Search:

I went to the reloadingnetwork and bought their set, on sale for 29.95 and it came with the flashlight, it really made using the Lee tester a snap, I also took the advise of coloring the test area...

Thanks again to all, I had a batch of the lee 105s sized and lubed to .358, I took 10 and ran them thru my lee sizer to .357, my start load is 4.3 Titegroup and the seating depth I'm starting with is...

Thanks again to all, I had a batch of the lee 105s sized and lubed to .358, I took 10 and ran them thru my lee sizer to .357, my start load is 4.3 Titegroup and the seating depth I'm starting with is...

Thanks Again for all your comments, and advise!
Marshhawk

Thanks for the help! I think coloring the flat spot will help as well as a source of bright light!

Marshhawk

Thanks to all for the info, I am going to slug my barrel and and start loading!
Marshhawk

I have a Lee Lead Hardness Tester and find it difficult to use, has anybody come up with a mounting plate to make it easier to operate, looking for some Help!

Marshhawk

Thanks for your input, do you think bullet hardness is an issue!
Marshhawk

Looking for some info on shooting cast in Glock barrels, I've heard you should not do it, what is your take on this.

Marshhawk

Thanks for all your input!
Marshhawk

I'm looking for some bullet options for my 9, has anyone sized a Lee 105 SWC to 356 to shoot in a 9mm, I would think that about 3.0 Bullseye would work.

Thanks, Marshhawk

Hi Beagle, I think I have a couple of bags, I'll check tonight when I get home from work and let you know.
Marshhawk

I will take the 45-201 SWC for $50 and the 311332 180 gr. for $40.00 if there still available!
Marshhawk

I have had good luck using Semi Chrome Polish to finish leementing a mold!

Marshhawk!

Sat. Bump!

Bump TTT

Lee Priming Tools are SPF to RGrosc!
Thanks, Marshhawk

1 RCBS Bench Mount Priming tool with both small and large inserts and the Allen wrench!
$50.00 Shipped

Thanks, Marshhawk

2nd in line for the 358345 if DG31872 doesn't take it , I will!
PM sent Marshhawk

Yes, I have seen these commercials as well!
Marshhawk

Hi Big Bear, No the 13.0 Red Dot load does not require a filler, I did load some light Trail Boss Loads where filler was required, but after a couple of range trips I have settled on the Red Dot load...

Thanks Guys, For all the kind words about my fathers rifle, I bought a used RCBS 200 Gr. mold from Rick B in Juneau AK, he's a great guy to work with, I have been casting and shooting those boolits...

Hi Everyone, Well I ran 50 rds. through my 348 with reduced loads last Friday, 20 rds.- 10 gr. of Trail Boss and 30 rds. of the Ed Harris Load 13.0 Red Dot, both with the 200 gr. RCBS GC Bullet, the...

Well I got some Trail Boss, so I loaded 20 rds @ 10.0 Gr. and another 30 of 13 Gr. Red Dot, I test fired 2 of each and they are both mild, I'm off to the range Friday to see how they group! Marshhawk

I did load up some .348s at 10.0 trail boss, and they are a joy to shoot, I will be able to enjoy this rifle as a fun plinker, not just a bone crusher, I seated to 2.720 so as to not engage the...