Search:

Mine is now in Tennessee awaiting movement to the western part of the US. I suspect a lot of others have their moulds sitting in Tennessee also.

Mine is working towards the international shipping area. If I read it correctly it's now in Denmark.

while I'm not thrilled with the delay it is nice to know the reason. Makes the wait easier.

I called about a month ago and had no issues getting a live person.

7mm BR is my guess. There's a handgun in that caliber.

The 50/50 I layed out on the bench turned into a puddle.

I've had 5 mixed samples of white label lube and 1 older one from Lyman sitting in the sun on my reloading bench. I'm looking for a lube that can hold up to the summer heat in central WA. I'm glad...

I think you will have a "space" issue and need to push the wad a bit deeper.

good powders for a .308 or similar.

I believe I made some just by running them thru my .375 Win depriming die. Not sure if I had a tapered expander ball in the die.

I'll be glad when this finally goes to cutting and delivering moulds. I've been having problems getting an accurate load in my .357. Found out the mould thought was big enough mikes out at .356 as...

Do you have an "M" die to bell the case mouth? I didn't see any info on this.

Are both the tools with handles intended to hold the cases?

no extra conversion kits. When I bought it I thought my 550 dies would fit. They don't so I decided I'd get rid of the Square Deal.

I got one set up for .40 that needs a new home.

what shell holders comes with it and what brand shell holders are used. I'm looking for a .308 sized base as I use a .30BR. If it does fit a .308 sized base I'm interested. Or... if it comes with...

As others stated above, an M die is needed to flare the case mouth for your cast. Good luck with your progression/obsession, whatever shooting cast bullets is called.

I ordered a barrel for my Glock from Lone Wolf. Per Mapquest they are 162 road miles from me. The barrel went from them down thru Oregon to Portland, then back to Spokane, on to Wenatchee and...

I think I also need to ask for handles.

Max, you can take me off this one. I signed up on the one that's in the active group buys. thanks, Bill

I will take a 4 cavity brass HP with all pins. sbwarner at nctv dot com.

I must be at Defcon 6 as I have friends going thru my powders. Must be Defcon 6 for components but I need to assemble them into ammo. Waterfowl shotgun ammo I think I have enough for the next 6...

I had a number shoot good groups. The 31141 was the tightest, the RCBS 180 FN was real close and then next was the RCBS 180 SP and the NEI 311 190. I set records shooting all of them. I switched...

Maven, if you're still waffling after 2 years on buying Titegroup (noticed this was an old post) here's a Hodgdon's website I use and it has a titegroup load for the .44 Mag. It is a bit steeper...

Rex, I mis-spoke earlier when I said I was getting a bigger bullet. Had a casting session this morning and while letting the sprue harden and the mould to cool down a bit, I measured a cast bullet...