Recently bought a lee 0.309 230 grain mold. It drops bullets undersized and isnt working well for my subsonic loads. After powder coating they fell thru the 0.311 sizer without touching. Bullets...
Type: Posts; User: Bait O' Eggs
Forum: Completed Deals
Recently bought a lee 0.309 230 grain mold. It drops bullets undersized and isnt working well for my subsonic loads. After powder coating they fell thru the 0.311 sizer without touching. Bullets...
Forum: Completed Deals
Looking for a mold to cast bullets for my model 92 Winchester lever action. About 80 +\- grains , flat nose. I plan to powder coat. Thanks baitoeggs@hotmail.com
Forum: Completed Deals
probably quicker to cut them in half with a pair of dikes or bolt cutter than pull the bullets if your goal is to destroy them.
Forum: Completed Deals
I am interested in a can of the M193 55gr FMJ bullets, how much is shipping?
Forum: Cast Boolits
I have read the responses and appreciate the comments. Work has decided to block this website, (something about guns) so I only get a chance in the evening to read and was gone for the weekend.
...
Forum: Cast Boolits
I am back to the fountain of knowledge to be told what I am doing wrong again :-(
Bought a Lee 6 position 55 grain 223 mold for loading for my AR. I cast up a couple thousand bullets, powder...
Forum: Muzzleloading.
Thanks, it makes sense, I will recast my bullets with soft lead I have lots of that, wasnt aware I needed something different for the muzzy.
It was about 6 degrees when I got the bullet stuck...
Forum: Muzzleloading.
I had shot the gun the day before my stuck bullet situation, and cleaned the gun right after shooting. This was the first bullet down the hole after cleaning, though I dont usually clean between...
Forum: Muzzleloading.
Still fairly new to the muzzy's. My great plains hunter 54 caliber has been fun but I havent shot it much yet. I bought a box of 20 rounds of the 425 grain great plains bullets. They went in and...
Forum: Rimfire Area
I quit shopping at bimart when they went anti 2nd amendment. They refuse to sell any ammo to anybody less than 21 years old. I dont much like discrimination, age is a protected classification, and...
Forum: Cast Boolits
I have been pouring lead for decades, mostly fishing stuff, used a soup can bent up with a pour spout and a vice grip holding it for about 40 years. I bought a 20lb lee drip o'matic a year ago and...
Forum: Cast Boolits
I welded up one from 1/4 inch plate and it works well, We have shot it with 22lr, 9mm, 357 mag, 45 with no signs of damage, I think it could take a lot more punishment than I throw at it.
...
Forum: Reloading Equipment
Just had my first primer go off when hand priming a brass. It wasnt going in well, I knew something was wrong, sideways or what ever, and didnt want to tear it apart to get the brass out of the shell...
Forum: Reloading Equipment
I paid $120 for all the lumber, there is quite a bit more than shown in the pics. A local lumber broker recuts lumber and sells pallets of it pretty cheap. Nice that it stacks tight to shoot into.
Forum: Cast Boolits
Loaded about 275 rounds of 300 Win Mag, and deprimed what I am guessing is about 3500 223Rem/5.56 in prep to debur primer pockets
https://i.imgur.com/dHIXYnw.jpg
https://i.imgur.com/gsrKq1P.jpg
Forum: Reloading Equipment
Enjoyed this read,,,
My rockchucker has been priming all my shells one at a time for 25+ years. Its a pain to load them one at a time to prime, but I always knew it was in the casing. Keeping...
Forum: Cast Boolits
loaded 40 rounds tonight, 4.4 grains and 1.115 OAL, every round went thru the gun perfectly, slide open at the end of each magazine. Seems they were a bit long for this gun. I think I have the...
Forum: Cast Boolits
Thanks for the thoughts I will try to shorten OAL. It seemed like the easiest adjustment to try first.
I will also back off the powder to 4.4 grains.
Forum: Cast Boolits
Hope this is the correct forum, there are so many forums on this page sometimes it is hard to tell where to ask the question.
Having some failure to battery issues with cast bullets. Not sure if...
Forum: Reloading Equipment
I recently built a bullet trap. It has had 500 hits plus or minus (9mm and 45) to date and shows no sign of damage. 1/4 inch steel.
https://i.imgur.com/SYo8Gtb.jpg
...
Forum: Muzzleloading.
I have to admit I wasnt aware some lubes didnt like BP. I looked at the forum with lots of recipes, and dont know what drew me to Bens Red, but it was the one I chose and mixed up. Got a lifetime...
Forum: Muzzleloading.
Kind of new to ML, I picked up a Lyman Great Plains Hunter a while back. I have shot it a bit and am trying to figure out how to carry all the parts and pieces to make it go bang while in the woods ...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |