ive been given the go-ahead to get this ball rolling.
its for a NOE 225107 37gr mould.
lots of interest for hornet, and light weight .223 boolits.
discussion here: http://castboolits.gunloads.com/showthread.php?t=99396
pb version:
It would be about 34Gr. .040 shorter and look like this.
confirmed:
landric, 4c, 2PB 2GC. .
bullshop, 5c, gc
bcall, 5c, gc
tonyjones, DS10-SB , GC (one side)/PB (one side), drill for probe.
hatch, 5c, gc
mannyca, 5c, gc
smlekid, 4c, gc
terryt, 5c, 2gc, 2pb, 1hp.
hickory, 3c, 2gc(1hp), 1pb.
trmungle, 4c, 2gc,2pb.
nozombies, 5c, 4GC(1hp),1PB.
swiafb, 5c, gc
verney, 5C, SB
bearcove, 5c, 3GC, 2PB.
mibo, 3cav, gc.
ohiochuck, 5cav, 2 PB; 2 GC & 1 GCHP
euan, 5c, gc, 1hp
kbstenberg, 3cav, gc
ramslammer, 4c, gc.
smokemjoe, 2c, gc.
geezer56, 4c, 2 PB, 2 GC
quasi, 5c, gc
mt chambers, 4c, gc, 1 hp.
Trapaddict, 5c, gc.
Olevern, 10c, one side pb, one side gc.
sharpshooter3040, 5c, gc.
mike60, 5c, 2 PB, 2 GC, and 1 HPGC.
cba257, 2c, gc.
jvg5576, 5c, 3pb, 2gc.
Dougie-UK, 5c, pb.
gmsharps, 2gc, 2pb, 1gchp.
monk2, 5C, 3GC and 2 PB
stubshaft, 3c. gc
dromia, 5c, 3gc, 2pb.
kycaster. 3GC with one cavity HP.
cwme, 10c, 5pb, 5gc.
altheating, 5c, gc.
NordicG3K, 2c, gc, 1hp.
15bobcat, 2c, gc.
badbobgerman, 4c, gc.
czech_too, 4CSB, 3GC, 1PB.
gunsmoke45/70. 5c, gc.
Bodydoc447, 5c, gc.
leftiye, 1c, gc,
coaldust, 4c, 2gc, 2pb.
dr. nick, 5c. 4GC, 1PB.
froggfuzz, 2 moulds: 1. 4c, 2PB, 2GC. 2. 2c, 1PB, 1GC.
matt3357, 3C, 2GC, 1PB
buckndee, 5c, 4GC, 1HP/GC
intel6, 5c, gc.
ill do my best to keep this list updated, but if i miss/mess something let me know.
looking at may for production.
noe info per gb rules:
This buy will be on our SB (Small Bore) moulds.
This is a down sized mould for better heat control.
We will also offer it in a 10 cavity double sided mould (DS10-SB)
The DS10-SB can not be hollow pointed.
Prices will be as follows:
Single cavity mould (Standard Size mould) $68.00 Ea.
Double cavity mould (2CSB) $72.00 Ea.
Three cavity mould (3CSB) $79.00 Ea.
Four cavity mould (4CSB) $85.00 Ea.
Five cavity mould (5CSB) $92.00 Ea.
Ten cavity mould (DS10-SB) $160.00 Ea.
Plus $10.00 Shipping/Handling.
Foreign orders are a additional $10.00
Prices are subject to change at any time.
You can mix number of cavities in an order to make 15.
We will offer gas check only on this bullet.
Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.
Hollow pointing one cavity and furnishing a double
ended pin would be $35.00 Extra.
We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3% sir-charge.
Pay-Pal acount:
pbsco1@qwestoffice.net
Make checks and money orders out to:
Night Owl Enterprises
Our mailing address is:
Night Owl Enterprises
1645 W 150 N
Provo, Utah 84601
801 377-7289