WidenersMidSouth Shooters SupplyInline FabricationReloading Everything
Lee PrecisionTitan ReloadingRotoMetals2Repackbox
Load Data
Page 1 of 7 1234567 LastLast
Results 1 to 20 of 125

Thread: NOE Lee 430-310-RF Clone Group Buy

  1. #1
    Boolit Master Landric's Avatar
    Join Date
    Mar 2009
    Location
    North Carolina
    Posts
    605

    NOE Lee 430-310-RF Clone Group Buy

    THIS BUY IS CLOSED, ORDER IS IN WITH NOE.

    This mould will be offered by NOE as a clone of the Lee 430-310-RF. However, it will be available as either a gas check or plain base, with the usual 1-5 cavity, HP, and RG2 and 4 options, and dropping at about .434 from the mould. Below are the drawings of the GC, PB and HP designs.

    I will be the honcho of this buy and will accept mailed payments and payments via PayPal (+$4.50 per mould). Please post here what you want and I will update the list regularly. The buy will stay open until Swede Nelson tells me to make the last call before it goes to production.

    We are now on the production schedule, currently listed for June 2011. I will start accepting payments now, but payment will not be required until we get closer to production. Assuming we stay on the schedule for June I will send out a PM for payment to those who haven't paid on or about June 1st. PM me for payment information when you want to pay before that.






    Buyers list:

    PM has been sent for payment to those who have not already paid. Thanks!

    *1) Landric 3 Cavity 1GC 2PB
    *2) Landric RG2 1GC 1PB
    *3) Happy 7 RG4 4PB -DRILL FOR PROBE
    *4) Happy 7 5 Cavity 5PB -DRILL FOR PROBE
    *5) GLL 1 Cavity 1GC-HP & 3 extra blank pins -DRILL FOR PROBE
    *6) GLL 4 Cavity 2GC 2PB -DRILL FOR PROBE
    *7) jj850 RG4 4GC
    *8) GL49 RG4 4GC
    *9) Wired54 5 Cavity 5PB
    *10) bburnz RG4 4GC
    *11) DaveD RG2 2GC
    *12) dominicfortune00 4 Cavity 4PB
    *13) Heavy lead 5 Cavity 5GC
    *14) jschmuck 4 Cavity 4PB
    *15) johnch RG2 2GC
    *16) AnthonyB RG2 2GC w/ Extra Pin Set
    *17) jkingrph 2 Cavity 1GC 1PB
    *18) nicholst55 2GC 2PB
    *19) happietoshoot 5 Cavity 5PB
    *20) Drb RG4 4GC



    Moulds will be machined from 2024 Aluminum
    Used for high strength structural and aircraft applications.
    Tensile strength range 30,000 to 63,000 psi
    Sprue plate (blued), alignment pins, and hardware will be
    carbon steel.

    The cost will be as follows:

    Aluminum Moulds-

    Standard Molds
    Single cavity mould $68.00 Ea.
    Double cavity mould $72.00 Ea.
    Three cavity mould $79.00 Ea.
    Four cavity mould $85.00 Ea.
    Five cavity mould $92.00 Ea.
    Hollow pointing one cavity and furnishing a double ended pin would be $35.00 extra.
    If you want to fashion different HP profiles, an extra blank pin would be $1.50

    RG Molds
    Two cavity RG2 HP mould $96.00 Ea.
    Includes one set of hollow point pins
    and one set of flat nose pins.
    If you want to fashion different HP profiles for the RG2 an extra blank pin set of two (2) would be $4.

    Four cavity RG4 HP mould $126.00 Ea.
    Includes one set of hollow point pins
    and one set of flat nose pins.
    If you want to fashion different HP profiles for the RG4 an extra blank pin set of four (4) would be $8.

    Shipping and handling will be $10 per order (1 or 2 moulds) and shipped priority mail. If you live outside the United States contact me, and I will work with you, shipping should be $20 for 1 or 2 moulds.
    Last edited by Landric; 06-13-2011 at 11:23 PM. Reason: Updating Orders
    "The Engine could still smile...it seemed to scare them" -Felix

    Landric

    Honcho for NOE .38-200 Mk. I British Round Nose Group Buy

  2. #2
    Boolit Master


    Join Date
    Jan 2007
    Location
    Highland, Arkansas
    Posts
    1,543
    Actually I want two molds. I still want the 5 cavity PB as well as the RG4. Thanks.

  3. #3
    Boolit Buddy

    Join Date
    Dec 2007
    Location
    Mesa, AZ
    Posts
    350
    I 'spose I may as well get an RG2...........

  4. #4
    Boolit Mold
    Join Date
    Dec 2008
    Location
    South Central Kansas
    Posts
    19
    I'd like one in RG4, gas check, please.

  5. #5
    Boolit Buddy BackWoods Billy's Avatar
    Join Date
    Dec 2010
    Location
    Idyllwild,Ca.
    Posts
    168
    What's the $4.50 for?
    BackWoods Billy

  6. #6
    Boolit Master Landric's Avatar
    Join Date
    Mar 2009
    Location
    North Carolina
    Posts
    605
    Quote Originally Posted by DaveD View Post
    I 'spose I may as well get an RG2...........
    PB, GC, or some combination?

