Search:

Everything sold thank you

Lot 3 sold thanks

All fired brass is cleaned sized and deprimed.its ready to load.
Lot 1 # 38sp 227 nickel 71 brass 30.00 tyd
Lot 2 38 sp new remington nickel 200 cases. 45.00tyd.
Lot 3 172 fired 44 Russian brass...

Hey guys i was priming some 44s today and noticed some rounds wouldnt go into the shell holder at all. Ive never ran into this problem before. Would this be a brass issue or shell holder issue.

I should mention that im loading these for my sbh and a friend's rifle

ive shot loaded some of the noe over 18gns of 2400. oal of 1.60 it is very accurate out my sbh. what hardness would you guys recommend for deer or hogs

I also have some 250gn noe TL432-243RF. also lyman 429667 boolits if either of those are good choices

hey guys just wondering if anyone has tried this boolit for deer. im looking to load something up for my super blackhawk. I like the lee molds and was wondering if this would be a good choice. or if...

well I never thought of my eyes being the problem. if i close left eye things are blurry out of my right eye and im right eye dominate. I guess i need an eye exam.

I have a 1 year old Mueller 4x16x50. im having a couple issues with. The first is blurry targets im shooting at 1 inch orange dots and they blur so much it looks like theres 2. Ive read and tried all...

how does a press get sprung. and im trying to get ahold of lee now. thank you

So I took the die to a friend who has a rcbs single stage. his is a cam over we adjusted the die in his press to a medium cam over. brass works perfectly. I have a lee breach lock it doesn't cam...

the expander plug is .241. I took the plug out of the die it does the same thing. im going to try taking some off the shell holder and report back

I just took a fired untrimmed case measuring 2.040 it cycles fine. I took the case in the pic thats been through the sizer. its trimmed to 2.034 it is very hard to close. so i dont think its trim...

ive trimmed brass to 2.035. per my sierra manual

ok so how do i remedy that

new to rifle reloading. been reloading shotgun and pistol for several years now. someone said to put magic marker on a sized case and see where it rubs when you chamber a round so i did

i meant neck

I took magic marker too a case. it is rubbing off the shoulder.233464 heres a pic

i measured a case from the mouth to the shoulder.its definitely pulling the shoulder down. i can feel it pull really hard in the die

I thought i had it figured out turns out i dont. Today I shot 8 rds picked the brass up and the bolt would cycle fine. so i lubed them put in sizer. and again they are hard to cycle the bolt.right...

I figured out my problem I posted i had my barrel on a hard surface. infact today i put 3 shots in 1 hole. i have more testing to do but i think it will go better now.

yes i realize my problem is where i was putting the barrel and not the stock.

figured it out i was going by hornadys instructions on setting up sizing die. i screwed the die in a 1/4 further according to rcbs die instructions. the brass works like it should now

hey guys im reloading for a Remington 700 sps in 243. im using hornady full length sizing die and my reloads are hard to close the bolt. and hard to open the bolt once its closed. factory rounds dont...