Search:

I took the insert out of the die and set the die now it works.
It seemed that the insert was hanging up or something and would not adjust.
Yes I took it apart cleaned it and reset it in the plate,...

Not new and I know how to set up the die It worked the last time I used it. I moved to a different state about 3 yrs ago and just dug it out and now it doesn't work. On the die it says 9mm A4 crimp...

Ya I did all of that pulled it apart cleaned it checked it put it back in it's hole and re set is as the book said.

No original instructions
On the top of the die there is a knob that you use to adjust the crimp it is screwed down as far as it will go and does not crimp the shell to the bullet.

I have a crimp die that says 9mm A4 on it
I have the crimp It is set about 1/8 in above bullet holder and the crimp is screwed in as far as it will go and it doesn't crimp tight.
Any ideas why?

Years ago we did some wax bullets for a .357 with primers and a small amount of powder(Idon't remember the amount of powder maybe 2g) used them in the back yard for quick draw. They would hurt if you...

I take it that it doesn't hurt the barrel at all?

Can you cast wax bullets?

Do you weight your cast bullets?
What weight tolerance do you allow?
What defects do you pass or keep?
Or does it really matter when just plinking?
And or other comments?

What air-soft BB's made from?
Do I need them?

Where can I get the powder at?

Bruntson
Why is a naked statue fine and proper by most?
But not on your gun. Cow pucky
I think if that is done in good taste than it would be a work of art.

I think deprime first has a few more advantages.

Thinking about it, I guess if they are cleaned after depriming the pockets would get cleaned at the same time and the small orifice that leads to the powder would have less chance of any fouling...

I have a sonic cleaner to wash the shells.
I can deprime the shells before i wash them or wash them deprime and prime on my loader.
What would be the proper procedure or does it matter?

I guess he will have to get what he needs.

I have a lee breech lock reloader single stage press
A friend of mine wants to reload 50cal with it.
Will it work for that?