Is anyone aware of a source for 9.3mm cast bullets (e.g., for a 9.3 x 62)?
Many Thanks in advance!
Is anyone aware of a source for 9.3mm cast bullets (e.g., for a 9.3 x 62)?
Many Thanks in advance!
bullets or boolits?
Bullshop has some boolits.
9.3mm molds are hard to come by. You can make a 9.3mm bullet by casting a 0.358" bullet and rolling it with paper. Search the Smokeless Paperpatch forum. All the information you need is there. I cast a Saeco 0.358" 245gr bullet for my 9.3x74R rifle. Thin tracing paper works well for patching. The finished bullets measure 0.368". Expand the case neck with a Lyman 9.3mm M-die before seating the bullet. This system for 9.3mm bullets is hard to beat. No custom molds, sizing dies, gas checks or lubricant is required. It sure beats paying Barns a dollar each for his bullets. They shoot well and lay out the bigest wild hogs.
You will need to hone a 0.358" Lee sizing die to 0.368" if you use thicker paper.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |