Search:

My guess is the die. I had a similar situation on .223 mixed brass. I used Lee dies also. For an experiment I ground some off the end of the die allowing it to size farther down on the case. It...

1st bike was a Yamaha GT 80, I was 13. Next was a Honda 185 twin star, I was 14. Then a 1984 750 Honda Interceptor, I was 19. From there it all went down hill, I was hooked. Started road racing &...

I've had better luck w/these. http://www.timesert.com/

I have an 03 2500, 4wd, quad cab, nv5600 with 274392 miles. I bought it used 2 years ago & don't regret it for a second. I haul a Kubota L3430 on a 18' bumper pull with no problems. I haul hay,...

Some odds & ends from a fellow getting out of reloading due to health issues. Some of it he's had awhile looks like.
This is just part of it. There's a Rockchucker press, an old tumbler, brass,...

Do the handle have a mounting hole in it? I have some shop lights on a stand/tripod that look close to that....

I used a kubota L series 24hp 2wd for 10 years brush hogging, 3ft rotary tiller, disc, 5'blade & a single plow. Got along just fine & didn't what I was missing until I bought a L3430 4wd w/a loader....

There's some bad bases on a few boolits. The bullshop lube creeped a little. Curious on the window of mold temp. It's a dual cavity aluminum & I have a probe & thermometer, I just need to drill it...

Got a new mould from NOE awhile back, just now getting around to casting w/it. Started the ProMelt up & the hot plate for the mould. Started casting about 40-50 bullets bringing the mould up to temp...

It's been my experience, a slower burning powder (AA#7, power pistol etc) is going to let the powder drop meter better because you are going to be using larger/heavy charges. It's also gonna spray...

45...never been married... I just want to know with or without beans?

I have a 2002 CRV with 240k+ miles on it. I bought it used in 2008 with 160k on it. Since I've owned it the only things I've had to replace are brake pads, struts, a squeaky serpentine belt, and...

http://i269.photobucket.com/albums/jj51/RWoolever/Marlin%20357/th_MOV00046_zpsug1yyfxo.mp4

16.5gr of 2400, 125gr Montana Gold JHP, WSP. Dead on the money w/every .357 I have. SP101, GP100, Sec.6,...

I'm also a Stihl snob. I have a 029 Super and it's a great saw. I've had it for 10+ years & cut about 10-15 ricks of wood a year for the last 12-13 years. I started out with the Poulan's and decided...

I've been shooting into wood logs for about 5-6 years. These are Hickory stumps from a tree that was blown over from a storm. I've used Oak, Cottonwood, Elm, Sycamore, Cedar, whatever else I could...

(Also any suggestions on how to lube/size these in a 4500 and get them out? I don't like the idea of making a tall plunger but these things simply will not pop out...not much to them.)

I use a...

http://i269.photobucket.com/albums/jj51/RWoolever/AR%2015/20141214_144843_zpsb5e0143e.jpg
Magpul furniture, Bushmaster stripped upper on closeout at JSE surplus, DTI 1/9bbl midlength, Vortex...

Back during the Clinton years I purchased my 1st AR. A Rock River A2 20" Hbar. Took it out a few times, shot it, shrugged and wondered what all the "hype" was about w/the AR's. Put it back in the...

I use a NOE 313640 boolit. It was my 1st NOE RG4 mold and I had a time trying to learn how this thing liked to be used. Finally after lots'o reading what others have tried, cussin, fussin, stompin...

A lesson I learned the hard way about a FC die & the 327mag. With boolits it caused me more harm than good. I had just shot up some factory loads in order to use the brass for reloading. I was having...

Lee also makes a taper crimp die for the 32mag/long, I have one but can't find a part # on it. I've used it instead of a roll crimp and have good results w/it. I have since purchased a set of Redding...

I have a Blackhawk and am in line for a Single Seven when they hit the market, around Oct. I've heard. At the time I purchased the Blackhawk factory ammo was all that was available. I shot it for the...

I'm an Okie but just barely..about 6 miles west of the Arkansas border on I40.
Welcome aboard

I thought I had read another write up about it w/a little more detail but this is 1 write up I've found. #264...Feb. 2010...

I had the cylinder cut to take the AR & not loose the ability to use the acp. Seen it in a Handloaders article by Brian Pierce. Took it to a local smith and had it done in a couple days. Cheap cell...