Search:

You read that right.

Any suggestions on how to remove lead spatter from a scope?

The porting on my revolver threw a bit of lead onto the scope body, was interested if anyone knew any "easy"...

I've developed loads under 600fps with a 173gr boolit (Keith I believe)..... 1-1.5gr of 231 I believe (I'd have to check my records). Hits to point of aim at 25yds, but the entire boolit profile is...

45gr CCI Suppressor Ammo will also do the trick

You are going to have a blast!!!!

Alot of good info here, on equipment, etc.

What we did, to mitigate the mirage
1) start shooting early in the AM
2) set the shooting bench in the bed of...

Thanks for the comments.... this has now moved to the shortlist, and now the Weatherby Camilla has to be reviewed.

Thanks again!

Does anyone have first-hand experience with the savage lady Hunter?

My wife is in the market for a new rifle and I am curious about the fit of this lady specifically geometry. We are unable to...

I recently ran across a "modified" Stevens 25 relined and converted to 17M2.

Does anyone see an issue with the strength of this action when paired with this new cartridge?

OK, buffalo arms sells ammo for this, but in two different headspaces? (0.060 and 0.070) Any easy way to measure?

I've read that 45-70 rims have to be "thinned) or "trimmed" for them to fit into...

It has been sporterized, and has no barrel bands nor sights.

I'm interested in what caliber, and type of rifle this is. The best I can determine is that it's a 8x58 RD

108603108604108605

Any ideas?

http://www.gunsandammo.com/ga-vault/ga-vault-3-guess-gun/

+1 on the Weaver V3. (1-3 x 20)

I've had one on a 673 guide gun in 350 mag for over 14 years. No problems after 1000's of rounds. Even hundreds of 250grainers at 2500 fps!

Here's a listing for one similar...

http://www.armslist.com/posts/21436/kansas-city-shotguns-for-sale-trade--stoeger-luger-12g-semi-auto-shotgun

Does anyone have any information on this semi-auto shotgun?

It appears to be pre-benelli, and I cannot find any information about it; good or bad.

Anyone ever heard of this stuff?

I have access to a few boxes of this stuff, and it appears to be military.

My concern is that is the +P++++ for Submachine gun use only, and that I couldn't...

No filler used.

Once I started getting to and above 2000fps with ACWW the groups went to 5"+ in a hurry.

50/50 ACWW/lino settled them back down to 3", but I'd prefer the extra accuracy over...

40.0gr of H4895 pushed the RCBS-200-FN to 1800 fps out of my Remington 673.

1.75" groups at 100yds consistently.

ACWW sized 0.359, 206.4gr lubed and checked, with no leading

Has anyone here fired one of these things? I had the opportunity to handle one, and I was impressed. It felt alot more solid/formidable than I expected....... the guy behind the counter could only...

H&R 20 ga, paid $60 for it new from Kmart.
Shot it so much, had to replace the firing pin 3 times.

Long since traded away.

The butt plate has hand inscribed dates (basically a receipt) on it from 1925.

That site shows a mfg date of 1940.

Any insight would be appreciated.

What portion of the serial number dictates the date of manufacture

Any idea what the date of mfg the serial number A113XXX is?

I heard a new one today......

Lead boolits are alright to shoot, but don't use a gascheck!!! They'll come off and get lodged in your barrel and you'll ruin your rifle!!!

Has anyone ever heard...

UPDATE

The loaner rifle has been purchased!!

Glenfield model 30A, 30-30, with a 4X apollo scope (which I have never heard of).

It was a fun search!!

Thanks for all the input!

Just shot one of these today. Was hitting about 6" low at 15yds with factory 158 round nose, and about 15" low with 140gr handloads.

Any guidance on what bullet weight/velocity and/or loads these...

Give me some ideas for a cheap loaner deer rifle. Something used and in a common "Wal-Mart" caliber (ammo available at Wal-Mart).

Cheap is relative, but give me some rifle ideas, with prices that...