    Quote Originally Posted by BackWoods Billy View Post
    What's the $4.50 for?
    The percentage that PayPal charges, it doesn't apply to mailed payments.
    "The Engine could still smile...it seemed to scare them" -Felix

    Landric

    Honcho for NOE .38-200 Mk. I British Round Nose Group Buy

  7. #7
    Boolit Master


    Join Date
    Jan 2007
    Location
    Highland, Arkansas
    Posts
    1,543
    Alright, we are almost there! I bet by time it is made there will be 40 molds ordered.

  8. #8
    Boolit Buddy BackWoods Billy's Avatar
    Join Date
    Dec 2010
    Location
    Idyllwild,Ca.
    Posts
    168
    Thanks Landric.Will have to wait on this one.
    BackWoods Billy

  9. #9
    Boolit Master
    no34570's Avatar
    Join Date
    Apr 2005
    Location
    East Gippsland,Australia.
    Posts
    1,347
    Landric
    I'll take a RG2 ,mould please,all GC's
    Also can you change my username on the buyers list please,#11,it should be no34570

    Can you PM me or post it here the total cost plus postage to Australia?
    Thanks mate
    Cheers

    no34570

    "I'll tell you what rule we applied sir,We applied rule 3-0-3, We caught them and we shot them, under rule 3-0-3." :Lt Harry " Breaker" Morant at his court martial in January 1902.

  10. #10
    Boolit Master Landric's Avatar
    Join Date
    Mar 2009
    Location
    North Carolina
    Posts
    605
    The mould is $96, shipping to Australia should be $14 for one mould, and an extra $4.50 for PayPal (assuming that is what you want to use, generally best for sales out of the country), total $114.50.

    Also, got your name corrected.
    "The Engine could still smile...it seemed to scare them" -Felix

    Landric

    Honcho for NOE .38-200 Mk. I British Round Nose Group Buy

  11. #11
    Boolit Master bearcove's Avatar
    Join Date
    Aug 2007
    Location
    Rio Rancho NM or Bearcove AK
    Posts
    2,414
    one each RG2 GC

  12. #12
    Boolit Master
    no34570's Avatar
    Join Date
    Apr 2005
    Location
    East Gippsland,Australia.
    Posts
    1,347
    Quote Originally Posted by Landric View Post
    The mould is $96, shipping to Australia should be $14 for one mould, and an extra $4.50 for PayPal (assuming that is what you want to use, generally best for sales out of the country), total $114.50.

    Also, got your name corrected.
    Good on ya mate,when is payment required?
    Cheers

    no34570

    "I'll tell you what rule we applied sir,We applied rule 3-0-3, We caught them and we shot them, under rule 3-0-3." :Lt Harry " Breaker" Morant at his court martial in January 1902.

  13. #13
    Boolit Master Landric's Avatar
    Join Date
    Mar 2009
    Location
    North Carolina
    Posts
    605
    Payment won't be required until a couple of weeks before production (likely several months or more away), but once we have 15 moulds committed and are in the production queue payment will be accepted at any time.
    "The Engine could still smile...it seemed to scare them" -Felix

    Landric

    Honcho for NOE .38-200 Mk. I British Round Nose Group Buy

  14. #14
    Boolit Buddy 500bfrman's Avatar
    Join Date
    Jun 2006
    Location
    Merrill, MI 48637
    Posts
    442
    landric

    I would like 2 extra pins for my hp cavity
    and two extra sets for my rg4 thanks
    Are you mormon? no. Are you catholic? no. Do you know what causes it? yes. and we like it.

  15. #15
    Boolit Buddy

    Join Date
    Dec 2007
    Location
    Mesa, AZ
    Posts
    350
    Quote Originally Posted by Landric View Post
    PB, GC, or some combination?



    The percentage that PayPal charges, it doesn't apply to mailed payments.

    All Gas Checked, sorry 'bout that.

  16. #16
    Boolit Master Landric's Avatar
    Join Date
    Mar 2009
    Location
    North Carolina
    Posts
    605
    Only one more mould to go before we get in the production line. Anyone?
    "The Engine could still smile...it seemed to scare them" -Felix

    Landric

    Honcho for NOE .38-200 Mk. I British Round Nose Group Buy

  17. #17
    Boolit Master Landric's Avatar
    Join Date
    Mar 2009
    Location
    North Carolina
    Posts
    605
    Bump...
    "The Engine could still smile...it seemed to scare them" -Felix

    Landric

    Honcho for NOE .38-200 Mk. I British Round Nose Group Buy

  18. #18
    Boolit Master Landric's Avatar
    Join Date
    Mar 2009
    Location
    North Carolina
    Posts
    605
    OK, we are currently scheduled for production in July of 2011. That date may get advanced because of NOEs new machines. Assuming we stay on a July production schedule this buy will stay open till about June 1st. Please post your wants here and PM for payment info if you want to pay before the buy closes.
    "The Engine could still smile...it seemed to scare them" -Felix

    Landric

    Honcho for NOE .38-200 Mk. I British Round Nose Group Buy

  19. #19
    Boolit Master Landric's Avatar
    Join Date
    Mar 2009
    Location
    North Carolina
    Posts
    605
    Christmas bump, hope you all had a merry one!
    "The Engine could still smile...it seemed to scare them" -Felix

    Landric

    Honcho for NOE .38-200 Mk. I British Round Nose Group Buy

  20. #20
    Boolit Master
    Join Date
    Jul 2008
    Location
    Paw Paw, Michigan
    Posts
    2,008
    Well I'd like in on this, I much like the Lee boolit and always wanted one in a plain base so let's get on board with a 5 cavity plain base model.

Page 1 of 7 1234567 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check