On the phone with Dillon this AM, the parts will be going out to me at no charge, the tech asked me if I feel that I could change them out myself , or would I like to return the press to them for N/C...
Type: Posts; User: joelsteinbach
Forum: Reloading Equipment
On the phone with Dillon this AM, the parts will be going out to me at no charge, the tech asked me if I feel that I could change them out myself , or would I like to return the press to them for N/C...
Problem solved! A little bit of lead on the bottom edge of the mold, Heat gun & a bit of mineral spirits and your input has solved my problem, at least it gave me a new caveat to work with. thank...
Yesterday, I cast about 200 bullets with my new TL240gr 430 swc lee 6 cavity mold. Tumble lubed in xlox , left over night to dry. This AM I Started sizing with my Lee 430 size die about one third...
Forum: Reloading Equipment
3 Dillon Presses, and 16 years later, I have never, never, gotten any poor service, advice or information from any of the telephone staff, My parts have always arrived in a timely manner and usually...
Forum: Reloading Equipment
I have 5 in use , I wish I had room for more \
Dillon SQB
2 -Dillon 550 B
Redding T7
Rock chucker
Forum: Boolit Lube !
I am having great success with XLOX and lee TL dies, Can I tumble lube bullets other than TL successfully? I would like to try some of the other more usual types of dies.
Kimber Ultra for every day carry, Smallish, compact fairly light weight, or a S+W M&P love mine
Forum: Cast Boolits
I should have read this first before I started to ask questions that have been answered 100 times before, After discovering the search feature of this site, I feel that most of my questions can...
Forum: Boolit Lube !
Is the 45 45 10 sold from White Label Lube as good as the home brewed.
Forum: Our Chapel
May our Lord keep her safe, she will be in my prayers
Forum: Single Shot Guns
I over zealousness, was to early a reaction, upon examination of my first batch of bullets, about half, are about 2 - 4 grains to lite, I guess it takes more than one session to become a Boolit...
Forum: Boolit Lube !
Sorry for all the questions, I located the search on the site, it appears that I am not the only one with newbie questions.
Forum: Boolit Lube !
I have been reading the info on powder coating, For many years starting in the mid 90's the big fad was moly coating copper jacketed bullets, I still have quite a few of my old stock of 22's and 30...
Forum: Boolit Lube !
Thanks Randy, another question will I get better results, with lube sizer, disregarding the additional cost.
Forum: Boolit Lube !
As a beginner, what would be the best method of lubing non TL bullets, without making the Lyman or RCBS investment. I realize that my initial purchase of casting equipment was mostly a waste, Today...
Forum: Single Shot Guns
I have just started casting today, Unlike the investments in my guns , I have only made a very modest investment in casting, I spent two wonderful hours learning that it takes a little time to turn...
Forum: Single Shot Guns
It was built for 1k it has a 1:12 twist
Forum: Single Shot Guns
She has a really clean action the throat of the barrel is like new, I put about 300 rounds thru her in 1998,have not shot her up until last week. She, is one tagged hole 5round group at 100 yards. I...
Forum: Our Chapel
I would like to thank all who have taken a few minutes from their day to help raise me up. Thank s again
Baruch ASHEM
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |