About $15 a gram!
Type: Posts; User: jayhkr
Forum: Cast Boolits
So I took the advice and it absolutely worked. I penned both pins and was able to successfully cast almost 1000 rounds this evening! PC'd about 1/3 of them and had to take a break. But I...
Forum: Cast Boolits
So I've been away from casting for many years and my stash has dwindled to the point that I need to start casting again. I'm using the same alloy as before however something is amiss with my mold...
Forum: Reloading Equipment
Never seen any videos as far as maintenance goes on the SBD on his sight. That's where I ordered my press from. Great guy to deal with!
Forum: Reloading Equipment
So, the internet is full of great information for all sorts of things. However I have yet to find a detailed article with pictures or video of someone performing general maintenance and lubing of...
Forum: Reloading Equipment
I would love an automated system, have no idea how to build one or where to even get the parts for it.
Oh the table it's on is extremely sturdy, I just would prefer to sit and do 1000 at a...
Forum: Reloading Equipment
So I bought a Lee Single Loading Press from MidWayUsa to resize my 9mm. I wanted it mounted upside down so the boolits would fall into a tub instead of fishing the last few out of the sizing die. ...
Forum: Cast Boolits
Ok, got some range time in today finally!! Did a few tests. Ran 15 rounds of Remington 124gr FMJ, 15 rounds of SnS coated, and 15 rounds of my new PC coated cast boolits through my G19. All at 15...
Forum: Cast Boolits
So far my plate has given me no issues shutting off. It may be so old that I won't ever have to worry about it. Can't wait to shoot these Wednesday. Going to do quite a few experiments to see how...
Forum: Cast Boolits
I have slugged my barrel and it came out at .355-.356 as best I could judge.
Actually the color is just a bonus, the fact that I never have to have sticky hands, worry about leading, etc.......
Forum: Cast Boolits
Thank you everyone for the inspiration!! As soon as I get back to my pc (on phone now) I will answer the few questions asked!! So much fun and so much extra I can shoot now!!!
Forum: Cast Boolits
I was told that powder coating would add .001-.002 to the thickness, however these are coming out at .356-.357. I bought a .358 sizing die, is this wrong? Should I purchase a .356 sizing die...
Forum: Cast Boolits
So here is what I had success with. Had my pot at 725*, placed my mold on my hot plate and had it cranked to the highest it would go (no idea it was a "bargain plate" at Savers), Lead was 9#'s COWW...
Forum: Cast Boolits
So are these minor flaws keepable or toss them back in? I don't want to be over OCD, but I kept about 90 of the 150 I casted. I only kept the absolute 100% perfect ones. Pictures soon to come of...
Forum: Cast Boolits
So are these minor flaws keepable or toss them back in? I don't want to be over OCD, but I kept about 90 of the 150 I casted. I only kept the absolute 100% perfect ones. Pictures soon to come of...
Forum: Cast Boolits
Ok, lastly, I turned the pot up to 730* and the hot plate was maxed out. Both sitting there heating while I wrote my last ccomment (on phone , way more difficult than laptop). Did another batch and...
Forum: Cast Boolits
Ok, so I casted again and for the most part everything was dropping just fine. Will minor imperfections like the pics below be an issue or are those no good either?...
Forum: Cast Boolits
Thanks guys, I'm going to reclean the mold, relube it with real beeswax (straight from a bee farm!) and have a go at it again! I appreciate all the help and will report back with the results!
Forum: Cast Boolits
I cleaned the wheel weights and ingotized them prior to putting them in my pot. They were fluxed twice in the main pot before I poured them into the ingots.
Forum: Cast Boolits
It was smoking after my first few batch's. I thought that would be plenty hot. I will leave it in the lead longer next time. Thanks for the suggestion!
Forum: Cast Boolits
So I tried my hand last night at casting my first set of 125gr 356 9mm. Of the 6 in the mold, only 1-2 came out ok. All the others had issues. My pot was a Lee 10# pot with the PID set at 700*. I...
Forum: Lead and Lead Alloys
Oh yes, spent better half of a full day doing all 360+ pounds. Cleaned and double fluxed.
Forum: Lead and Lead Alloys
So I finally got around in ordering what I think is all the equipment I need to finally start casting my own boolits. I already have 2 Lee pots, 10 and 20# and of course the lead. Here's my...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |