Not a PM2, but I got a ProMelt (ladle pot only) when they first came out. Lasted about 8 months before the fan quit working. Sent it back and they sent a new one, as long as you are under warranty...
Type: Posts; User: 2011redrider
Forum: Casting Equipment
Not a PM2, but I got a ProMelt (ladle pot only) when they first came out. Lasted about 8 months before the fan quit working. Sent it back and they sent a new one, as long as you are under warranty...
Forum: Cookin' Recipe's
According to Bear Mountains web site, only their Alder and Oak pellets are 100% of the base wood. All the others are blended with Alder or Oak. Their bags say 100% hardwood not 100% of what the bag...
Forum: Casting Equipment
I have a heater that came with a 45 that I bought here. can make a tracing for you if that will help.
Forum: Cookin' Recipe's
I have had a large Treager grill with the cold smoker attachment for about 8 years. Have been replacing a few parts lately, Firepot wore thru, Induction fan died, and replaced both heat deflector...
Forum: Lead and Lead Alloys
I mine the berm at a Local PD range. I get about 3-5 gallon buckets each time I go. I get quite a bit of dirt that I skim off after sifting out the jackets. Save the jackets as they are worth...
Forum: Casting Equipment
I had an Easy melt, the ladle only pot. The fan quit working I side of a year. They replaced it as they have to parts. As far as I know, they will only back it for a year, then you have to fix it...
Forum: Casting Equipment
I have had the easy melt (ladle only pot) for year and half and it has worked fine. It holds temp very well. I use my large ladle for smelting and pour most of the lead back into ingots to shorten...
Look at magpul, they have covers that cover 6 M loc slots at a time or one slot at a time.
https://www.magpul.com/firearms-accessories/rails-and-accessories/covers
Forum: Cookin' Recipe's
Too bad he passed away last year. His wife or GF not sure which is continuing the channel, but, not close to what it was. Not sure how I stumbled on his channel, but, it was good while it lasted. ...
Forum: Cookin' Recipe's
This reminds me of a you tube on the late Steve Hall's, Shotgun Red channel. Haven't had time to try it yet, but, looks good.
https://youtu.be/yB10tnzHGXE
Forum: Cast Boolits
The wash n wax will also leave thin coat of wax behind, it prevents tarnish thatb you get shortly after using dawn, and makes sizing cases easier.
As to the corn cob sticking in the flash...
Forum: Lead and Lead Alloys
I mine the berm at a local PD range and it is mostly jacketed rounds. It yields about 7.5 BHN (measure with a Cabine Tree. Tester), it works fine for 45, 38, 357 up to 1250+ fps without leading. ...
Forum: Special Projects
22.71. Includes ram limmk and new style handle. Part number they sent me is 2745840, it not listedmon their parts site, so I tjink you would have to call to order the kit.
Forum: Reloading Equipment
Until you have to buy the die blocks and case @ 15.00 for 3 die set. After 3 sets you could have bought the Co-ax and use regular die rings. Most reloaders have more than 3 die sets.
Forum: Reloading Equipment
Looked on this site and they show them back ordered till April fool day!
https://www.creedmoorsports.com/product/3853/New-Items
Forum: Casting Equipment
Glad to see I am not the only one who uses this hammer. I tried the small gunsmith type hammer that has a brass side and plastic on the other, but, the head was to light and really had to give it a...
Forum: Lead and Lead Alloys
I started with cheap Wal-Mart muffin tins and first pour was welded to the pan, had to peel them out like a sardine can. 2nd try, I had some graphite spray from Lowe's that said it was rated to 850...
Forum: Cast Boolits
Started w lee drip o magic bottom pour. Couldn't get it to stop dripping and replaced the pot liner with a solid one with No hole for spout for spout.
When the new RCBS came out I got the easy...
Forum: Casting Equipment
232356
I use this nylon teardrop hammer from Harbor Freight, very light and works well.
Forum: Classics & Stickies
I started with the cheap wall Mart tins and had to peel them out like a can of sardines!
Had a can of spray graphite from Lowe's, can said it was good to 80 degrees, sprayed the pans and the ingots...
Forum: Our Town
Got a bunch of seat dies from palmetto so I can seat with one and a separate crimp for my pistol calibers. Also got some powder expander for 97 cents, usually 12 bucks.
And ordered a new Labradar...
Forum: Our Town
LABRADAR
Got an e mail from Labradar that they have discounted it to 499.00 from 559.00 thru 12-9.
Not all retailers have adjusted yet, found it at Midway and Brownells. Brownells has free...
Both NOE and arsenal have molds, arsenal has a 240 and NOE has a 230. Both are listed at 432 diameter, arsenal says they can modify the mold.
Forum: Our Town
About the same story here, tried Hughes net and was terrible too. Have been on a local wireless system at 3m down and 1.5 up and works fine. Dumped directv and got the Wi-Fi based directv now. ...
Forum: Boolit Lube !
Formulas are different but its in the thread. About 1/3 of each with the Lundmark as I recall from my last batch, think the johnsons was 60 alox and 40 Johnson's.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |