schedule.

Swede Nelson

[0verkill]

Put me down for a 5 cavity. 2 plain base, 2 gas check and 1 gas check hollow point.

[C1PNR]

This is really tough for me. I passed on the first go around because they're heavier than my 311 359 Lyman that are SO good in my older Carbine. But I'm now thinking maybe I should get in on this one.

When do we have to make our final commitment? I've got to think about this one.

[rhbrink]

Put me down for a 4 cavity with gas checks.

[Landric]

This is really tough for me. I passed on the first go around because they're heavier than my 311 359 Lyman that are SO good in my older Carbine. But I'm now thinking maybe I should get in on this one.

When do we have to make our final commitment? I've got to think about this one.

Its not going to run until August by the current schedule, so by the end of June or so. You have some time.

[j20owner]

I'm on the fence, but I'm posting so it'll be easier to find later if I decide to fall off.

[Trapaddict]

Is there a little more room on that fence?

Jeff

[quasi]

I am in for a 5 cavity g.c. mold

[yb2882]

put me in for 2 cavity g.c. mold

[machinisttx]

Wish there was an option for RG molds on this buy.

[indymadcaster]

put me in for a four cavity 1 plainbased 3 GC

thanks

[barefooter175]

I am looking at this bullet and thinking I would give it a try in a TC Contender .30-30 or .30 Herrett. Any reason why this bullet will not work with these applications?

James

[C1PNR]

These are only about 9 grains heavier than what my 311 359's weigh lubed and checked, so I think I need this one to back up the old Ideal.

I'll take one of these in the 4 Cavity, all GC design. Let me know when you need the $$.

[no34570]

Landric
Can I change my order please?
Instead of a 3 cavity mould,I would like a 4 cavity mould and all GC's please.
Sorry about that,but I had a good think about it.

[truckjohn]

Please put me on the list for one 5-cavity model. GC on all...

If you don't mind - PM me with your address for the $$$.

Thanks

[monsoon35]

Please put me down for a 2 cavity (both GC one cavity HP)

[1longshot]

How would this bullet do in a 308 Winchester?

[Landric]

Sorry for my absense for the last few weeks folks, been exceptionally busy at work and home.

I imagine it would make a good plinking load in .308.