Search:

ive been fumbling around the ch4d site but cant find the 101 swaging dies. what section of the site are they under?

Seems like there is still a lot of interest. Can someone get another batch of molds made if there arnt anymore left?

are there any 135gr molds left? slymantis7 at Hotmail dot com

would like to see a GB for a 147gr mold.

Im using epoxy floor paint to coat my bullets. Ive had amazing success with it. Zero leading, great accuracy and no smoke from shooting lead. Shot over 1000 rounds of these through my XDM with no...

Finally got to shoot some of my bullets coated with the epoxy garage floor paint. 3 coats, baked at 100C for 20min for each coat. Load is 124gr from a lee mold loaded at 4.4gr of hp38. I was getting...

Callahan full bore autolock, with a customized trigger double cartridge thorough gauge?

what HF powders gives the best results with piglet method? From the sounds of it some work better than others.

Anyone tried imr4198 with 300blk? Ive got a fair bit of it.
Im in the process of building a 8" SBR AR15 unsuppressed (im in Canada so no suppressors here) with the 155gr lee mold. Not going for...

Hi Danr

I sent you a PM. I have a set of your 224 dies. The larger diameter punch has worn down/rounded off. As a result when I make bullets and I final size them there is a fin being made on the...

What do you think of these:

http://www.canadiantire.ca/AST/browse/6/Tools/PaintStains/FloorMasonry/PRD~0489730P/Armor+Coat+Epoxy+Garage+Floor+Coating%2C+Semi-Gloss+Grey.jsp?locale=en

...

let us know how it works out.
Would epoxy garage floor paint be the same as this stuff?

has anyone had luck without using hbn?

Wow this is very cool. How long before you think you'd have a the reamer to be able to cut these barrels? And do you have any accuracy results, id like to see how these can do out a bit farther...

how deep do you drill the holes for the mold? Im aiming for a 45-50gr core so i can swage 55gr bullets.

Hi
Just wondering what people are using to cast 223 core for 22lr jacketed bullets.
I have a swage dies set on the way and will need something to cast cores with. I have a fair bit of soft lead so...

I have a lyman t-mag press (the one with the manual turret head, not a progressive). I was wondering i this would be strong enough to swage 22lr jackets?

So do you just need a seating die for this to work?
ie. if i got a lee 220 swift seating die, could i swage 40s&w bullets from 9mm brass? would anything else be needed?

HI
Ive got a VZ58 and want to start casting for it.
Right now i have fast burning powders (hp38,clays,700-x,titegroup) and was wondering if there is a load with the 155 or 160gr lee mold that will...

HI
Ive got a VZ58 and want to start casting for it.
Right now i have fast burning powders (hp38,clays,700-x) and was wondering if there is a load with the 155 or 160gr lee mold that will cycle the...

what size brass are you using to make the 9mm jackets?

cool. are you the one selling the dies? and what brass are you using for the jackets?

hi
i tried to find in the past post but probably missed it. what ogive was decided on? I plan on using these for an AR so sounds like the 5 ogive would be best for feeding.

Im assuming it linotype or monotype. Right now my plans are to use clip on ww for 9mm and 7.62 and stick ons and pure lead for cores for swaging. But ill likely hold onto this just in case. Would...

Hi
New person here. Going to start casting bullets soon so i started looking for lead. I ended up picking up some lefter fishing sinker casting equipment and lead from a guy that had belong to his...