Graf & SonsRotoMetals2Lee PrecisionInline Fabrication
Titan ReloadingStainLess Steel MediaBallisti-CastMidSouth Shooters Supply
Results 1 to 3 of 3

Thread: Source for 9.3mm cast bullets?

  1. #1
    Boolit Mold
    Join Date
    Feb 2010
    Posts
    3

    Source for 9.3mm cast bullets?

    Is anyone aware of a source for 9.3mm cast bullets (e.g., for a 9.3 x 62)?

    Many Thanks in advance!

  2. #2
    Banned
    Bullshop's Avatar
    Join Date
    Mar 2005
    Location
    Montana
    Posts
    7,416
    bullets or boolits?
    Bullshop has some boolits.

  3. #3
    Boolit Master Reverend Recoil's Avatar
    Join Date
    Feb 2008
    Location
    Louisiana
    Posts
    253
    9.3mm molds are hard to come by. You can make a 9.3mm bullet by casting a 0.358" bullet and rolling it with paper. Search the Smokeless Paperpatch forum. All the information you need is there. I cast a Saeco 0.358" 245gr bullet for my 9.3x74R rifle. Thin tracing paper works well for patching. The finished bullets measure 0.368". Expand the case neck with a Lyman 9.3mm M-die before seating the bullet. This system for 9.3mm bullets is hard to beat. No custom molds, sizing dies, gas checks or lubricant is required. It sure beats paying Barns a dollar each for his bullets. They shoot well and lay out the bigest wild hogs.

    You will need to hone a 0.358" Lee sizing die to 0.368" if you use thicker paper.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check