RotoMetals2Reloading EverythingSnyders JerkyWideners
Lee PrecisionMidSouth Shooters SupplyRepackboxLoad Data
Inline Fabrication Titan Reloading
Results 1 to 3 of 3

Thread: Optima Elite 45-70 load using Unique

  1. #1
    Boolit Bub Three Bears's Avatar
    Join Date
    Dec 2008
    Location
    Was Alaska now Louisiana
    Posts
    35

    Optima Elite 45-70 load using Unique

    Have a Optima Elite 45-70 and am using a cast lee 340 gr. I loaded it with 15 grains of Unique and at 25 yards shot one ragged hole. Only had time for the 25yd distance and will try further out next time. Does anyone "know" about what speed these things are going and would this be enough for pig shooting out to 75 yds(thick woods)? Thanks

  2. #2
    Boolit Master
    Join Date
    Jun 2006
    Location
    Pacific Northwest
    Posts
    2,621
    your load should be going somewhere around 1300 fps and should be plenty to kill pigs at 75 yards provided that you know where it shoots. If you zero your ifle for 100 yards and fire it at 50 yards you will get and idea as to trajectory and can copensate but pigs at 75 yads should not be a problem to hit.

  3. #3
    Boolit Bub Three Bears's Avatar
    Join Date
    Dec 2008
    Location
    Was Alaska now Louisiana
    Posts
    35
    NickSS, thanks for the information. In the next day or so I will be able to shot it at both 50 and 100 yds. I was concerned that this load had enough energy to hammer a pig....... I had fired the Hornday Leverevolution and do not care for it - cost, sharper recoil then my 458wm that I used for bears(three) while in Alaska and accuracy. Now using ww dropped in water and as mentioned 15 grs unique.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check