Anyone ever use this on a aluminum mold ? I have used it on my motorcycles with good results .Marvin
http://www.nevrdull.com/page5.html
Anyone ever use this on a aluminum mold ? I have used it on my motorcycles with good results .Marvin
http://www.nevrdull.com/page5.html
I told myself when I retired from the Navy that I would never use never dull again.
For the last 9+ years I have kept my word.
Robert
I have done my fair share of bright work. a word of advice never put a wad never dull in your pocket.
No need to polish a mold, so not sure what use it would be.
Bill
If it was easy, anybody could do it.
Uh, Never Dull must be like Flitz.
I bought Sta-Brite anodized insignia as soon as I got tired of polishing my brass with Brasso.
It may remove dark areas and such but you would also have to clean the residue from it out of the mold. Never dull is a wadding cloth impregnated with some form of cleaner. Its great for final polish and cleaning . I use it occasionally on pewter, brass, german silver, and other bright metal work. I would test it on a small area on bluing. Same with wood finshes.
Never Dull is great for that one or two pieces of stained brass that need some special attention or a small (or not so small) run that you don't have time or even the equipment to tumble.
I had thought about using it in the cavities as a final cleaning and polishing . It is not suppose to leave a residue if you wipe it clean . Just wondered if any one had used it and if it helped with bullet release . Marvin
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |